SATCO Lighting S21818 3W B11 LED, Frosted, Candelabra Base, 2700K, 200 Lumens, 120V, 2-Pack
3 Watt B11 LED - Frosted - Candelabra Base - 2700K - 200 Lumens - 120 Volt - 2-Pack
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
Satco Lighting S21818 – Frequently Asked Questions
1) What wattage incandescent does this 3W Satco B11 LED replace?
At 3 watts drawing 200 lumens, the S21818 covers the light output range of a small decorative incandescent while pulling a fraction of the power. Judge it on the 200 lumen figure rather than the watts, since LED wattage and incandescent wattage are not comparable.
2) Is the light from the Satco S21818 warm or cool?
2700K, which is warm white, the same yellow-toned light a standard incandescent puts out. If you are mixing these into a fixture alongside existing incandescent or halogen lamps, the color will match. Do not mix them with 3000K or 4000K lamps on the same chandelier, as the difference is obvious side by side.
3) How many bulbs come in a Satco S21818 order?
S21818 ships as a 2-pack, so one order covers two sockets. For a six-arm chandelier you would need three packs to relamp the whole fixture. Property managers standardizing a building should count sockets, not fixtures, before ordering.
4) Can I use the Satco S21818 on standard 120V house wiring?
Yes, it is a 120 volt lamp, which is standard North American line voltage for residential and commercial branch circuits. It is not a low-voltage 12V lamp, so it does not go in a transformer-fed landscape or track system.
5) What is a B11 bulb shape and will it fit inside my fixture shade?
B11 is the small bullet or torpedo shape commonly used in chandeliers and candelabra fixtures, roughly 11 eighths of an inch across at its widest point. That is the same envelope as the decorative candle lamps it replaces, so it clears the small glass shades and candle sleeves those fixtures use.
6) Is the Satco S21818 B11 bulb clear or frosted?
Frosted. The frosted finish diffuses the light and hides the LED filament or diode array, which matters in open chandeliers and sconces where the bulb is visible. If you want a visible filament look through clear glass, this is not the one.
7) What is the exact Satco part number to reorder this candelabra LED?
Order Satco Lighting S21818. That number covers the 3W B11 frosted candelabra base lamp at 2700K, 200 lumens, 120V, sold two to a pack. Give that MPN to a distributor and you will get the same lamp every time.
How fast can I get the Satco Lighting S21818 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S21818 come with a warranty?
Absolutely. The Satco Lighting S21818 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S21818?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S21818 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.