SATCO Lighting S29618 3.5W LED Candle, 2700K, Candelabra Base, 120V
3.5 Watt LED Candle - 2700K - Candelabra base - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.029A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- B11
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 300L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Plastic
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- CRI:
- 90+
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 275
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 3.5W
- Product Weight:
- 0.07 lb
- Country of Origin:
- China
- Product Material:
- Plastic
Satco Lighting S29618 – Frequently Asked Questions
1) Will the Satco S29618 LED candle bulb fit a standard chandelier socket?
It uses a candelabra base (E12 size in common shorthand), which is the small screw socket used in most chandeliers, sconces and candle-style fixtures. The lamp shape is B11, the torpedo/candle profile. If your fixture takes a medium base, this is the wrong lamp.
2) Can I put the Satco S29618 candle lamp in an enclosed fixture?
Yes, it is an enclosed rated lamp, so sealed sconces, lanterns and closed chandelier globes are fine. It is also rated for damp locations, which covers covered porches and bathrooms, but not wet locations with direct water exposure. Burning position is universal, so base up, base down or sideways all work.
3) Does the Satco S29618 dim, and what wattage is it replacing?
The lamp is dimmable and draws 3.5 watts at 120 volts, 60 Hz, putting out 300 lumens as a 40W incandescent equivalent. Current draw is 0.029A, so a long chandelier run stays well inside a typical branch circuit. On dimmers, older incandescent-only dimmers can flicker at the bottom of the range with loads this small; an LED-rated dimmer is the safer pairing.
4) Will this LED candle match the warm color of the incandescent bulbs already in my chandelier?
At 2700K it reads the same warm white as a standard incandescent candle lamp, and the CRI is 90+, so skin tones and fabrics hold their color under it. For a property manager relamping a lobby or corridor, order the whole fixture at once so every socket sits at the same color temperature.
5) Does the Satco S29618 meet California Title 24 for a residential job?
Yes, it is listed as Title 24 compliant, which matters on California multi-family and residential work where high-efficacy lamps are required. It is also FCC compliant. It is not DLC listed, so if a commercial utility rebate requires a DLC-qualified product, this lamp will not qualify for it.
6) How long does this candelabra LED last before I have to relamp again?
Rated at 25,000 average hours. On a hallway or lobby chandelier running roughly 12 hours a day, that is several years between relamps, which is the reason most MRO buyers move candelabra sockets off incandescent. The base is plastic, not brass, so don't overtighten it into the socket.
7) Can I use the S29618 in a three-way candelabra socket?
No. This Satco LED candle is not a three-way lamp, so in a three-way socket it will run at a single output level regardless of switch position. For stepped output you need a lamp built for three-way operation; for smooth control, this one does dim on a compatible dimmer.
How fast can I get the Satco Lighting S29618 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29618 come with a warranty?
Absolutely. The Satco Lighting S29618 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29618?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29618 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.