SATCO Lighting S29414 12.5W, PAR30SN LED, 5000K, 25 degree Beam Angle, Medium Base, 120V

For washing a whole room, yes. The S29414 puts out a 25 degree beam, which is a narrow flood, so it throws a tight controlled pool of light. That is what you want for retail accent work, artwork, signage, high ceilings, or track heads aimed at a feature. For even ambient coverage across a ceiling grid you want a wider flood beam instead.

5000K is daylight white, a crisp blue-white with no yellow in it. Next to a 2700K or 3000K lamp it will read noticeably cooler, so if you are relamping only part of a run the mismatch will be obvious. The S29414 is a good fit for parking structures, warehouses, work areas and security lighting where you want the light to read bright and neutral rather than cozy.

12.5 watts at 120 volts. For a property manager relamping a bank of incandescent or halogen PAR30s, that is the number to use when you recalculate circuit loading on a track or a row of cans, since the old lamps were typically pulling several times that per socket.

Satco S29414. That covers the 12.5 watt PAR30 short neck LED, 5000K, 25 degree beam, medium base, 120 volt, clear. Distributors should quote it as S29414 rather than by description, since Satco's PAR30 line runs the same wattage across several color temperatures and beam spreads.

Clear is the only finish offered on the S29414. There is a single orderable configuration under that part number, so there is no frosted or diffused version of this lamp to specify.

Track heads are a natural fit, since a 25 degree narrow flood in a medium base is exactly what accent track is built around. For anything outdoors or in a damp location, the fixture's own wet or damp location rating governs, and that is what you check before installing.