You may also like
Sammys Threaded Rod Anchor for Steel Substrates, Box of 25
Model: SAM-STEEL
Sammys Threaded Rod Anchor for Steel Substrates, Box of 25Sammys Threaded Rod Anchor for Steel Substrates, Box of 25 provides a fast, reliable way to anchor threaded rod directly to steel substrates...
Sammys
Starting at
$38.82
Sammys Threaded Rod Anchor for Wood, Box of 25
The Sammys Threaded Rod Anchor for Wood gives electrical, mechanical, and general construction contractors a fast, dependable way to anchor threaded rod directly into wood framing and other structural wood members. Designed specifically as a wood-rated threaded rod anchor, this Sammys fastener eliminates the need for separate hangers or brackets when creating a secure threaded rod connection point in wood construction. Sold in a box of 25, it is packaged for crews that need enough anchors on hand to complete multi-point support and suspension runs without stopping mid-job. Each anchor is assembled in the US from US and/or foreign components, giving installers a consistently produced fastening solution for wood-frame jobs of any size.
Key Features
- Wood-Rated Design: Engineered specifically as a threaded rod anchor for wood, allowing direct installation into wood framing, joists, and other structural wood members.
- Box of 25: Packaged 25 anchors per box so crews can stock enough fasteners for an entire multi-point hanger or support run without reordering mid-job.
- Threaded Rod Compatible: Built to accept standard threaded rod, simplifying the creation of overhead support and suspension points in wood-frame construction.
- US Assembly: Assembled in the US from US and/or foreign components for a consistently manufactured anchoring product.
- Direct-to-Wood Installation: Installs straight into wood members, helping streamline anchor point setup compared with separate bracket-and-fastener assemblies.
- Job-Ready Packaging: The box-of-25 count keeps anchors organized and easy to track across multi-anchor installations.
Technical Specifications
- Country of Origin: Assembled in the US from US and/or foreign components
- Box Quantity: 25
Typical Applications
- Anchoring Threaded Rod into Wood Framing and Joists
- Overhead Support and Suspension Systems in Wood-Frame Buildings
- Hanging Conduit, Pipe, and Cable Tray from Wood Structural Members
- Commercial and Residential Wood-Frame Construction
- Renovation Projects Requiring New Wood-Anchored Support Points
- New Construction Hanger and Suspension Installations
Why Sammys?
Sammys threaded rod anchors give contractors a straightforward way to create secure anchor points in wood framing without relying on separate brackets or hardware assemblies. Each Sammys Threaded Rod Anchor for Wood is assembled in the US from US and/or foreign components and packaged 25 to a box, helping crews keep support, suspension, and hanger installations moving efficiently from one wood-frame job to the next.
Specifications by Size
| Size | Part # | Mount Style | Rod Size | Substrate Fastener Size | Drive | Box Qty | UPC |
|---|---|---|---|---|---|---|---|
| Vertical, 1/4" Rod, 2" Screw (8003957) | — | — | — | — | — | — | — |
| Vertical, 3/8"-16 Rod, 1/4" x 1" Screw (8007957) | — | — | — | — | — | — | — |
| Vertical, 1/4"-20 Rod, 1/4" x 1" Screw (8002957) | 8002957 | Vertical | 1/4"-20 | 1/4" x 1" | Sammys® #14 (Black) Nut Driver (8113910) | 25 | — |
| Vertical, 3/8"-16 Rod, 1/4" x 1" Screw (8020957) | 8020957 | Vertical | 3/8"-16 | 1/4" x 1" | Sammys® #14 (Black) Nut Driver (8113910) | 25 | — |
| Vertical, 1/2"-13 Rod, 1/4" x 2" Screw (8013925) | 8013925 | Vertical | 1/2"-13 | 1/4" x 2" | Sammys® #14 SW (Red) Nut Driver (8114910) | 25 | — |
| Vertical, 3/8"-16 Rod, 1/4" x 2" Screw (8008957) | 8008957 | Vertical | 3/8"-16 | 1/4" x 2" | Sammys® #14 (Black) Nut Driver (8113910) | 25 | — |
| Swivel, 3/8"-16 Rod, 1/4" x 2" Screw (8139957) | 8139957 | Swivel | 3/8"-16 | 1/4" x 2" | Sammys® #14 (Black) Nut Driver (8113910) | 25 | — |
| Horizontal, 3/8"-16 Rod, 1/4" x 2" Screw (8021957) | 8021957 | Vertical | 3/8"-16 | 1/4" x 2" | Sammys® #14 SW (Red) Nut Driver (8114910) | 25 | — |
| Vertical, 1/2"-13 Rod, 1/4" x 3" Screw (8015925) | 8015925 | Vertical | 1/2"-13 | 1/4" x 3" | Sammys® #14 SW (Red) Nut Driver (8114910) | 25 | — |
| Vertical, 3/8"-16 Rod, 1/4" x 3" Screw (8010957) | — | — | — | — | — | — | — |
| Vertical, 3/8"-16 Rod, 1/4" x 3" Screw (8023925) | 8023925 | Vertical | 3/8"-16 | 1/4" x 3" | Sammys® #14 SW (Red) Nut Driver (8114910) | 25 | — |
| Vertical, 3/8"-16 Rod, 3/8" x 2-1/2" Screw (8009925) | — | — | — | — | — | — | — |
| Vertical, 3/8"-16 Rod, 3/8" x 2-1/2" Screw (8022925) | 8022925 | Vertical | 3/8"-16 | 3/8" x 2-1/2" | Sammys® #14 SW (Red) Nut Driver (8114910) | 25 | — |
Manufacturer Resources
Product Specs
- Product Brand:
- Sammys
- Product Type:
- Threaded Rod Anchor
- Box Quantity:
- 25
- Department:
- Fasteners
- Product Group:
- Threaded Rod Anchors
- Product Subgroup:
- Threaded Rod Anchors
- Base Material:
- Wood
Sammys SYGST10 – Frequently Asked Questions
1) What rod sizes can I get on the Sammys threaded rod anchor for wood?
