SATCO Lighting S21829 5.5W B11 LED, Clear, Candelabra Base, 5000K, 500 Lumens, 120V, 2-Pack

The Satco S21829 B11 LED puts out 500 lumens on 5.5 watts, which is in the range a 40 watt incandescent candelabra bulb produces. For a property manager relamping chandeliers, sconces or corridor fixtures, that is a like-for-like light output at roughly a tenth of the draw, and it runs on standard 120 volt line power with no driver or transformer to add.

5000K is daylight white, a crisp bluish white rather than the warm yellow of an incandescent flame-tip bulb. In a lobby, stairwell, laundry room or exterior sconce that reads clean and bright. In a residential chandelier or dining room where the other bulbs are warm, it will look noticeably cooler and mismatched, so relamp the whole fixture at once if you go this route.

Clear. The filament-style clear envelope means the light source is visible through the glass, which is what you want in an open chandelier or a fixture with exposed sockets where the bulb is part of the look. In a fixture with no shade at eye level, clear glass will show more glare than a frosted bulb would.

Two bulbs per pack. A typical chandelier or multi-light sconce takes more than that, so count your sockets and multiply. For a fleet relamp across a building, work out total sockets and order in pairs.

Yes, it is a 120 volt line voltage lamp that drops straight into an existing candelabra socket with no transformer, driver or wiring change. At 5.5 watts each, the load per bulb is a fraction of the incandescent it replaces, so a circuit that already carried the old lamps has ample headroom.