SATCO Lighting S11764 9W, 2 Fo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$9.79
Satco Lighting SAT-S11764 9 Watt - 2 Foot LED - T8 - CCT Selectable - Type B Ballast Bypass - G13 Base - 120-277 Volt

SATCO Lighting S11764 9W, 2 Foot LED, T8, CCT Selectable, Type B Ballast Bypass, G13 Base, 120-277V

(No reviews yet) Write a Review

Model: S11764
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$9.79
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11764 9W, 2 Foot LED, T8, CCT Selectable, Type B Ballast Bypass, G13 Base, 120-277V

9 Watt - 2 Foot LED - T8 - CCT Selectable - Type B Ballast Bypass - G13 Base - 120-277 Volt

Manufacturer Resources

Product Specs

Amps:
0.075-0.032A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
Yes
DLC Approved:
Yes
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Glass
Lumens:
1150L/1150L/1250L/1250L/1250L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs - Ballast Bypass
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium Bi Pin
Base Material:
Glass / Plastic
Incandescent Equivalent:
40W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
210
Light Temperature:
3000K/3500K/4000K/5000K/6500K
Product Category:
Light Bulbs
Product Wattage:
9W
Department:
Electrical

Satco Lighting S11764 – Frequently Asked Questions

1) Can I put the Satco S11764 2-foot LED T8 into my existing fluorescent fixture without rewiring?
No. The S11764 is a Type B ballast bypass lamp, so the fixture has to be rewired to send line voltage straight to the sockets and the fluorescent ballast removed or disconnected. If you want a lamp that works on the existing ballast with no wiring change, you need a Type A (plug-and-play) tube instead. Once rewired, the lamp runs on anything from 120V to 277V at 50/60Hz.
2) Does the Satco S11764 fit standard 2-foot T8 fluorescent sockets?
It does. The S11764 is a T8 shape with a medium bi-pin (G13) base, which is the same lampholder a standard 2-foot F17T8 fluorescent sits in. The sockets stay; it is the wiring behind them that changes for ballast bypass.
3) How do I set the color temperature on the Satco S11764 CCT selectable LED tube?
The lamp is field selectable across 3000K, 3500K, 4000K, 5000K and 6500K, so one part number covers warm white through daylight. Output tracks the setting: 1150 lumens at 3000K and 3500K, 1250 lumens at 4000K, 5000K and 6500K. For property managers standardizing a building, that means stocking one tube and matching whatever is already in the other fixtures.
4) Does the Satco S11764 qualify for utility rebates or California Title 24?
The lamp is DLC approved, which is what most utility rebate programs require for commercial LED retrofits, and it is listed as Title 24 compliant for California work. It is also FCC compliant.
5) Is the Satco 9W 2-foot LED T8 bright enough to replace a 17W fluorescent tube?
At 9 watts it puts out 1150 to 1250 lumens depending on the color setting, with a 210 degree beam spread so light wraps around the tube rather than firing one direction only. CRI is 80.
6) Can the S11764 LED tube be used in a damp location like a parking garage or covered walkway?
Damp location rated, so covered exterior, garages, and bathrooms are fine. It is not rated for wet locations with direct water exposure. Burning position is universal, so it can be mounted horizontal, vertical, or in a strip fixture at any orientation.
7) What is the current draw on the Satco S11764 so I can size a circuit for a row of tubes?
Draw is 0.075A at 120V down to 0.032A at 277V, 50/60Hz. Multiply by lamp count for the branch circuit load on a bypass-wired run.
8) Can the Satco S11764 LED tube be dimmed or used on a three-way circuit?
No. The S11764 is a non-dimming, non three-way lamp. For dimmed spaces you need a tube specified as dimmable paired with a compatible driver or control.
9) How long does the Satco S11764 LED T8 last before relamping?
Rated at 50,000 average hours. On a 12-hour-a-day schedule that is roughly 11 years, which is why MRO buyers use bypass tubes to get the ballast out of the maintenance cycle entirely.
10) Is the Satco S11764 a glass tube or plastic?
Glass lens with a frosted finish, glass and plastic base construction, and a white housing. The frost diffuses the LEDs so you do not see individual diodes through an open strip fixture.
How fast can I get the Satco Lighting S11764 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11764 come with a warranty?
Absolutely. The Satco Lighting S11764 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11764?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11764 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!