You may also like
SATCO Lighting S11311 10W A19 LED, 4000K, Medium Base, 120V, Left Hand Thread
10 Watt A19 LED - 4000K - Medium base - 120 Volt - Left Hand Thread
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.083A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Med Left Hand Thread LHT
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 1050L
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 200
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 10W
- Product Weight:
- 0.13 lb
- Product Material:
- Acrylic
Satco Lighting S11311 – Frequently Asked Questions
1) What incandescent bulb does the Satco S11311 LED replace?
It replaces a 75 watt incandescent while drawing 10 watts, putting out 1050 lumens at 120 volts and 0.083 amps. Light output is 4000K neutral white with 80 CRI, so it reads cooler and crisper than a 2700K incandescent. If you are relamping a whole property, expect a visible color shift unless the existing lamps were already in the 4000K range.
2) Can I use this LED bulb in a fully enclosed ceiling fixture?
Yes. The S11311 is an enclosed rated lamp, so it can go in a closed globe or drum fixture without voiding the rating. It also carries a damp location rating, which covers bathrooms, covered porches and stairwells, but not wet locations with direct water exposure.
3) Is the Satco S11311 dimmable, and can I put it on a three-way lamp?
Dimmable, yes. Three-way, no. It is a single-output lamp, so on a three-way socket it will run at one level only. On a dimmer, use a circuit rated for LED loads; the lamp draws just 0.083 amps, so a dimmer with a high minimum load may flicker or drop out at the low end.
4) Can this bulb be installed base-up in a recessed can or sideways in a wall sconce?
Any orientation works. The burning position is universal, so base-up, base-down or horizontal are all fine. With a 200 degree beam spread and a frosted lens, light is thrown broadly rather than directionally, which suits open shades, sconces and general room lighting more than tight downlight applications.
5) Can I order this lamp in a different color temperature like 2700K or 3000K?
The S11311 is fixed at 4000K and is not a CCT-selectable lamp, so there is no field switch for warmer output. If you need a warmer color on a left hand thread socket, you need a different Satco LHT lamp part number rather than an adjustment to this one.
6) How long will these last before maintenance has to relamp again?
Rated average life is 15,000 hours. On a 12-hour-a-day corridor or common area schedule that works out to roughly three and a half years of service before a planned relamp.
7) Is the Satco S11311 a glass bulb or plastic?
The lamp body and base material are acrylic with a white housing and a frosted lens, not glass. That matters for tenant housing, dorms and hospitality, where a dropped acrylic lamp will not shatter the way glass does.
8) Does this Satco LED qualify for a DesignLights Consortium utility rebate?
No. The S11311 is not DLC approved, so it will not qualify under DLC-based utility rebate programs. It is FCC compliant and noted as lawful for sale in California.
How fast can I get the Satco Lighting S11311 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11311 come with a warranty?
Absolutely. The Satco Lighting S11311 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11311?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11311 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.