You may also like
SATCO Lighting S11403 5.8W, A19 LED, 3000K, Medium Base, 220 degree Beam Angle, 120V
5.8 Watt - A19 LED - 3000K - Medium base - 220 deg. Beam Angle -120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.048A
- Avg Rated Hours:
- 10000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- White
- Lensed:
- Yes
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- Base Material:
- Acrylic
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 5.8W
- Product Material:
- Acrylic
- Product Weight:
- 0.06 lb
Satco Lighting S11403 – Frequently Asked Questions
1) Can the Satco S11403 A19 LED be put on a dimmer switch?
No. The S11403 is a non-dimmable lamp. Put it on a dimmer and you can expect flicker, buzz, or no dimming range at all, and it will not drop low. For dimmed areas, specify a lamp listed as dimmable. It also is not a three-way bulb, so it won't step through levels in a 3-way socket.
2) Is this A19 LED bulb OK in a fully enclosed fixture or a closed ceiling globe?
Yes. The S11403 is an enclosed rated lamp, so it can go in a closed globe, a jelly jar, or a sealed dome fixture without voiding its rating, which is where a lot of standard LEDs fail early from trapped heat. It is also rated for damp locations, which covers a covered porch, a bathroom, or a laundry room. Not for wet locations with direct water exposure.
3) What incandescent wattage does the Satco S11403 replace, and how bright is it?
It replaces a 40W incandescent, drawing 5.8 watts and putting out 450 lumens at 3000K. 3000K is a warm white, a touch cleaner than the yellow of an old 40W bulb but not the blue-white of a 4000K or 5000K lamp. CRI is 80, which is normal for general-purpose residential and corridor lighting.
4) Can I ship this bulb to a job in California?
No. The S11403 is flagged non-compliant for California, so it should not be specified for California projects. Pick a California-compliant A19 LED for those sites.
5) Will this bulb light the whole room or just throw light downward?
The beam spread is 220 degrees, so light goes out and back past the bulb body rather than down in a cone. That suits table lamps, wall sconces, and open ceiling fixtures where you want general room fill. For aimed light on a work surface or artwork you want a directional PAR or BR lamp instead. The lamp is lensed with a white diffuser, so the LEDs are not visible as hot spots.
6) Can the S11403 be installed base-up in a recessed can or pointed sideways in a sconce?
Burning position is universal, so base-up, base-down, or horizontal are all acceptable. That matters for ceiling cans and wall sconces where a position-restricted lamp would shorten life.
7) How long will these A19 LEDs last if I standardize a building on them?
Rated average life is 10,000 hours. At roughly 12 hours a day in a corridor or stairwell that is a bit over two years between relamps. Each lamp draws 0.048 amps, so a 15-amp branch circuit is nowhere near a loading concern even with dozens of fixtures on it.
8) Does the S11403 qualify for a DLC utility rebate?
No, it is not DLC listed, so it will not qualify for rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference. If a utility incentive is driving the spec, choose a DLC-listed lamp.
9) Can I change the color temperature on this bulb to match other fixtures?
No. The S11403 is fixed at 3000K with no CCT selector switch. If the rest of the building is on 2700K or 4000K, this lamp will read visibly different in the same room, so order the matching temperature instead of mixing.
10) Is the Satco S11403 a glass bulb or plastic?
The lamp body is acrylic rather than glass, in white. For multifamily units, rentals, and dorm rooms that is an advantage: it will not shatter into shards if a tenant drops it during a relamp. Net weight is 0.06 lb.
How fast can I get the Satco Lighting S11403 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11403 come with a warranty?
Absolutely. The Satco Lighting S11403 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11403?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11403 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.