Sargent KP10X Storeroom Functi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,769.00
$1,492.20
Sargent KP10X Storeroom Function Keypad Lockset with ANSI Grade 1 Certification

Sargent KP10X Storeroom Function Keypad Lockset with ANSI Grade 1 Certification

(No reviews yet) Write a Review

Model: 2870-KP10G77-LB-26D
$1,769.00
$1,492.20
Selected Finish is
Selected Lever is
Selected Roses is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,769.00
$1,492.20
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Sargent KP-10X ANSI Grade 1 Storeroom Function Electronic Keypad Lockset with Cylinder Override

Standalone Electronic Access Control with Integrated Cylinder Override

The Sargent KP-10X Line keypad lockset delivers professional-grade standalone access control with ANSI/BHMA Grade 1 certification for demanding commercial applications. This battery-powered, motor-driven lockset features a microprocessor-based controller with non-volatile memory, providing 40,000 operations per battery set with EcoFlex™ technology for extended battery life. The integrated cylinder override allows seamless incorporation into existing master keyed systems, while the 1/2" latchbolt throw ensures secure latching performance.

Professional Features & Benefits

  • ANSI/BHMA Grade 1 Certification: A156.2 Grade 1 rated bored lock construction provides heavy-duty performance for high-traffic commercial applications.
  • Extended Battery Life: EcoFlex™ technology delivers typical 40,000 operations per battery set for reduced maintenance requirements and reliable long-term operation.
  • Non-Volatile Memory Protection: Microprocessor-based controller retains programming and user codes even during power loss for uninterrupted access control.
  • Integrated Cylinder Override: Allows easy integration into new or existing master keyed systems for flexible access management and emergency override capability.
  • UV-Stable Keypad Construction: Textured material keypad resists ultraviolet degradation for long-term outdoor durability and consistent operation.
  • Visual Status Indicators: LED indicators provide clear operational feedback with green for unlocked, yellow for programming mode, and combination signals for comprehensive status monitoring.
  • Storeroom Function (77): Lever outside rigid except when valid credential presented, lever inside always retracts latch with guardbolt deadlocking feature for enhanced security.
  • Manufacturer Warranty: 2 Year Limited warranty provides added confidence and protection for commercial installations.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Installation & Operation

  1. Verify electrical requirements and confirm battery specifications before proceeding with installation.
  2. Disconnect any existing power sources and follow all applicable electrical codes and safety procedures.
  3. Mount the lockset in the specified door preparation ensuring adequate clearance for keypad access and future battery service requirements.
  4. Configure operational settings including user codes and storeroom function parameters per application requirements using keypad programming interface.
  5. Install batteries and test all functions including normal operation, LED indicators, and cylinder override functionality.
  6. Program user codes and verify keypad response with green, yellow, and combination LED status indicators for proper operation confirmation.
  7. Complete final inspection and document programming settings. Refer to manufacturer documentation for complete programming instructions, battery replacement procedures, and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Sargent Quality?

Sargent KP-10X Line keypad locksets deliver professional-grade reliability with ANSI/BHMA Grade 1 certified construction and microprocessor-based control technology rated for 40,000 operations per battery set. The 2 Year Limited warranty and EcoFlex™ battery technology provide long-term value for demanding commercial applications. Engineered for standalone access control where dependable electronic performance and master key system integration are essential.

Product Specs

Series:
KP-10X Series
Grade:
Grade 1
Product Group:
Mechanical Locks
Product Subgroup:
Bored Locksets
Subcategory:
Bored Locksets
Keyed:
Yes
Commercial/Residential:
Commercial
Lock Type:
Cylindrical
Lock Function:
Storeroom
Product Type:
Mortise Locks
Product Attribute:
Electronic Locks
Electronic:
Yes
Product Function:
Storeroom
Door Hand Direction:
Non-Handed
Product Category:
Electronic Locks
Department:
Door Hardware

