SATCO Lighting S11495 7W Econo LED PAR20, 4000K, 35 degree Beam Angle, Medium Base, 120-277V, Silver Finish

No. The S11495 Econo LED PAR20 is a non-dimming lamp. Put it on a dimmer circuit and you get flicker, buzz, or a dead lamp, and the dimmer can be damaged too. For dimmable locations, spec a PAR20 that lists dimming; for hallways, stairwells, closets and other switched-only circuits this one is fine. It is also not a three-way lamp, so it won't step through levels in a three-way socket.

Yes. The S11495 carries a wet location rating and is listed for indoor and outdoor use, so covered soffits, exterior canopies, and enclosed outdoor fixtures are all in scope. The lens is polycarbonate rather than glass, which holds up better to impact and freeze-thaw than a glass halogen PAR. Make sure the fixture itself is rated for the location as well.

It does. The lamp is rated 120V through 277V at 60Hz, so the same part number covers a 120V tenant space and a 277V commercial or industrial branch circuit. That's useful when you're standardizing one lamp across a building with mixed voltages. Current draw runs 0.058A at the low end of the range down to 0.025A at the high end.

4000K is neutral or cool white, a common spec for offices, corridors, garages and retail back-of-house. It will read noticeably cooler and whiter next to 2700K or 3000K warm lamps, so mixing them in the same room or the same row of cans will look wrong. The S11495 is a fixed color temperature lamp, not field-selectable, so you cannot switch it to 3000K on the job.

CRI is 90 on the S11495, which is the threshold most retail, hospitality and healthcare specs call for when color accuracy on merchandise, finishes or skin tone matters. Combined with a clear lens, you get a fairly crisp beam edge rather than the diffused wash a frosted lens gives.

Average rated life is 15,000 hours. On a 12 hour per day commercial schedule that's roughly 3.4 years of service before relamping, which is why property managers and MRO buyers use this class of lamp to get off an annual halogen replacement cycle. Base is glass with a medium screw fitting, so it removes and replaces like any standard PAR lamp.

Order Satco part number S11495. It ships in one configuration only, a silver housing, so there is no second finish or color temperature to specify. Silver refers to the reflector body of the lamp, not the light color, which is fixed at 4000K.