SATCO Lighting S11485 Ultra Bright Utility Lamp, 36W, PS30 LED, Dimmable, White Finish, Mogul Base, 5000K, 120V, High Lumen
Ultra Bright Utility Lamp - 36 Watt - PS30 LED - Dimmable - White Finish - Mogul Base - 5000K - 120 Volt - High Lumen
Manufacturer Resources
Product Specs
- Amps:
- 0.300A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- No
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Mogul
- Lamp Filament:
- LED
- Lamp Shape:
- PS30
- Lumens:
- 4500L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 300W
- Location Rating:
- Damp
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 36W
- Product Weight:
- 0.71 lb
- Product Material:
- Plastic
- Department:
- Electrical
Satco Lighting S11485 – Frequently Asked Questions
1) What incandescent wattage does the 36W Satco PS30 LED replace?
It replaces a 300 watt incandescent while drawing 36 watts at 120 volts, putting out 4500 lumens. Current draw is 0.300A, so a circuit that once carried a couple of 300W lamps has a lot of headroom after the swap.
2) Can I use this Satco mogul base LED outdoors in a barn light or parking canopy?
It carries a damp location rating and is listed for indoor and outdoor use, so a covered fixture, barn light, canopy or enclosed porch fixture is fine. It is not rated for wet locations, meaning direct rain or standing water exposure, and it has no enclosure rating, so open or vented fixtures are the safer choice over sealed ones.
3) Can I drop this LED into an existing HID high bay fixture with a ballast?
Not directly. The S11485 is a line-voltage 120V LED lamp, so the existing HID ballast must be bypassed and the mogul socket wired straight to 120V line. It is not a ballast-compatible retrofit lamp. Once bypassed, the mogul base threads into the same socket you already have.
4) Is the Satco S11485 dimmable, and will it work on my existing dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. It is a single-CCT lamp and is not three-way, so it will not step through levels in a three-way socket. Older incandescent dimmers often flicker or buzz with a 36W LED load because the load is far below what they were sized for, so an LED-rated dimmer is the practical pairing.
5) Can I mount this PS30 LED lamp base-up or sideways?
Yes. Burning position is universal, so base-up, base-down or horizontal all work. That matters on high bay and post-top fixtures where the socket points up. The 220 degree beam spread means light wraps well past straight down rather than throwing a narrow cone, so it fills a space rather than spotlighting.
6) What color light does the Satco 36W utility lamp put out, and will it match my other bulbs?
5000K, a crisp daylight white, with a CRI of 80. The housing is white finish. It is not CCT selectable, so if the rest of your fixtures are 3000K or 4000K you will see an obvious difference. For a warehouse, shop or garage where everything is going daylight, running all 5000K keeps the space consistent.
7) Is this Satco lamp DLC listed for utility rebate programs?
No. The S11485 is not DLC approved, so it will not qualify under rebate programs that require a DLC listing. It is FCC compliant. If a rebate is driving the purchase, a DLC-qualified fixture or lamp is what the program will want to see on the invoice.
8) How long does the Satco S11485 last before relamping?
Average rated life is 15,000 hours. On a 12 hour daily run that is roughly three and a half years between relamps, which is the argument for putting these in high or hard-to-reach sockets where a lift is needed to change a bulb.
9) Is the base on this Satco PS30 LED metal or plastic?
The base is plastic. That is normal on LED lamps and keeps weight down, but it means you should hand-tighten into the socket rather than torquing it with pliers, and avoid over-tightening in a hot high bay where the socket shell may have corroded.
How fast can I get the Satco Lighting S11485 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11485 come with a warranty?
Absolutely. The Satco Lighting S11485 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11485?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11485 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.