You may also like
SATCO Lighting S12450 21W, A23 LED, Frost Finish, Medium Base, 3000K, 120V
21 Watt - A23 LED - Frost Finish - Medium base - 3000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.175A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A23
- Lumens:
- 2900L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 200W
- Location Rating:
- Wet
- Base Material:
- Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 21W
- Product Weight:
- 0.13 lb
- Product Material:
- Glass
- Department:
- Electrical
Satco Lighting S12450 – Frequently Asked Questions
1) Can the Satco S12450 A23 LED bulb be used on a dimmer switch?
No. The S12450 is a non-dimmable lamp, so it has to run on a plain on/off circuit. Put it on a dimmer and you risk flicker, buzz, or early failure. It is also not a three-way bulb, so it will not step through levels in a three-way socket. For dimming applications, pick a lamp specifically listed as dimmable.
2) Will this Satco A23 LED replace a 200 watt incandescent bulb?
That is exactly what it is sized for. The S12450 draws 21 watts and puts out 2900 lumens, which Satco rates as a 200W incandescent equivalent. Light output color is 3000K, a soft warm white, so it will read warmer than a daylight lamp if you are mixing it into existing fixtures.
3) Can this A23 LED bulb go in an outdoor fixture or a damp area?
It carries a wet location rating and is listed for indoor and outdoor use, so exterior coach lights, covered walkways, parking-area fixtures, and bathrooms or laundry rooms are all in scope. Burning position is universal, so you can mount it base-up, base-down, or horizontal without derating.
4) Is the color quality of this 3000K Satco LED good enough for hospitality or retail spaces?
CRI is 80, which is the common commercial benchmark for corridors, back-of-house, lobbies, and general area lighting. At 3000K it reads as warm white. If your spec sheet calls for 90+ CRI for merchandise or guest-room accent lighting, this one will not meet it. Color is fixed, not CCT selectable, so every lamp in the order lands at 3000K.
5) Is the Satco S12450 approved for utility rebate programs?
It is not DLC listed, so it will not qualify under programs that require a DLC-approved product. It is FCC compliant for electromagnetic emissions and is marked lawful for sale in California. If your rebate paperwork hinges on a DLC listing, you will need a different lamp.
6) What is the exact part number and finish for this Satco A23 LED so I can order more of the same?
Order Satco S12450. It is sold in one configuration: frost finish, A23 shape, medium base, 21W, 3000K, 120V. There are no alternate finishes or color temperatures under this number, so repeat orders land identical every time, which matters when you are standardizing lamps across a building.
7) Does the frost finish on this Satco A23 bulb cut glare in open fixtures?
The frosted glass diffuses the LED sources so you do not see hot spots through a bare or open shade, and the beam spread is 300 degrees, meaning light goes nearly all the way around the lamp rather than throwing in one direction. That suits table lamps, open pendants, and exterior fixtures where you want the light spread wide.
8) How long does the Satco S12450 last before it needs re-lamping?
Rated average life is 15,000 hours. On a dusk-to-dawn exterior schedule of roughly 12 hours a day that works out to about three and a half years between changes, which is the number to use when you are budgeting a maintenance cycle across a portfolio.
How fast can I get the Satco Lighting S12450 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12450 come with a warranty?
Absolutely. The Satco Lighting S12450 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12450?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12450 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.