Three rod threads are offered across the Sammys wood anchors: 1/4"-20, 3/8"-16, and 1/2"-13. Most of the options are 3/8"-16, which is the common hanger rod size for conduit, pipe, and cable tray. Match the anchor's rod thread to the rod you are hanging, since the rod threads directly into the anchor body.
2) What is the difference between the vertical, horizontal, and swivel Sammys wood anchors?
Mount style is about the direction of the load path, and all three are sold in the Sammys wood line. Vertical anchors are the standard overhead pick, driven up into a joist or beam so the rod hangs straight down. The horizontal version (3/8"-16 rod, 1/4" x 2" screw, 8021957) is for driving into the side of a wood member so the rod runs out from a vertical face. The swivel version (3/8"-16 rod, 1/4" x 2" screw, 8139957) lets the rod angle off the anchor, which is what you want for sloped roof decks or seismic and sway bracing where the rod is not plumb.
3) Which screw length should I pick for anchoring rod into 2x wood framing?
Screw lengths run 1", 2", 2-1/2", and 3". A 1" screw (for example 8002957 or 8020957) only has enough embedment for thin or doubled sheet stock and light loads. For nominal 2x framing and solid joists, the 2" and 3" screws are the practical choices, and the 3/8" x 2-1/2" heavy screw option (8022925) gives the largest shank diameter in the group for the heaviest pull-out demand. Longer screw into solid wood means more thread engagement and more holding capacity.
4) Do Sammys wood anchors need a special driver, and is it included?
You drive them with a Sammys nut driver, and the driver is a separate tool, not packed in the box of 25. The 1/4" screw options call for either the Sammys #14 (Black) nut driver, part 8113910, or the #14 SW (Red) nut driver, part 8114910, depending on the anchor. Check which of the two your anchor uses before you head to the ceiling; one driver covers a whole run of the same anchor.
5) Can I use a Sammys wood anchor in concrete or steel decking?
No. These are wood-base anchors, with wood as the rated base material, and the screw is a wood screw point meant for joists, beams, blocking, and other structural wood members. Driving one into concrete, masonry, or steel will not develop any reliable hold. For those substrates you need the concrete or steel versions of the Sammys rod anchor instead, which use a different screw point entirely.
6) I need to hang 1/2 inch threaded rod from wood joists. Which Sammys anchor fits?
Two 1/2"-13 options cover that: one with a 1/4" x 2" screw (8013925) and one with a 1/4" x 3" screw (8015925). Both are vertical mount for overhead work. Pick the 3" screw where the joist is solid and you want maximum thread engagement; the 2" is the choice in shallower or doubled members. Both drive with the Sammys #14 SW (Red) nut driver, 8114910.
7) Do I still need hangers or brackets with a Sammys rod anchor?
No separate bracket is required at the structure. The Sammys wood anchor is a one-piece fastener: the screw end drives into the wood and the threaded end receives the rod, so it becomes the anchor point by itself instead of a bracket plus a fastener plus a nut. You still supply the threaded rod and whatever clamp or clevis hanger carries the pipe or conduit at the bottom of the rod.
8) How many Sammys wood rod anchors come in a box?
25 anchors per box, every option. That is usually enough for a full multi-point hanger or suspension run, so a crew hanging conduit or pipe off wood framing can set a whole line without breaking into a second box. Count your drop points and order boxes accordingly.
9) Are Sammys threaded rod anchors made in the USA?
They are assembled in the US from US and/or foreign components. For agencies and institutional buyers tracking domestic content, that is the origin statement on the product, so treat it as US assembly rather than wholly US-made material.
10) What trades actually use these wood rod anchors?
Electrical, mechanical, and general construction crews. Typical work is hanging conduit, pipe, and cable tray off wood joists and beams, setting overhead support and suspension points in wood-frame buildings, and adding new anchor points during renovation where there was no hanger before. On the property management and MRO side they are the straightforward way to add a support point in a wood-framed ceiling without fabricating a bracket.
How fast can I get the Sammys SYGST10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sammys SYGST10 come with a warranty?
Absolutely. The Sammys SYGST10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sammys SYGST10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sammys SYGST10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.