Sargent 2870-KP10G77-LB-26D – Frequently Asked Questions

1) Will the Sargent KP-10X keypad lockset work on a door prepped for a standard cylindrical lock?
Yes. The KP-10X is a bored cylindrical lockset, not a mortise lock, so it goes into a standard 161 cylindrical door prep rather than a mortise pocket. That makes it a straightforward swap on an opening that already carries a cylindrical lever lock. If your door has a mortise pocket instead, this is the wrong lock body type and you want a mortise electronic lock.
2) Does the Sargent KP-10X have to be ordered handed?
No handing to specify. The KP-10X is non-handed, so the same lock covers left and right hand openings and you do not need to know the swing before you order. That also means one part number can be stocked for a whole building of mixed swings.
3) How does a storeroom function keypad lock behave when someone is inside the room?
Storeroom function (10G77) keeps the outside lever rigid at all times unless a valid code or the key override is used. The inside lever always retracts the latch, so egress is never blocked, and a guardbolt deadlocks the latch against carding. The door is locked the moment it closes, which is why storeroom is the function used for supply rooms, IT closets and mechanical spaces that should never be left unlocked by accident.
4) Can I put a Sargent KP-10X on doors that are part of my existing master key system?
Yes, that is the point of the cylinder override. The KP-10X takes a keyed cylinder alongside the keypad, so it drops into a new or existing master keyed system and a master key still opens the door if the batteries die or a code is forgotten. You choose the cylinder type when ordering: a standard cylinder, or the 60 large format interchangeable (FSIC) or 70 small format interchangeable (SFIC) housing, both supplied less core so your existing cores go straight in.
5) Do I need to run power or wire to a Sargent KP-10X?
No wiring. The KP-10X is a standalone battery powered lockset with a motor driven latch retraction, so there is no transformer, no power transfer hinge and no door loop to install. EcoFlex battery technology gives a typical 40,000 operations per battery set, and the microprocessor uses non-volatile memory, so user codes and programming survive a dead battery change. If you need a lock that reports back to a head end, this is the wrong choice and you want a networked or wired lock instead.
6) What is the closest mechanical equivalent to a Sargent KP-10X storeroom lockset for an opening that does not need a keypad?
For a keyed-only storeroom opening, the Cal-Royal NM8080 is a Grade 1 storeroom lockset with an interchangeable core option, and the Accentra 8805FL is a Grade 1 storeroom lock in the 8800 Series with an Arcadia lever. Both hold the same Grade 1 rating and the same storeroom function as the Sargent KP-10X, so the outside lever stays rigid until a valid credential is used. The difference is the credential: the KP-10X adds keypad codes with cylinder override, while the NM8080 and 8805FL are key-only. If the opening only needs a master key, the mechanical pair covers it; if you need code-based entry logged to individual users, the keypad version is the one.
7) Which keypad lock should be used instead of a Sargent KP-10X on a classroom door that needs classroom security function?
The KP-10X is a storeroom function lock, where the outside lever is rigid until a valid code or key is used and the inside lever always retracts the latch. For classroom function, the Alarm Lock DL3500CR is a Grade 1 electronic mortise lock with classroom function and 300 user codes, and the Alarm Lock DL2700CR is a Grade 1 Trilogy T2 electronic mortise lock with classroom function and a weatherproof design; both fit doors 1-5/8 inch to 1-7/8 inch thick. TownSteel also offers the FME-2000 Series, a Grade 1 heavy duty classroom mortise lockset with RFID, for 1-3/4 inch doors. Pick by credential type: keypad codes on the Alarm Lock units, RFID cards on the TownSteel.
8) The door has a mortise pocket, not a cylindrical bore. What keypad lock replaces a Sargent KP-10X there?
The KP-10X is a bored cylindrical lock and needs a standard cylindrical prep. For a mortise pocket with a keypad, the BEST 45HZ EZ Series is an electronic keypad mortise lock with key override, and the Dormakaba E-Plex 2066 Series is an electronic pushbutton keyless mortise lock for wide stile doors. The Dormakaba E5086 is a Grade 1 E-Plex pushbutton and card mortise lock in a back-to-back entry/egress configuration for openings that need credential control on both sides. All three keep code-based standalone access without pulling power to the door, the same way the KP-10X does.
9) Sargent KP-10X or a wired electric lock like the BEST 45HW or Schlage L9092EU?
