SATCO Lighting S21812 4.5W G16...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.43

SATCO Lighting S21812 4.5W G16.5 LED, White, Candelabra Base, 2700K, 350 Lumens, 120V, 2-Pack

(No reviews yet) Write a Review

Model: S21812
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S21812 4.5W G16.5 LED, White, Candelabra Base, 2700K, 350 Lumens, 120V, 2-Pack

4.5 Watt G16.5 LED - White - Candelabra Base - 2700K - 350 Lumens - 120 Volt - 2-Pack

Manufacturer Resources

Product Specs

Amps:
0.038A
Avg Rated Hours:
15000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED Filament
Lamp Shape:
G16.5
Lumens:
350L
Operating Frequency:
60Hz
Product Type:
Globe
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Candelabra
Base Material:
Glass / Copper
Incandescent Equivalent:
40W
Location Rating:
Wet
CRI:
90
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
320
Light Temperature:
2700K
Product Category:
Light Bulbs
Product Wattage:
4.5W
Product Weight:
0.075 lb
Product Material:
Glass / Copper

Satco Lighting S21812 – Frequently Asked Questions

1) Will the Satco S21812 candelabra LED work in an enclosed outdoor fixture?
Yes on both counts. The S21812 G16.5 filament lamp is an enclosed rated lamp and carries a Wet location rating, so it can go in a sealed porch lantern, a post top, or a covered sconce exposed to weather. It is listed for indoor or outdoor use, and burning position is universal, so base up, base down, or horizontal all work.
2) Can I swap a 40 watt candelabra incandescent for this Satco LED and keep the same brightness?
Yes. At 4.5 watts the S21812 puts out 350 lumens and is rated as a 40W incandescent equivalent, so the light level in a chandelier or bath bar stays where it was while the draw per lamp falls to 0.038 amps on a 120V, 60Hz circuit. Useful if you're pushing a multi-socket fixture that was near its wattage limit.
3) Does the Satco S21812 meet California Title 24 for a lighting retrofit?
Yes, it is Title 24 compliant, which is the box to tick on California residential and multi-family lighting work. It is also FCC compliant. It is not DLC approved, so if a commercial utility rebate program requires a DLC listing, this lamp will not qualify for it.
4) Is the Satco S21812 dimmable on an existing wall dimmer?
The lamp is dimmable. One thing to watch: it is not a three-way lamp, so it will not step through levels in a three-way socket the way a 40/60/100 incandescent does. For a chandelier on a dimmer, run it on a dimmer rated for LED loads and size the load to the 4.5 watts per lamp it actually pulls.
5) Will these LED candelabra bulbs match the warm color of the incandescents already in my other fixtures?
2700K is the warm color point that reads closest to a standard soft white incandescent, so mixing these into a building where some sockets still hold incandescent lamps looks consistent. Color is fixed, not selectable, so every bulb in a case is the same 2700K, which is what you want when you're standardizing lamps across a lobby or a corridor of units. CRI is 90, so wood tones and skin tones render well.
6) Does this Satco candelabra LED throw light in all directions like a regular bulb?
Close to it. The beam spread is 320 degrees, so it lights nearly the full sphere rather than firing in one direction. That matters in an open chandelier or an exposed globe fixture where the bulb is visible from every side and a directional LED would leave dark spots. It is an LED filament lamp inside a white finish glass globe, with glass and copper construction.
7) How long do the Satco S21812 LED candelabra bulbs last before relamping?
Rated at 15,000 average hours. On a common area fixture burning roughly 12 hours a day that's several years between ladder trips, which is the usual reason a property manager moves a chandelier or exterior sconce off incandescent candelabra lamps in the first place.
8) How many bulbs come with Satco S21812?
S21812 ships as a 2-pack of the 4.5W G16.5 white candelabra lamp. For a five or six light chandelier, count sockets and order packs accordingly so the whole fixture gets relamped at once and the color stays uniform.
How fast can I get the Satco Lighting S21812 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21812 come with a warranty?
Absolutely. The Satco Lighting S21812 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21812?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21812 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.