Rack-A-Tiers 77455 Bend-All® M...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$64.64
Rack-A-Tiers 77455 Bend-All® Manual Cable Bender, Aircraft Aluminum

Rack-A-Tiers 77455 Bend-All® Manual Cable Bender, Aircraft Aluminum

(No reviews yet) Write a Review

Model: 77455

In Stock (leaves warehouse same day if ordered before 3pm ET)

$64.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Rack-A-Tiers 77455 Bend-All® Manual Cable Bender, Machined Aircraft Aluminum

The Rack-A-Tiers 77455 Bend-All® is a manual cable bender machined from aircraft aluminum, built to give electricians a lightweight yet durable hand tool for forming clean, consistent bends in large conductors. Designed to cover a 3 AWG to 500 MCM cable range, this bender is engineered for professionals who need a dependable, jobsite-ready solution for shaping heavy-gauge cable without the bulk or cost of hydraulic benders. The precision-machined aluminum construction keeps the tool light enough for all-day handling while maintaining the strength required to form accurate bends on demanding commercial and industrial wiring projects.

Key Features

  • Cable Range: Rated for 3 AWG through 500 MCM cable, giving electricians a single tool that covers a wide span of conductor sizes on the job.
  • Machined Aircraft Aluminum Construction: Precision-machined from aircraft-grade aluminum for a durable, lightweight build that resists wear while staying manageable for hand use throughout a full shift.
  • Manual Operation: Fully manual bending action means no batteries, hydraulics, or power source required — just grab the tool and go, making it ideal for panel work, switchgear, and tight enclosure bends where portability matters.
  • Bend-All® Design: Part of the Rack-A-Tiers Bend-All® line, purpose-built to deliver consistent, repeatable bend geometry across a broad range of cable sizes without swapping tool heads or dies.
  • Jobsite-Ready Durability: The machined aluminum body is built to hold up to repeated use in demanding commercial and industrial electrical installations, from new construction to service and retrofit work.
  • Compact, Portable Form Factor: Lightweight enough to carry in a tool bag or truck box, this bender is a practical alternative to heavier hydraulic benders when a fast, accurate hand bend is all that's needed.

Technical Specifications

  • Product Type: Manual Cable Bender
  • Series: Bend-All®
  • Material: Machined Aircraft Aluminum
  • Cable Range: 3 AWG – 500 MCM
  • Operation: Manual, hand-operated

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Panelboard and Switchgear Cable Routing
  • Large-Conductor Service Entrance Work
  • New Construction and Retrofit Wiring
  • Electrical Contractor Field Tool Kits

Why Rack-A-Tiers?

Rack-A-Tiers builds tools engineered for the realities of the electrical trade, and the 77455 Bend-All® cable bender reflects that focus with its machined aircraft aluminum construction and wide 3 AWG to 500 MCM cable range. Electricians get a durable, portable manual bender that delivers consistent results without the weight or complexity of hydraulic equipment. It's a practical, reliable addition to any electrician's toolkit for shaping heavy-gauge cable on demanding job sites.

Manufacturer Resources

Product Specs

list_batch:
RAC-20260924
Product Type:
Cable Bender
Series:
Bend-All
Department:
Electrical
Product Subgroup:
Conduit Benders
Product Material:
Aircraft Aluminum
Product Group:
Electrical Installation Tools

Rack-A-Tiers 77455 – Frequently Asked Questions

1) What cable sizes will the Rack-A-Tiers 77455 Bend-All bender handle?
The 77455 Bend-All covers 3 AWG through 500 MCM, so it spans feeder and service-size conductors with one tool. There are no dies or heads to swap within that range. Anything smaller than 3 AWG you will generally bend by hand; anything above 500 MCM is outside what this bender is rated for.
2) Is the Bend-All cable bender manual or hydraulic?
Fully manual, hand-operated. No batteries, no pump, no power source. For an electrician making a handful of terminations in a panel or switchgear cabinet, that means nothing to charge or bleed, and nothing to haul up a ladder. If you are bending hundreds of large conductors a day, a hydraulic bender is the better fit; the 77455 is the fast hand-bend alternative.
3) Will this cable bender work for tight bends inside a panel or switchgear enclosure?
That is the main use Rack-A-Tiers built it for. The Bend-All is compact and hand-operated, so it works in panelboard and switchgear cable routing and in tight enclosure bends where a hydraulic head will not fit or is not worth setting up. Other stated applications include large-conductor service entrance work and retrofit wiring.
4) Can I use the Bend-All 77455 to bend EMT or rigid conduit?
No. It is a cable bender, not a conduit bender, rated for 3 AWG to 500 MCM conductors. For EMT, IMC or rigid pipe you need a hand bender or hydraulic bender sized to the pipe diameter.
5) What is the Rack-A-Tiers 77455 bender made of?
Machined aircraft aluminum. That is the reason it stays light enough for all-day hand use while still taking the force needed to form 500 MCM. Aluminum also means no rust in a damp truck box.
6) Do I need accessories or dies to use the 77455 Bend-All?
Nothing additional. The Bend-All forms its bend geometry across the whole 3 AWG to 500 MCM range without swapping heads or dies, and because it is manual there is no battery, charger, or pump to buy alongside it.
7) What part number should I order for the Rack-A-Tiers Bend-All cable bender?
Order Rack-A-Tiers model 77455. It is sold as the single Bend-All model, with no size or finish options to specify.
How fast can I get the Rack-A-Tiers 77455 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rack-A-Tiers 77455 come with a warranty?
Absolutely. The Rack-A-Tiers 77455 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rack-A-Tiers 77455?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Rack-A-Tiers 77455 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!