SATCO Lighting S21269 4W B11 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.95

SATCO Lighting S21269 4W B11 LED, Frost, Candelabra Base, 90 CRI, 2700K, 120V

(No reviews yet) Write a Review

Model: S21269
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21269 4W B11 LED, Frost, Candelabra Base, 90 CRI, 2700K, 120V

4 Watt B11 LED - Frost - Candelabra base - 90 CRI - 2700K - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.033A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
B11
Lumens:
350L
Operating Frequency:
60Hz
Product Type:
Candle
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass / Nickel Plated Aluminum
Incandescent Equivalent:
40W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
4W

Satco Lighting S21269 – Frequently Asked Questions

1) Can the Satco S21269 candelabra LED bulb go in an enclosed fixture?
Yes. The S21269 is an enclosed rated lamp, so it can go in a closed globe, lantern, or sealed sconce without voiding the lamp. It also carries a wet location rating and is listed for indoor or outdoor use, which covers exterior lanterns and covered entries.
2) Is the Satco S21269 dimmable on an existing wall dimmer?
The lamp is dimmable at 120V, 60Hz. At 0.033A draw per lamp, a chandelier of them pulls very little current, which is the usual reason older magnetic or high-minimum-load dimmers flicker or refuse to start. For a smooth dim, use an LED-rated dimmer with a low minimum load.
3) What incandescent candelabra bulb does this 4 watt LED replace?
It replaces a 40W incandescent candle bulb, putting out 350 lumens on 4 watts. Same light, roughly a tenth of the load, which matters when a single chandelier carries six or twelve sockets on one circuit.
4) Will this frosted 2700K bulb match the warm white bulbs already in my building?
Color temperature is 2700K, the warm white tone of a standard incandescent, and it is fixed, not CCT selectable. CRI is 90, so colors and skin tones read accurately, which is why it works in hospitality and residential common areas. The frost finish diffuses the LED filament so you do not see hot spots through a clear shade.
5) Can this candle bulb be installed base up or sideways in a sconce?
Burning position is universal, so base up, base down, or horizontal are all fine. That covers upward-facing chandelier arms, downward candle sconces, and the angled sockets in outdoor lanterns.
6) Does the Satco S21269 meet California Title 24 for a residential lighting job?
Yes, it is Title 24 compliant, and it is FCC compliant as well. It is not DLC listed, so if a commercial rebate program requires DLC, this lamp will not qualify for it.
7) How long will these last before maintenance has to relamp the fixture?
Rated at 15,000 average hours. On a 12 hour a day lobby or corridor schedule that is roughly 3.4 years of service, which is the trade-off property managers weigh against pulling a ladder for incandescent candle bulbs every few months.
8) Does this candle LED throw light all the way around, or just up like a spot?
Beam spread is 300 degrees, so it lights nearly the full sphere around the lamp. That is what you want in an open chandelier or a glass lantern where the bulb is visible from every side; a narrow beam lamp would leave dark arcs.
9) Is this a three-way bulb?
No. The S21269 is a single-output lamp, not three-way. In a three-way socket it will run at one light level only. Dimming is handled by a dimmer on the circuit instead.
10) What is the Satco S21269 made of, and will the base corrode in an outdoor lantern?
Glass envelope with a nickel plated aluminum base. The nickel plating is what lets it carry a wet location rating for exterior lanterns and covered porches rather than being restricted to dry interior use.
How fast can I get the Satco Lighting S21269 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21269 come with a warranty?
Absolutely. The Satco Lighting S21269 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21269?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21269 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.