SATCO Lighting S28492 7.5W, BR30 LED, 4000K, Medium Base, 120V

The S28492 is a dimmable lamp. Keep in mind a 7.5 watt load is well under the minimum load of many older incandescent-style dimmers, so a bank of these on one circuit may still need an LED-rated dimmer to avoid flicker or drop-out at the low end.

4000K is a neutral white, cooler and crisper than the 2700K to 3000K warm white used in most residential fixtures and warmer than 5000K daylight. It reads clean in corridors, kitchens, retail, and commercial space. If the other cans in the building are 2700K or 3000K, mixing in the S28492 will show an obvious color difference in the same room, so standardize by room rather than by fixture.

CRI is 90+, which is the threshold most retail, healthcare, and hospitality specs call out when color accuracy matters. Standard LED lamps commonly sit around 80 CRI, so this is a step up for displaying merchandise, finishes, or skin tones.

The lamp body is plastic, not glass. For property managers that matters in stairwells, laundry rooms, and tenant units where a dropped glass reflector lamp means a cleanup and a hazard. It also keeps the lamp light at 0.16 lb, so it will not sag in older spring-clip or gimbal trims.

The S28492 ships with a frost finish, which diffuses the LED array so you do not see individual hot spots when looking up into an open can or a bare-lamp fixture. That is the only finish this lamp comes in.