Rockwood 802 Medium Coat Hook , Satin Chrome Finish

The 802 medium coat hook has a 3 inch projection, with a body measuring H: 1-1/2", W: 1-3/16". That 3 inches is enough to hold a heavy coat on a hanger rather than just a towel loop, and it is also enough to matter in a tight corridor or a toilet compartment where a protruding object can catch a shoulder. Measure your clear width before mounting it on a door back in a narrow stall.

Two #6 x 3/4 inch round head wood screws ship with the 802. Those bite into wood only, so they work on a solid wood door, a wood stile, or a hook mounted into blocking. On drywall with no backing, or on a hollow metal door or partition, the supplied screws will not hold a loaded coat hook and you will need anchors or machine screws sized to the 3/4 inch depth the hook was drilled for.

The Trimco 7010 fOCAL robe hook and stop combines both functions in a single unit, where the Rockwood 802 is a hook only with a 3 inch projection and no bumper function. On a restroom partition or a door that swings into a wall, the 7010 handles the hook duty and the stop duty from one mounting point and one set of holes. If the opening already has a floor or wall stop, the 802 covers the hook alone.

Cast brass is the substrate, finished in 626 satin chrome. Brass under the plating means it will not rust if the chrome gets scratched in a locker room or a bathroom, which is why cast brass hooks last in wet areas where a plated steel hook blisters.

The Rockwood 802 is a single medium coat hook, so it takes one coat or one bag per hook, which suits a restroom partition, the back of an office door, or a row of hooks in a corridor where you want a fixed count. If you need to hang a coat and a bag on the same point, a double is the right call: ZenSupply carries the Deltana 55D2010 double robe hook in solid brass, the Deltana 88DRH double, the Emtek 2306 sandcast bronze double hook, and the Orca 4854 Blakely double robe hook. Doubles put both loads on one anchor point, so make sure your substrate can take it.

No. The Rockwood 802 is a coat hook only, mounted with two #6 x 3/4 inch wood screws and doing nothing to control door swing. If you want one piece of hardware doing both jobs on a restroom or bedroom door, the Trimco 7010 fOCAL is a combined robe hook and stop. Using a plain hook as an improvised bumper puts the whole door's momentum through two small wood screws and will pull it out of the substrate.

The Rockwood 802 is a single medium coat hook. For two hanging points from one mounting position, the double hooks in the set include the Deltana 55D2010 double robe hook in solid brass from the 55D series, the Deltana 88DRH double robe hook in solid brass from the 88 series, the Deltana BBS2010 double robe hook from the BBS series, the Orca Hardware 4854 Blakely double robe hook, the Orca Hardware 4954 Whidbey double robe hook, and the Emtek 2306 sandcast bronze double hook. A double lets a guest room or locker area hang a coat and a garment bag off the same anchor pair, which matters when the door stile only gives you one place to drill.

The Rockwood 802 is cast brass. The Emtek 25050 robe hook is wrought steel and the Emtek 2306 double hook is sandcast bronze, so both give a different base material for the same hanging job. Material choice usually follows the environment and the finish family you are matching across the rest of the room rather than the hook itself.

Rockwood hardware is used across institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant work, and the 802 is cast brass rather than stamped, so it holds up to that kind of traffic. Note that the two supplied #6 x 3/4 inch wood screws are the weak point in a high-abuse setting: in a school or detention corridor, mount through solid blocking or upgrade the fasteners rather than relying on drywall.

The Rockwood 802 is a plain medium coat hook in cast brass, shaped for architectural use. For decorative profiles, the set includes the Orca Hardware 2753 Cypress robe hook from the 27-Cypress series, the Orca Hardware 3654 Swirl robe hook from the 36-Swirl series, the Deltana BBN2009 single robe hook from the BBN series, and the Emtek 2266 SELECT knurled tip double hook with rosette from the Select Bath Hardware line. The Emtek 2266 mounts with a rosette, which covers the mounting area differently than a hook attached with the two #6 x 3/4 inch round head wood screws supplied with the 802.

Single-point hooks in the peer set are the Deltana BBN2009 single robe hook from the BBN series, the Emtek 2606 solid brass robe hook, the Emtek 25050 wrought steel robe hook, the Orca Hardware 2753 Cypress robe hook, the Orca Hardware 3654 Swirl robe hook, and the Trimco 3070-1 coat and hat hook. Among these the Trimco 3070-1 is the one described as a coat and hat hook rather than a robe hook, which is the same duty the Rockwood 802 is built for at a 3 inch projection.