You may also like
SATCO Lighting S9577 2.5W ST19 LED, Transparent Amber, Medium Base, 2000K, 220 Lumens, 120V
Model: SATCO-S9577
SATCO Lighting S9577 2.5W ST19 LED, Transparent Amber, Medium Base, 2000K, 220 Lumens, 120V2.5 Watt ST19 LED - Transparent Amber - Medium base - 2000K - 220 Lumens - 120 Volt
Satco Lighting
$7.07
SATCO Lighting S29806 2.5W LED Flame Bulb, T19, Medium Base, 120V
2.5 Watt LED Flame Bulb - T19 - Medium Base - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.021A
- Avg Rated Hours:
- 10000
- Burning Position:
- Base Up or Down
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 60
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- T19
- Lens Finish:
- Frost
- Lens Material:
- Plastic
- Lensed:
- Yes
- Lumens:
- 150L
- Operating Frequency:
- 60Hz
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 25W
- Location Rating:
- Damp
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Light Temperature:
- 1600K
- Product Category:
- Light Bulbs
- Product Wattage:
- 2.5W
Satco Lighting S29806 – Frequently Asked Questions
1) Can the Satco S29806 flame bulb be put on a dimmer?
No. The S29806 is a non-dimmable lamp, so it needs to run on a plain switched circuit. Put it on a dimmer and you risk flicker, buzz, or a short life. It also isn't a three-way lamp, so it won't step through levels in a three-way socket either.
2) Will a 2.5W LED flame bulb be bright enough to replace the 25W bulbs in my sconces?
Output is 150 lumens at 2.5 watts, which Satco rates as a 25W incandescent equivalent. That is decorative light, not task light. In a lobby sconce or a restaurant wall fixture where the flicker effect is the point, it reads right. If those sconces are the only light in a corridor, you'll want a higher-lumen lamp instead.
3) Can I use this flame bulb in a closed fixture or a covered outdoor lantern?
Yes on both counts. The lamp is enclosed rated, so a sealed or covered fixture won't cook it the way it would a non-rated LED. It carries a damp location rating and is listed for indoor or outdoor use, which covers a porch lantern or covered entry. It is not wet rated, so keep it out of direct rain and unsheltered exterior positions.
4) Does the bulb have to point up, or can I install it base up in a downward-facing fixture?
Either way. Burning position is base up or base down, so the S29806 works in a pendant, a wall sconce with the socket inverted, or an upward-facing chandelier arm without affecting rated life.
5) What color does a 1600K flame bulb actually look like?
Very warm and orange, well below the 2700K of a soft white incandescent. 1600K is candle-flame territory, which is the whole point of this lamp. CRI is 60, so colors of fabric, food, and finishes won't render accurately under it. Use it for effect and atmosphere, not as the light people work or read under.
6) How long will these last before maintenance has to relamp?
Rated average life is 10,000 hours. On a hospitality fixture running roughly 12 hours a night that's a bit over two years between changes. The lamp is fixed at 1600K with no selectable color temperature, so every replacement out of the same box matches the ones already installed.
7) Is the Satco flame bulb clear glass or frosted, and will you see the LED chips?
The lens is frosted plastic with a white housing, so the diodes are diffused rather than exposed. If your fixture is an open cage or a clear shade where the lamp itself is on display and you want a visible filament look, this frosted flame lamp gives a softer, glowing envelope instead.
8) Can I ship these to a job in California?
Yes. Satco marks the S29806 as lawful for sale in California, so it clears the state lamp efficiency rules that block some legacy bulbs. Note it is not DLC listed, so it won't qualify for utility rebate programs that require a DLC entry.
How fast can I get the Satco Lighting S29806 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29806 come with a warranty?
Absolutely. The Satco Lighting S29806 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29806?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29806 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.