SATCO Lighting 64-152 Tape Channel, 16ft, Angled

It's the channel only. The Satco 64-152 is a 16 ft angled tape channel, an extrusion that holds and protects LED tape light. The tape itself, the driver, and any connectors are separate items you order alongside it.

Angled means the extrusion is cut to sit in a corner and aim the tape out at an angle rather than straight down. It's the profile electricians and remodelers reach for on under-cabinet runs, cove and toe-kick lighting, or a stair nosing, where you want the light thrown out across a surface instead of glaring straight back at the room. If you need a flat surface-mount or a recessed profile, that's a different channel style.

The 64-152 is a 16 ft run of angled tape channel. Aluminum tape extrusion is routinely cut to length on site with a miter saw or hacksaw, so a 16 ft piece covers several shorter cabinet or cove sections from one part number. Cut the tape light itself only at the manufacturer's marked cut points.

Silver is the one finish offered on the 64-152. It's a single configuration, so there's no color or length choice to specify when ordering, just the 16 ft angled channel in silver.

Order by total linear footage, not by cabinet. Each 64-152 gives you 16 ft of angled channel, so add up every run you're lighting and divide. Buying multiples of the same number keeps the silver finish consistent across every opening on the job, which matters when a property manager is looking down a row of cabinets or a continuous cove.