You may also like
SATCO Lighting S21350 8W T10 LED, Clear, Medium Base, 90 CRI, 2700K, 120V
Satco's 8-watt, LED lamp is traditional, yet contemporary with its vintage style and energy saving LED technology. Elegantly illuminate any room in the house with this dimmable, clear bulb. Sophisticated and modern, this lamp delivers 15,000 hours of warm white light.
- MOL: 5.00 inches, MOD: 1.25 inches
- Medium Base
- Clear Finish
- T10 Lamp Shape
- 2700K Warm White Light
- Rated for 15000 hours
- Dimmable
- 3-year limited warranty
- Superior 90 CRI light quality
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.067A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- T10
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Tubular
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- Base Material:
- Glass / Nickel Plated Aluminum
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8W
- Product Weight:
- 0.06 lb
- Product Material:
- Glass / Nickel Plated Aluminum
Satco Lighting S21350 – Frequently Asked Questions
1) Can this 8W T10 LED filament bulb be used in a fully enclosed fixture?
Yes, it is an enclosed rated lamp, so sealed jelly jars, closed globes and lantern fixtures are fine. That matters with LED filament lamps because non-enclosed-rated versions cook themselves in trapped heat and fail early. It also carries a wet location rating and is listed for indoor or outdoor use, so covered porches and exterior fixtures are in scope.
2) Is this Satco T10 LED filament bulb dimmable, and what dimmer should I pair it with?
The lamp is dimmable on 120V, 60Hz line voltage. Pair it with an LED-rated (electronic low wattage) dimmer rather than an old incandescent rheostat. At 0.067 amps per lamp, a load that a legacy dimmer handled fine on incandescents may now sit below that dimmer's minimum load and cause flicker or drop-out.
3) Is 90 CRI worth specifying for guest rooms and lobbies, or is a standard bulb fine?
This Satco T10 filament lamp is rated 90 CRI, which is the level spec writers call for where finishes, skin tones and food need to read correctly: hotel lobbies, restaurants, retail display, healthcare. Standard LED lamps usually sit around 80 CRI. If you are standardizing a property, keeping every decorative socket at 90 CRI avoids the mismatched look you get when two color-rendering grades sit in the same room.
4) Does this LED tube bulb have a visible filament like a vintage Edison bulb?
Yes. It is an LED filament lamp in a clear glass T10 tube, so the filament strips are on show the way a vintage carbon-filament tube looks. The clear glass and 300 degree beam spread throw light in nearly every direction, which is what you want in an exposed-bulb fixture where the lamp is part of the look.
5) How often will maintenance have to relamp these, compared with the incandescent tubes they replace?
The S21350 is rated for 15,000 average hours. On a 12 hour a day corridor or exterior schedule that is roughly 3.4 years per lamp. Incandescent decorative tubes typically run 1,000 to 2,000 hours, so a property manager pulling ladders for relamping is doing it a fraction as often.
6) Is this Satco lamp a color-selectable or three-way bulb?
No on both counts. It is a fixed single-output lamp: not CCT selectable and not three-way, so it will not step through light levels in a three-way socket. If you need level control, use it on an LED-compatible dimmer instead, since the lamp is dimmable.
7) Does the Satco S21350 qualify for a DLC utility rebate?
No. This lamp is not DLC approved, so it will not be accepted on rebate programs that require a DesignLights Consortium listing. It is FCC compliant, and Satco notes it as lawful for sale in California.
8) What is the S21350 bulb actually made of, and will it hold up in an exterior fixture?
Glass tube with a nickel plated aluminum base. Nickel plating resists the corrosion and socket seizing you get with plain brass or plated steel bases in damp exterior sockets, and the lamp carries a wet location rating for indoor or outdoor use.
How fast can I get the Satco Lighting S21350 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21350 come with a warranty?
Absolutely. The Satco Lighting S21350 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21350?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21350 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.