The KP-10X runs on batteries with EcoFlex technology rated at a typical 40,000 operations per battery set and holds its programming in non-volatile memory, so it needs no wiring to the door. The BEST 45HW is a wired electromechanical mortise lock operating at 12V or 24V, and the Schlage 03A L9092EU is a heavy duty electric lock/unlock outside lever mortise lock, keyed outside, with request-to-exit at 12/24VDC. The Command Access ML190 Series is a motorized mortise lock with field selectable EL/EU operation on 24VDC in storeroom function. Choose the wired units when the opening must be released or monitored from an access control panel; choose the KP-10X when the door should manage its own codes with no transfer hinge or power supply run.
10) Is the Schlage CO-100 a substitute for a Sargent KP-10X?
They are close on paper and different where it counts. The Schlage CO-100 keypad reader shown is a standalone electronic mortise lock in privacy function, Grade 1 heavy duty, for 1-3/4 inch doors. The Sargent KP-10X is Grade 1 in storeroom function, where the outside lever stays rigid until a valid credential is used and the inside lever always retracts the latch. A privacy lock is meant for a restroom or a room secured from the inside, not for a stockroom or IT closet that must stay locked to the corridor at all times. Match the function before the brand.
11) Is the Sargent KP-10X keypad lock rated for high traffic commercial doors?
It carries ANSI/BHMA A156.2 Grade 1 bored lock certification, which is the heaviest commercial duty rating for a cylindrical lock and the level normally specified for schools, hospitals and office corridors. Grade 1 is what a spec on a drawing will call for on any high use opening, so it meets that line without a substitution request.
12) Can I get the Sargent KP-10X in a finish that matches the other levers in my building?
Fourteen finishes are offered: bright brass 03, satin brass 04, bright bronze 09, satin bronze 10, dark oxidized satin bronze in 10B oil rubbed, 10BE and 10BL clear coated, bright nickel 14, satin nickel 15, dark statuary bronze 20D, bright chrome 26, satin chrome 26D, plus black suede powder coat and white suede powder coat. Satin chrome 26D is the usual match for existing commercial lever hardware. Lever style is B, L or P with a G or L rose, so the trim can be matched to the mechanical locks already on the other doors.
13) Should I use a standalone keypad lock or a mortise electronic lock for a storeroom door?
A bored keypad lock like the KP-10X installs in the standard cylindrical prep and needs no wiring, which makes it the quicker route on existing doors and on retrofits where you do not want to cut a mortise pocket. A mortise electronic lock puts the whole mechanism in a pocket in the door edge and is what you use where the door is already mortise prepped or where you need a deadbolt in the same body. If your storeroom door has a mortise pocket, look at the BEST 45HZ EZ Series electronic keypad mortise lock with key override, which is the mortise equivalent with the same keypad plus key approach.
14) What is a good alternative to the Sargent KP-10X if I need card or mobile credentials instead of a keypad code?
The KP-10X is code plus key only, with no reader. If you need credentials beyond a PIN, the Dormakaba E-Plex E5086 takes both pushbutton and card and is Grade 1, the Dormakaba LX-I-M002 Saffire is an RFID lockset with Bluetooth mobile access at BHMA Grade 2, and the Schlage Electronics LEMD-GRW ENGAGE is a Grade 1 wireless lock with a 125 kHz proximity reader. All three are mortise bodies, so check your door prep before switching from a bored lock.
15) I need a Grade 1 storeroom lock but not an electronic one. What else does ZenSupply carry?
For a mechanical storeroom function at Grade 1, the Cal-Royal NM8080 is a heavy duty mortise storeroom lockset for 1-3/4 inch doors with an interchangeable core option, and the Accentra 8805FL is a Grade 1 storeroom mortise lock with the Arcadia lever. Both are mortise bodies, so they need a mortise pocket rather than the bored prep the KP-10X uses. You give up keypad codes and get a lock with no batteries to service.
16) Can I order a batch of Sargent KP-10X locks keyed alike for one building?
Yes. Keying is chosen on the order: keyed different, keyed alike, or to a specific key code you supply. If you are running interchangeable cores through your own keying system, choose the 60 FSIC or 70 SFIC cylinder and select none for keying, and the lock arrives less core for your locksmith to pin and load on site.
17) What lock should be used instead of a Sargent KP-10X when the codes need to be managed from a central system rather than at the door?
