You may also like
SATCO Lighting S29446 15W, PAR38 LED, 3000K, 40 degree Beam Angle, Medium Base, 120V
15 Watt - PAR38 LED - 3000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.125A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR38
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1200L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 90W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 15W
- Product Weight:
- 0.49 lb
- Product Material:
- Plastic
Satco Lighting S29446 – Frequently Asked Questions
1) Can the Satco S29446 PAR38 LED go in an enclosed fixture?
Yes. The S29446 is an enclosed rated lamp, so it can be installed in sealed or fully enclosed fixtures where most LED lamps overheat and fail early. It also carries a Wet location rating and is listed for indoor or outdoor use, which covers enclosed exterior wall packs, soffit cans and covered canopy fixtures. Burning position is universal, so base up, base down or horizontal all work.
2) Does the Satco S29446 meet California Title 24?
Yes, it is California T24 listed, which matters if you are lighting a project in California under the Title 24 energy code. Note it is not DLC approved, so if your utility rebate program requires a DLC listing, this lamp will not qualify for it.
3) Will the Satco S29446 dim on my existing incandescent dimmers?
The lamp is dimmable. It runs on 120V at 60Hz and pulls 0.125A, so a full run of these draws very little current, which is worth checking against your dimmer's minimum load. Low-load LED-rated dimmers handle small quantities better than older incandescent controls.
4) Is this PAR38 lamp good enough for retail or hospitality color rendering?
CRI is 90, which is the threshold most retail, hospitality and healthcare specs call for when merchandise, skin tone or finishes have to read correctly. Paired with the 3000K warm white color temperature, it suits hotel lobbies, restaurants and showroom lighting.
5) Can I use the S29446 in a 3-way lamp socket or a color-tunable application?
No on both counts. It is not a three-way lamp, so in a 3-way socket it will only operate at its single output level, and it is not CCT selectable, so the color is fixed at 3000K warm white. If you need to match other fixtures at 4000K or 5000K, order that color temperature as a separate lamp.
6) How long will these PAR38 LEDs last before maintenance has to relamp?
Average rated life is 25,000 hours. On a 12-hour-a-day commercial schedule that is roughly five and a half years of service, which is why property managers standardize on them for high-ceiling and exterior locations where getting a lift out is the real cost.
7) What is the lens and housing on this Satco PAR38 made of?
The lens is clear thermoplastic (PBT) rather than glass, over a silver housing with a plastic base. The clear lens keeps the 40 degree flood beam defined, and the plastic construction means no glass shards if a lamp is dropped during relamping, which is a plus in kitchens and food service areas.
How fast can I get the Satco Lighting S29446 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29446 come with a warranty?
Absolutely. The Satco Lighting S29446 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29446?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29446 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.