You may also like
SATCO Lighting S11432 8.5W, A19 LED Dimmable Agriculture Bulb, 2700K, 120V
8.5 Watt - A19 LED Dimmable Agriculture Bulb - 2700K - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.071A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lumens:
- 1000L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 16 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W-75W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 140
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8.5W
Satco Lighting S11432 – Frequently Asked Questions
1) What incandescent wattage does this 8.5W Satco A19 LED replace?
It replaces a 60W to 75W incandescent, putting out 1000 lumens at 8.5 watts. Color is 2700K warm white with 80 CRI, so it reads like the old soft white bulbs it is swapping out.
2) Can I use this Satco agriculture bulb in an enclosed fixture or outdoors?
Both are covered. The S11432 is an enclosed rated lamp, so sealed jelly jars and closed globes are fine, and it carries a wet location rating for indoor or outdoor use. Burning position is universal, so base up, base down, or horizontal all work.
3) Can I sell or install the Satco S11432 in California?
No. This lamp is flagged non-compliant for California, so it is not the right pick for projects under California's lighting regulations. For those jobs choose a Satco A19 LED that carries a California compliant designation.
4) Is the Satco S11432 dimmable, and does it work as a 3-way bulb?
Dimmable yes, 3-way no. It is a single-output lamp, so it will not step through low/medium/high in a 3-way socket, and it is not a CCT selectable bulb either, the color is fixed at 2700K.
5) How wide is the light spread on this A19 LED, and how long does it last?
Beam spread is 140 degrees, wide enough to fill a room or a barn bay from an open socket rather than throwing a spot. Average rated life is 25,000 hours, which matters when the fixture is on a high ceiling or in a poultry or grow space where relamping is a hassle.
6) Is this Satco bulb DLC listed for a utility rebate?
No, the S11432 is not DLC approved, so it will not qualify under DLC-based utility rebate programs. It is FCC compliant for electromagnetic interference.
7) Is the lens glass or plastic, and how does that hold up in an ag or utility space?
The lens is frosted polystyrene plastic, not glass, and the base is aluminum and plastic. Plastic means no glass shards if a bulb takes a knock in a barn, stairwell, or utility room, which is why it suits agricultural and rough-service locations.
8) How many of these 8.5W bulbs can I put on a 15 amp circuit?
Each lamp draws 0.071A at 120V, so the load per bulb is minimal compared with the 60W-75W incandescent it replaces. On a 15A branch circuit loaded to the usual 80 percent continuous limit (12A), that is a large number of fixtures, so the practical limit becomes the fixture count and wiring, not the lamp load.
How fast can I get the Satco Lighting S11432 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11432 come with a warranty?
Absolutely. The Satco Lighting S11432 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11432?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11432 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.