SATCO Lighting S11378 8W BT15 LED, Clear, Medium Base, 2700K, 800 Lumens, 120V

It is a dimmable lamp. On a dimmer circuit it needs an LED-compatible (electronic low voltage or LED/CFL rated) dimmer; older magnetic incandescent dimmers can flicker or buzz with an 8 watt load because the wattage sits below their minimum load.

2700K, which is the warm white of a standard incandescent or halogen lamp, so it blends with existing incandescent fixtures in lobbies, corridors and guest rooms. It also carries a CRI of 90 or better, so colors and skin tones render closer to the old filament lamp than a typical 80 CRI LED.

The glass is clear rather than frosted, so the lamp is meant for fixtures where the bulb is visible, open shades, sconces, pendants, chandeliers with uncovered sockets. Clear glass gives a sparkle-type point source and higher glare than a frosted lamp; if the bulb sits at eye level in a corridor and glare is a concern, choose a frosted or milky lamp instead.

Order it as Satco S11378. Satco publishes a PDF spec sheet for the lamp with the full photometric and dimensional data, available at https://media.distributordatasolutions.com/269/xlsx_satco/4d25cff6d71d5e403c41225a0a0dccc81b621fbb.pdf. It ships as a single clear finish, so there are no other options to specify.

Construction is metal, plastic and electronic components rather than an all-glass envelope, and each lamp weighs 0.06 lb. At that weight, case or pallet quantities for a multi-family or hospitality relamp add up to very little freight weight, and the plastic envelope is less breakage-prone in a cart or service van than glass.