SATCO Lighting S21267 4W B11 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.95

SATCO Lighting S21267 4W B11 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

(No reviews yet) Write a Review

Model: S21267
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21267 4W B11 LED, Clear, Candelabra Base, 90 CRI, 4000K, 120V

4 Watt B11 LED - Clear - Candelabra base - 90 CRI - 4000K - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.033A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
B11
Lumens:
350L
Operating Frequency:
60Hz
Product Type:
Candle
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass / Nickel Plated Aluminum
Incandescent Equivalent:
40W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
4W

Satco Lighting S21267 – Frequently Asked Questions

1) Can I use this 4W B11 LED in an enclosed or outdoor fixture?
Yes on both counts. The S21267 is an enclosed rated lamp, so it can run inside a closed globe or lantern where heat builds up, and it carries a Wet location rating for indoor or outdoor use. That covers covered entries, porch lanterns and exterior sconces.
2) Is this Satco candelabra LED dimmable on my existing wall dimmer?
The S21267 is a dimmable lamp on 120V. It draws only 0.033A, so on a legacy incandescent dimmer a small number of lamps may sit below the dimmer's minimum load and flicker or drop out at the low end. On a chandelier with several lamps, or on an LED-rated dimmer, that isn't a concern.
3) Will 4000K look the same as the warm candelabra bulbs already in my building?
No. The S21267 is 4000K, a neutral white, and it will read noticeably cooler and whiter next to the 2700K warm-white lamps most chandeliers and sconces are stocked with. Mixing them in the same fixture or the same corridor is obvious. Lamp the whole run at 4000K, or pick a warmer Satco B11 if you're matching existing. The colour temperature is fixed here, not selectable.
4) Is a 90 CRI candelabra bulb worth it for hospitality or retail spaces?
90 CRI is the reason to spec this one. In lobbies, dining rooms, guest corridors and retail display, 90 CRI renders skin tones, wood finishes and fabric far closer to true than the 80 CRI lamps that fill most maintenance carts. Paired with 4000K neutral white, it suits spaces where merchandise or food appearance matters.
5) Does this clear filament bulb throw light in all directions in an open chandelier?
Yes. The S21267 is an LED filament lamp with a 300 degree beam spread, so light goes out sideways and back up the stem rather than firing only forward. That's what you want in an open candelabra fixture where the lamp is visible and lighting the ceiling as well as the room. It's also universal burning position, so base up, base down or sideways all work.
6) How long will these last before my maintenance crew has to relamp?
Average rated life is 15,000 hours. On a lobby or corridor fixture burning about 12 hours a day that's roughly 3.4 years between relamps, versus the annual ladder trips a 40W incandescent candle bulb demands.
7) Does the Satco S21267 meet California Title 24?
Yes, it is listed as Title 24 compliant, and it's FCC compliant as well. Worth noting for California projects that it is not DLC listed, so it won't qualify for utility rebate programs that require DesignLights Consortium listing.
8) Can I use this bulb in a three-way candelabra socket?
No. The S21267 is not a three-way lamp. In a three-way socket it will run at a single output level rather than stepping. For three-way operation you need a lamp specifically built for it.
9) What is the Satco S21267 bulb made of, and is the base corrosion resistant?
Glass envelope with a nickel plated aluminum base. Nickel plating resists the corrosion and socket seizing you get with plain brass in damp locations, which matters given the lamp's Wet location rating for exterior lanterns.
How fast can I get the Satco Lighting S21267 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21267 come with a warranty?
Absolutely. The Satco Lighting S21267 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21267?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21267 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.