The KP-10X is a standalone lock, programmed through its own keypad at the door. When credentials must be pushed and revoked centrally, the Alarm Lock DL1300NW is a Trilogy Networx wireless electronic mortise lock with keypad for Adams Rite deadlatches, and the Schlage Electronics LEMD-GRW is a Grade 1 ENGAGE Series wireless mortise lock with a 125kHz proximity reader and mobile-enabled deadbolt with LED, carrying a 3 hour fire rating with Greenwich trim, right hand. The Dormakaba LX-I-M002 Saffire is an electronic RFID mortise lockset with BLE mobile access at BHMA Grade 2. Standalone suits a handful of doors; networked or mobile-enabled suits a portfolio where turnover is constant.
18) Which storeroom lock works on an exterior door where the Sargent KP-10X keypad has to take weather?
The KP-10X keypad is built from a textured, UV-stable material that resists ultraviolet degradation, which is what carries it on an exterior opening. Among comparable electronic units, the Alarm Lock DL2700CR Trilogy T2 is specified with a weatherproof design, though it is a Grade 1 classroom function mortise lock for doors 1-5/8 inch to 1-7/8 inch thick, not a storeroom lock. If the exterior door must remain locked to the outside at all times with the inside always free, the KP-10X storeroom function is the behavior to match; if the door needs the lever lockable from inside the room, the DL2700CR classroom function is.
19) Does a Sargent KP-10X keep the existing master key system, or is a mechanical storeroom lock the safer choice for a keyed facility?
The KP-10X has an integrated cylinder override built for incorporation into new or existing master keyed systems, and it is offered with a 60 Sargent large format interchangeable core prep, a 70 small format interchangeable core prep, or a standard cylinder, so it can be specified to match the cores already in the building. Among mechanical peers, the Cal-Royal NM8080 is a Grade 1 storeroom lockset with an interchangeable core option and the Corbin Russwin ML2003 is a Grade 1 mortise classroom lockset for 1-3/4 inch doors. A facility standardizing on one keyway can carry the KP-10X on the doors that need codes and a keyed lockset elsewhere without splitting the key system.
20) What is the difference between a Sargent KP-10X and an electronic deadbolt like the Alarm Lock DL4500?
The Alarm Lock DL4500 Series is a Grade 1 electronic mortise deadbolt with 2,000 user codes and a privacy keypad, for doors 1-5/8 inch to 1-7/8 inch thick. It secures the opening with a deadbolt and no latching lever set. The Sargent KP-10X is a Grade 1 keyed storeroom lockset with a lever and a 1/2 inch latchbolt throw with a guardbolt deadlocking feature, so the door latches every time it closes and the inside lever always allows exit. On an egress path, the always-free inside lever of the storeroom function is usually what the code official is looking for; a deadbolt-only unit is a supplemental or non-egress application.
21) Can a Codelocks CL2255 be used where a Sargent KP-10X is specified?
The Codelocks CL2255 is an electronic tubular mortise latch in a brushed steel finish, rated medium duty in the CL2000 Series. The Sargent KP-10X is certified to ANSI/BHMA A156.2 Grade 1 for heavy-duty commercial use and is specified as a commercial product. If the spec on the drawing calls for Grade 1, the medium duty unit will not satisfy it. The CL2255 suits lighter-traffic interior openings; a high-traffic corridor, stockroom, or institutional door is where the Grade 1 rating is being asked for.
22) Which locks look like alternatives to a Sargent KP-10X but will not secure the opening?
Several mortise locksets in the same size class have no locking function at all. The Falcon MA101 is a Grade 1 heavy-duty mortise passage lock, the Schlage PM010 is a Grade 1 non-keyed passage latch mortise lock, and the Hager 3810S is a 3800 Series Grade 1 passage mortise lock with rose and a 2-3/4 inch backset. The Schlage L0170 is half dummy trim, a Grade 1 non-keyed dummy lever with no latch. The Sargent KP-10X is a keyed storeroom lockset, so the outside lever is rigid until a valid code or key is used. Passage and dummy units are for doors that only need to be pushed open or pulled.
23) Is there a Sargent KP-10X alternative for a behavioral health or ligature-resistant opening?
The KP-10X is a lever-operated storeroom lockset and carries a projecting lever trim. Where trim must not present a ligature point, the TownSteel MRX-L-01 is a Grade 1 heavy duty stainless steel anti-ligature lever mortise lockset in passage function for 1-3/4 inch doors, the TownSteel MRX-A-01 is a satin stainless steel ligature-resistant arch trim mortise lockset in passage function, and the Marks USA 5PDN is a Grade 1 hospital passage mortise push/pull paddleset that is ligature resistant and ADA compliant in satin stainless steel. All three are passage function, so they do not lock; use them on the openings that only need to swing and keep a keyed or keypad storeroom lock where the room must stay secured.
