Klein Tools 53002 Regular-Poin...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$103.53
$52.19
Klein Tools 53002 Regular-Point Drill-Bit Set, 13-Piece

Klein Tools 53002 Regular-Point Drill-Bit Set, 13-Piece

(No reviews yet) Write a Review

Model: 53002
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$103.53
$52.19
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Regular-Point Drill-Bit Set, 13-Piece

  • Warnings

    • Never use on or near live electrical circuits.
    • Read and follow safety instructions in power tool owner’s manual.
    • Always ensure that you and persons in the vicinity wear approved eye protection.

  • Features

    • Black-oxide Finish Reduces Chip Welding
    • Lightly roughened surface has higher lubricity for easier chip flow
    • Standard jobber length
    • Black-oxide finish reduces chip welding
    • Hinged metal box with one stand-up bit holder
    • General-purpose, high-speed bits for reliable performance in a wide range of materials
    • Made in USA


53002 - spec sheet

Manufacturer Resources

Spec Sheet

Product Specs

Item Depth:
6.0750 in
Item Height:
0.4500 in
Item Weight:
0.6000 lbs
Item Width:
3.8250 in
Number Of Pieces:
13
Department:
Electrical
Product Group:
Power Tools & Accessories
Product Subgroup:
Drill & Driver Bits
Product Type:
Drill Bit Set
Product Details:
Regular-Point Drill Bits
Product Material:
Steel
Product Weight:
9.6 oz (272 g)
Product Depth:
6.075 in
Product Width:
3.825 in
Product Height:
0.45 in
Country Of Origin:
United States

Klein Tools 53002 – Frequently Asked Questions

1) Can I use these bits to drill into an energized panel or live circuit?
No. Klein states plainly that these bits are never to be used on or near live electrical circuits. They are not insulated tools. De-energize and verify before drilling, follow the power tool manual's safety instructions, and make sure everyone nearby is wearing approved eye protection.
2) How many bits come in the Klein Tools 53002 drill-bit set, and what are they made of?
The Klein 53002 is a 13-piece set of steel regular-point jobber-length twist bits with a black-oxide finish. They are general-purpose high-speed bits meant for a range of materials, so one set covers most electrical rough-in and MRO drilling rather than being tied to one substrate.
3) Will the Klein 53002 bit case fit in a tool pouch or a van drawer?
The hinged metal box measures 6.075 x 3.825 x 0.45 inches and the whole set weighs 9.6 oz (272 g), so it drops flat into a pouch pocket, bucket organizer, or shallow van drawer. The case has one stand-up bit holder so you can see which size is missing before you pack up.
4) Are these regular-point bits or split-point, and does it matter for drilling steel?
The 53002 is a regular-point set. A regular point generally wants a center punch or pilot mark to keep it from walking on smooth steel; a split point self-centers. If you are drilling a lot of unpunched sheet metal or enclosure sides, a split-point set is the easier choice. For wood, plastic, and punched or marked metal, regular point is fine.
5) Will jobber-length bits be long enough for drilling through framing or thick stock?
These are standard jobber length, which is the common general-purpose flute length and is sized for typical plate, panel, and moderate-depth work rather than deep boring. If you are drilling through a 2x stud or a thick timber, a longer bellhanger or auger bit is the right tool instead.
6) What does the black-oxide finish on these Klein drill bits actually do for me on the job?
It cuts down on chip welding, where hot swarf fuses to the flute and the bit starts burning instead of cutting. The lightly roughened surface also gives higher lubricity so chips clear the flute faster. In practice that means longer life drilling steel strut, panel enclosures, and plates than a plain bright-finish bit.
7) Is the Klein 53002 drill-bit set made in the USA?
Yes, the 53002 bits are made in the USA. That matters if you are buying for a job with domestic-content purchasing requirements or a public agency preference.
8) What is the Klein part number I should order for this 13-piece bit set?
Order Klein Tools 53002. That is the manufacturer part number for the 13-piece regular-point drill-bit set in the hinged metal case, and it is a single configuration, so there are no finish or size options to pick.
How fast can I get the Klein Tools 53002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 53002 come with a warranty?
Absolutely. The Klein Tools 53002 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 53002?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 53002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!