Safety Flag WBT Woven Polypropylene Barricade Tape (Non-Pressure Sensitive)

Safety Flag WBT Woven Polypropylene Barricade Tape (Non-Pressure Sensitive)

Safety Flag Barricade Tapes - Webbing (Non-Pressure Sensitive) are heavy-duty, non-conductive barricade tapes made from weatherproof woven polypropylene, engineered for marking hazard areas, cordoning off work zones, and restricting access on jobsites, construction sites, and utility projects. This family is available in 3/4" x 150' and 2" x 150' sizes, with pull tensile strength rated at 100 lbs for the 3/4" tape and 300 lbs for the 2" tape, giving crews a tear-resistant alternative to lightweight printed tape. Choose from Yellow/Black for general-use barricading, Yellow/Magenta for radiation hazard marking, or solid Red for restricted-area warnings, with each tape style offered individually or in packs of 24 for crews that need to keep extra rolls on hand.

Key Features

• Non-conductive, weatherproof woven polypropylene construction stands up to sun, rain, and repeated job site handling
• Webbing-style barricade tape - not pressure sensitive, with no adhesive backing to fail in heat or cold
• Available in 3/4" x 150' and 2" x 150' widths and lengths to match the application
• Pull tensile strength of 100 lbs for the 3/4" tape and 300 lbs for the 2" tape for dependable hold across a barricaded perimeter
• Yellow/Black colorway for general-use barricading and job site perimeter marking
• Yellow/Magenta colorway specifically designated for radiation hazard marking
• Also available in solid Red for restricted-area and danger-zone warnings
• All tapes measure 150 feet in length, available individually or in packs of 24

Technical Specifications

• Product Type: Safety Tape

Typical Applications

• Road and Highway Work Zones
• Construction Site Perimeters
• Utility and Surveying Crews
• Hazardous Area and Radiation Hazard Marking
• Parking Lot and Event Traffic Control
• Facility and Warehouse Hazard Marking

Why Safety Flag?

Safety Flag builds its webbing barricade tapes from weatherproof, non-conductive woven polypropylene rated to withstand real job site pulling and tension, with 100 lbs and 300 lbs tensile strength ratings for the 3/4" and 2" tapes respectively. Because these tapes are webbing rather than pressure-sensitive film, they resist the curling, tearing, and adhesive failure that can undermine lightweight printed tape in wet or windy conditions. The Yellow/Black, Yellow/Magenta, and Red colorways give crews a clear, durable way to mark general hazards, radiation zones, and restricted areas, all available in a length of 150 feet per roll, individually or in packs of 24.