You may also like
Replacement Bit 4 mm Hex & 5 mm Hex
32554 - spec sheet
Warnings
- Always wear approved eye protection.
- Do NOT use to pry or chisel.
Features
- Contains two (2) bits
- Tip sizes - 4 mm and 5 mm
- Fits all Klein Tools 2-in-1 (67100), 10-in-1 (32477), 11-in-1 (32500) and 10-Fold (32535-32539) Screwdrivers/Nut Drivers
- Precision-machined tips for exact fit into fastener
32554 - spec sheet
Manufacturer Resources
Product Specs
- For Use With:
- 10-in-1, 11-in-1 and 10-Fold™ Multi-bit Drivers
- Item Depth:
- 5.1750 in
- Item Height:
- 0.1800 in
- Item Weight:
- 0.0450 lbs
- Item Width:
- 1.7100 in
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Screwdrivers & Drivers
- Product Weight:
- 0.7 oz (20 g)
- Product Type:
- Replacement Bit
Klein Tools 32554 – Frequently Asked Questions
1) How many bits come in the Klein 32554 and what sizes are they?
Two bits, one 4 mm hex and one 5 mm hex. It is a metric hex pair only, so if you need SAE hex or Torx tips for the same driver you will have to order those separately.
2) I stripped the hex bit in my Klein 11-in-1 driver. Can I just replace that one bit?
Yes. The 32554 is a replacement bit pack rather than a whole driver, so a worn or rounded 4 mm or 5 mm hex tip in an 11-in-1 (32500), 10-in-1 (32477), 2-in-1 (67100) or 10-Fold driver gets swapped out without buying a new tool. That is the usual MRO move when one tip goes and the rest of the driver is fine.
3) Will the 32554 hex bits work in an impact driver or drill?
No. These are replacement tips for Klein multi-bit hand drivers, and Klein warns against using them to pry or chisel. For powered hex driving, use bits rated for impact use instead.
4) Are 4 mm and 5 mm hex bits the sizes I need for metric set screws on equipment panels?
4 mm and 5 mm are common metric hex socket set-screw and cap-screw drive sizes, and the 32554 covers both in one pack. Tips are precision machined for a close fit in the fastener, which is what keeps you from rounding a set screw on a motor coupling or panel latch. If your fasteners are SAE hex, these will not seat correctly.
5) What is the Klein part number to order for the 4 mm and 5 mm hex replacement bits?
Order Klein Tools 32554. That single number covers the two-bit pack containing both the 4 mm and the 5 mm hex tips.
6) How is the Klein 32554 bit pack sized and how much does it weigh for stocking in a truck bin?
The carded pack measures 5.175 x 1.71 x 0.18 inches and weighs about 0.7 oz (20 g). Small enough to hang on a pegboard or drop into a van drawer alongside spare driver tips.
How fast can I get the Klein Tools 32554 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 32554 come with a warranty?
Absolutely. The Klein Tools 32554 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 32554?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 32554 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.