You may also like
SATCO Lighting S11542 12W, LED, 2700K, GU24 Base, 120V
12 Watt - LED - 2700K - GU24 base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.100A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90+
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Bi Pin GU24
- Lamp Filament:
- LED
- Lamp Shape:
- T3
- Lens Finish:
- Frost
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 1100L
- Operating Frequency:
- 60Hz
- Product Type:
- Squat
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 75W
- Location Rating:
- Damp
- Base Material:
- Metal / Plastic / Electronic Components
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 100
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 12W
- Product Weight:
- 0.14 lb
- Product Material:
- Metal / Plastic / Electronic Components
Satco Lighting S11542 – Frequently Asked Questions
1) Will the Satco S11542 GU24 LED work on a dimmer switch?
No. The S11542 is a non-dimmable lamp. Put it on a dimmer circuit and you risk flicker, buzz, or early failure. If the fixture is on a dimmer, either swap the control to a standard switch or specify a dimmable GU24 lamp instead.
2) Can I put this Satco GU24 LED in an enclosed ceiling fixture or a closed glass dome?
Yes. The S11542 is an enclosed rated lamp, so it can run inside a closed drum, dome, or jar fixture without the heat trapping shortening its life. It is also damp location rated, which covers a covered porch ceiling or a bathroom, but it is an indoor lamp and should not go in a wet location.
3) Will a GU24 twist-lock bulb fit my fixture, or do I need a screw base?
The S11542 has a bi-pin GU24 base, a two-prong twist-lock, not an Edison screw. It only drops into a GU24 socket, which is what you find in a lot of California Title 24 era fixtures and many CFL retrofit ceiling fixtures. If your socket takes a threaded bulb, this is the wrong lamp.
4) Will the 2700K color match the other bulbs already in my units?
At 2700K this is warm white, the same tone as a standard soft white incandescent, so it blends with existing incandescent or 2700K LED lamps. It is a fixed color temperature, not CCT selectable, so what you order is what you get. If your other fixtures run 3000K or 4000K, this one will read noticeably warmer next to them.
5) Is this GU24 LED good enough for color-critical spaces like retail or healthcare exam rooms?
CRI is 90+, which is the threshold most specs call for when color rendering matters, so skin tones and merchandise read accurately. Combined with 2700K and a frosted lens, it suits hospitality and residential-feel spaces more than high-contrast task areas.
6) Can this Satco GU24 bulb be mounted base-up, base-down, or sideways?
Burning position is universal, so base-up in a recessed can, base-down in a pendant, or horizontal in a wall sconce all work. The T3 squat shape keeps the overall profile short, which helps in shallow flush-mount fixtures where a taller lamp would press against the diffuser.
7) Can I use this bulb in a 3-way lamp socket?
It is not a three-way lamp. In a 3-way socket it will only operate at full output on the positions that energize it, and it cannot step through low, medium, and high. For a 3-way table lamp, specify a true 3-way rated bulb.
8) How wide is the light spread from this bulb, and will it light a room evenly?
Beam spread is 100 degrees, a wide flood pattern rather than a spot. Through the frosted plastic lens that gives diffuse general room light, so it works for ambient ceiling fixtures and sconces. For narrow accent or display aiming you want a directional reflector lamp instead.
9) How long will these GU24 LEDs last before maintenance has to relamp?
Average rated life is 25,000 hours. At roughly 12 hours a day in a common-area corridor that is about 5.7 years per lamp, so a bulk relamp pays off against the labor of chasing individual failures.
10) Does the Satco S11542 qualify for a DLC utility rebate?
No, it is not DLC approved, so it will not qualify under DesignLights Consortium based rebate programs. It is FCC compliant, and California sale is noted as lawful.
How fast can I get the Satco Lighting S11542 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11542 come with a warranty?
Absolutely. The Satco Lighting S11542 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11542?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11542 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.