SATCO Lighting S23407 2W C11 LED, Satin Spun, Amber, Medium Base, 2100K, 100 Lumens, 120V

It puts out 100 lumens at 2 watts, which is decorative light, not task or room lighting. At 2100K the color is deep amber, close to the look of a vintage filament or candle flame. Use it in chandeliers, sconces, string lights, restaurant and hospitality fixtures, and signage where you want the warm glow rather than illumination. If a property manager needs a usable light level in a fixture, this is the wrong lamp.

Neither exactly. The finish is satin spun amber, a soft diffused amber glass rather than a clear bulb with a visible filament. Light comes out evenly tinted instead of showing a hot filament line, so it is a better choice for exposed fixtures where glare would be an issue.

Only if those bulbs are also amber. 2100K reads distinctly orange-gold, well below the 2700K warm white most residential lamps run. Mixing this with 2700K or 3000K lamps in the same chandelier will look mismatched. If you are relamping a fixture, do all the sockets at once with the same S23407.

Yes, if the existing lamp is a medium base C11 on a 120V circuit. The S23407 draws 2 watts against the 15 to 25 watts a decorative incandescent typically pulls, so a large relamp across a restaurant or hotel lobby cuts load significantly. Light output drops to 100 lumens though, so confirm you are replacing a decorative lamp and not one doing real work.

Order by Satco part number S23407. It comes one way only, the spun amber satin finish, so there is no finish or color temperature choice to specify. Every one is 2W, 2100K, 100 lumens, medium base, 120V.