You may also like
SATCO Lighting S29440 15W, PAR38 LED, 2700K, 25 degree Beam Angle, Medium Base, 120V
15 Watt - PAR38 LED - 2700K - 25 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- CRI:
- 90+
- Dimmable:
- Yes-Dimmable
- Product Weight:
- 0.49 lb
- Lumens:
- 1200L
- Product Material:
- Plastic
Satco Lighting S29440 – Frequently Asked Questions
1) Is a 25 degree beam angle too narrow for general room lighting?
Yes, for general ambient light. The S29440's 25 degree beam is a narrow flood/spot pattern meant for accent work: artwork, signage, retail merchandise, architectural washes, or high-ceiling downlights where you want a tight pool of light. For even room coverage in a lobby or corridor you want a wider PAR38 flood beam instead.
2) What color does the Satco S29440 produce, and will it match my existing halogen PAR38 lamps?
The S29440 runs 2700K, the warm white tone halogen PAR38 lamps produce, so it blends with halogen on the same circuit. CRI is 90+, which matters if you are lighting merchandise, artwork, or finishes where color accuracy shows. If the rest of your building is on 3000K or 4000K lamps, this one will read noticeably warmer.
3) Is the Satco S29440 PAR38 dimmable, and how bright is it?
It is a dimmable lamp, rated 1200 lumens at 15 watts. Dimming performance depends on the control, so a LED-rated dimmer is the right pairing for smooth low-end travel on a 15W load.
4) What halogen PAR38 wattage does a 15W LED PAR38 replace?
At 15 watts and 1200 lumens, the S29440 sits in the range of a 75 watt halogen PAR38 in output while drawing a fraction of the power. Because the beam is 25 degrees, it is the direct stand-in for a halogen narrow flood or spot, not a wide flood.
5) Can I use the Satco S29440 PAR38 in an outdoor fixture or wet location?
Treat it as an indoor lamp. The S29440 is a plastic-bodied PAR38 catalogued for indoor lighting, and no wet or damp location rating is carried for it. For exterior floods and soffit cans, specify a PAR38 LED that is explicitly rated for the location.
6) How much does a Satco S29440 PAR38 LED weigh, and will it hold in a track head or gimbal?
Each lamp weighs 0.49 lb, lighter than a glass halogen PAR38 of the same size thanks to the plastic housing. That lower mass is easier on aging track heads and gimbal rings that tend to droop under heavier halogen lamps.
7) Does the Satco S29440 come in anything other than a clear lens?
Clear is the single configuration for the S29440, part number S29440. If you need a frosted or diffused face to soften the hot spot, that is a different PAR38 lamp.
How fast can I get the Satco Lighting S29440 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29440 come with a warranty?
Absolutely. The Satco Lighting S29440 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29440?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29440 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.