24) What Grade 1 lockset gives office or entrance function where a Sargent KP-10X storeroom lock is too restrictive?
Storeroom function on the KP-10X keeps the outside lever rigid at all times, so the door cannot be left unlocked during business hours without a code being entered each time. For an opening that needs to be set unlocked and then relocked, the Cal-Royal NM8050 is a Grade 1 heavy duty office/entrance mortise lockset with an auxiliary deadlatch for 1-3/4 inch doors, and the Hager 3850E is a 3800 Series Grade 1 office mortise lock with lever and escutcheon, non-keyed, with a 2-3/4 inch backset for doors 1-3/4 to 2-1/2 inches thick. Office function suits a suite door on a schedule; storeroom suits a room that must never be left open.
25) How does a Sargent KP-10X compare to a Schlage LE Series mobile-enabled lock for a multi-tenant building?
The Schlage Electronics LEBMB-ADD is a mobile-enabled mortise lock with push button and LED, offered in privacy, office and apartment functions, Grade 2, with a 3 hour fire rating for 1-3/4 inch doors. The Sargent KP-10X is Grade 1 in storeroom function with keypad codes and a cylinder override that ties into an existing master key system. For unit doors where residents carry phones and turnover is frequent, the mobile-enabled unit fits the workflow; for the mechanical, electrical and storage rooms in the same building, where the door must stay locked and the maintenance master key must still work, the Grade 1 storeroom keypad is the match.
26) Will a Baldwin 6310 mortise lock work in place of a Sargent KP-10X storeroom lockset?
The Baldwin 6310 is an entry/storeroom mortise lock body, knob by knob, with a 2-1/2 inch backset for doors 1-3/8 inch and over, and the 6310190RRLS is the right hand reverse lever by lever version of the same 2-1/2 inch backset lock. Those are mortise lock bodies with a 2-1/2 inch backset, while the Sargent KP-10X is a non-handed cylindrical bored lock. The prep is not interchangeable: the Baldwin needs a mortise pocket cut for a 2-1/2 inch backset, and the KP-10X needs a standard bored prep and can be installed without specifying hand.
27) What happens to the programmed codes on a Sargent KP-10X when the batteries die?
Codes and programming are held in non-volatile memory, so they survive a total loss of power and are still there when fresh batteries go in. Until then the keyed cylinder override opens the door, which is why the key side matters even on a keypad lock. LED feedback covers day to day use: green for unlocked, yellow for programming mode, and combined signals for other states.
28) Will a Sargent KP-10X keypad hold up on an exterior door?
The keypad uses a UV stable textured material that resists ultraviolet degradation, so it is built for outdoor exposure rather than interior corridors only. Combined with the Grade 1 bored lock body, it suits perimeter storeroom, yard and service entrance doors on commercial buildings.
29) What is the simplest way to get keyless entry on a door without a full Sargent KP-10X keypad lockset?
The Dormakaba PowerPlex P2066 Series is a mortise lock in the PowerPlex 2000 Series, and the Dormakaba E-Plex 2066 is an electronic pushbutton keyless mortise lock for wide stile doors. Both give code entry at the door without card readers or wiring. The Sargent KP-10X adds ANSI/BHMA Grade 1 certification, storeroom function, and an integrated cylinder override that folds the door into an existing master key system, with FSIC, SFIC or standard cylinder preps available. If a mechanical key must still open the door for maintenance or emergency access, the override is the feature to hold onto.
30) Do the Sargent KP-10X finishes cross to other Grade 1 locksets on the same doors?
The Sargent KP-10X comes in 26D satin chromium plated over nickel, 26 bright chromium plated over nickel, 10B dark oxidized satin bronze oil rubbed, 15 satin nickel plated, 04 satin brass, and black or white suede powder coat among others, with G rose or L rose and B, L or P levers. Peers carry their own finish designations: the Marks USA 5PDN and the TownSteel MRX-A-01 are satin stainless steel, and the Codelocks CL2255 is brushed steel. Satin stainless and brushed steel read close to 26D but are not the same designation, so on a corridor where every lever must match, specify the same finish code across the openings rather than assuming the brands align.
How fast can I get the Sargent 2870-KP10G77-LB-26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sargent 2870-KP10G77-LB-26D come with a warranty?
Absolutely. The Sargent 2870-KP10G77-LB-26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sargent 2870-KP10G77-LB-26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Sargent 2870-KP10G77-LB-26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!