You may also like
SATCO Lighting S11801R1 9W LED Downlight Retrofit, 5-6in, CCT Selectable, Round, White Finish, 120V
Model: SATCO-S11801R1
SATCO Lighting S11801R1 9W LED Downlight Retrofit, 5-6in, CCT Selectable, Round, White Finish, 120V9 Watt LED Downlight Retrofit - 5-6 Inches - CCT Selectable - Round - White Finish - 120...
Satco Lighting
$16.95
SATCO Lighting S11821R1 9W LED Downlight Retrofit, 5-6in, CCT Selectable, Square, White Finish, 120V
Model: SATCO-S11821R1
SATCO Lighting S11821R1 9W LED Downlight Retrofit, 5-6in, CCT Selectable, Square, White Finish, 120V9 Watt LED Downlight Retrofit - 5-6 Inches - CCT Selectable - Square - White Finish - 120...
Satco Lighting
$18.95
SATCO Lighting S11835 9W, LED Downlight Retrofit, 5in, 6in, CCT Selectable, 120V, Dimmable, Black Finish
9 Watt - LED Downlight Retrofit - 5 Inch - 6 Inch - CCT Selectable - 120 volts - Dimmable - Black Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium Adapter
- Lamp Shape:
- Integrated LED
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Downlight Retrofit
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cULus - Certified;cULus - Classified
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- No
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11835/S11835_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11835.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Diameter:
- 7.41"
- Product Dimension:
- H:3.25" DIA:7.41"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Contemporary
- Product Height:
- 3.25"
- Product Category:
- Fixtures
- Product Wattage:
- 9W
- Product Material:
- Aluminum
- Product Width:
- 7.41 in
- Product Weight:
- 0.765 lb
- Department:
- Electrical
Satco Lighting S11835 – Frequently Asked Questions
1) Will the Satco S11835 retrofit downlight fit both 5 inch and 6 inch recessed cans?
Yes. The S11835 is built as a 5 inch / 6 inch retrofit, so one part covers both can sizes. The trim measures 7.41 inches in diameter and the body is 3.25 inches deep, so the housing needs at least that much clearance above the ceiling and the 7.41 inch flange will cover the cut opening on either size can.
2) Can I set the color temperature on the Satco S11835 downlight in the field?
Yes, it is CCT selectable on the fixture across five settings: 2700K, 3000K, 3500K, 4000K and 5000K. For a property manager standardizing a building, that means you can stock one part and dial warm 2700K for residential corridors or 4000K for back-of-house without carrying five SKUs.
3) Can this Satco retrofit downlight be used in a shower or over a covered porch?
The S11835 carries a Wet location rating, so moisture exposure such as a shower trim or a soffit is within rating. Satco lists it as an indoor fixture, so keep it under cover rather than fully exposed, and the can it goes into must itself be rated for the location.
4) Does the Satco S11835 meet California Title 24?
No. The S11835 is not Title 24 compliant, so it should not be specified for a California project where Title 24 compliant luminaires are required. It is cULus Certified and cULus Classified, FCC compliant and RoHS compliant.
5) Is the Satco S11835 dimmable, and what voltage does it run on?
It is dimmable and runs on 120V at 60Hz line power, so it drops onto standard residential and light commercial branch circuits. It needs a dimmer rated for LED loads; a legacy incandescent dimmer left on the wall is the usual cause of flicker or limited dimming range on a retrofit like this.
6) How long does this LED downlight last, and is the housing metal or plastic?
Rated life is 50,000 hours, and the body is aluminum rather than plastic, which helps heat get out of an enclosed can. At 12 hours a day in a corridor that is over 11 years of service, which is why MRO buyers use retrofits like this to get off a re-lamp cycle.
7) What color is the trim on the Satco S11835?
Black, and that is the only finish this model is offered in. If you need white or brushed nickel trim to match existing openings, you are looking at a different Satco part number, not an option on S11835.
8) Is the Satco S11835 light enough to hang from the socket adapter alone?
It weighs 0.765 lb, light enough that the medium base adapter plus the trim's spring clips carry it in a standard can. Satco publishes install instructions with the fixture for the clip and adapter sequence.
How fast can I get the Satco Lighting S11835 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11835 come with a warranty?
Absolutely. The Satco Lighting S11835 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11835?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11835 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.