You may also like
SATCO Lighting S21357 8W T9 LED, Frost, Medium Base, 90 CRI, 3000K, 120V
8 Watt T9 LED - Frost - Medium base - 90 CRI - 3000K - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Dimmable:
- Yes-Dimmable
- Product Weight:
- 0.11 lb
- Product Material:
- Glass / Nickel Plated Aluminum
- CRI:
- 90+
- Lumens:
- 700L
Satco Lighting S21357 – Frequently Asked Questions
1) What color light does the 3000K Satco S21357 give off, and will it match my existing warm white bulbs?
3000K is warm white, a soft warm tone rather than the yellower 2700K of a classic incandescent or the neutral look of 3500K and up. If the other bulbs in the run are 3000K, the S21357 matches. Mixing it into a row of 2700K bulbs will read slightly cooler side by side.
2) If I am standardizing bulbs across a building, what exactly do I order to repeat this one?
Order Satco part number S21357. That single number covers the 8W T9 LED in frost, medium base, 3000K, 90 CRI, 120V, and there is only one configuration of it, so there is no finish or color temperature choice to get wrong on a reorder.
3) Is 90 CRI good enough for retail display or a healthcare exam room?
The S21357 is a 90 CRI lamp, which puts it in the high color rendering tier used where color accuracy matters, retail merchandise, salon and makeup areas, exam and treatment rooms, and art display. Most commodity LED lamps sit at 80 CRI. If a spec on the job calls for 90 CRI minimum, this lamp meets it.
4) What does the frost finish on the Satco S21357 do compared to a clear bulb?
Frost is the only finish this T9 lamp is offered in, and it diffuses the light so the individual LED emitters do not show as bright points through the glass. That is what you want in an exposed fixture, a bare socket, or a shade where a clear lamp would throw visible hot spots and glare. If the look you want is a visible filament effect, a frosted lamp is the wrong choice.
5) How much power does the Satco S21357 T9 LED draw for a building energy calculation?
8 watts per lamp at 120 volts. For a property manager or MRO buyer figuring connected load across a fleet of fixtures, that is the number to multiply, and it is the whole draw since there is no separate ballast or remote driver in the circuit.
6) Can I use the Satco S21357 on a dimmer switch?
Dimming is a specification you need confirmed lamp by lamp, and not every 120V LED lamp is dimmable. What the S21357 does state is 8 watts on 120 volt with a medium base at 3000K and 90 CRI. If the fixture is on a dimmer, order a lamp whose data explicitly states dimmable so you do not get flicker or dropout at the low end of the sweep.
How fast can I get the Satco Lighting S21357 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21357 come with a warranty?
Absolutely. The Satco Lighting S21357 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21357?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21357 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.