SATCO Lighting S29816 15W, A19 LED, Frosted, 3000K, Medium Base, 220 degree Beam Angle, 120V

It puts out 1600 lumens at 15 watts. That is the lumen output of a 100 watt incandescent A19, so it is a one-for-one brightness replacement for a 100W bulb while drawing 15 watts. Useful where a property manager wants full output in lamps and fixtures without the heat and the energy draw.

Yes, the S29816 is a dimmable lamp. Keep in mind that LED lamps dim properly only on LED-compatible (or LED/CFL rated) dimmers; an old incandescent-only rotary or slide dimmer can cause flicker or limited dimming range. If you are relamping a dimmed circuit across a building, plan on verifying the dimmer type.

3000K is a soft/warm white, a touch crisper and whiter than the 2700K that matches old incandescent bulbs. It is the common pick for multi-family corridors, baths, kitchens and hospitality spaces where you want warmth without the yellow cast. If you are mixing bulbs into existing fixtures that currently run 2700K incandescent or LED, the difference is visible side by side, so standardize a space on one or the other.

The S29816 has a frosted envelope and a 220 degree beam angle, so light is diffused around and spread well past the sides of the lamp rather than throwing a narrow forward cone. That combination is what you want in open-shade table lamps, globes and bare-socket sconces where the bulb is visible, and it also keeps light on the ceiling in a surface fixture.

The S29816 is rated 80+ CRI, which is the standard tier for general lighting: corridors, stairwells, offices, back-of-house, apartment interiors, storage and MRO areas. It is adequate for anywhere color judgment is not part of the task. For retail display, cosmetics, art, or paint and finish matching, buyers typically spec a 90+ CRI lamp instead.

It is an A19 envelope, the same shape and nominal size class as the standard 100W incandescent A19, so clearance behaves the same way. LED A19 lamps are typically slightly shorter overall than an incandescent A19, so if the old bulb cleared the harp or shade, this one will. The lamp weighs 0.11 lb, so it is also lighter than the glass incandescent it replaces, which matters on clip-on shades and swing-arm lamps.

Order Satco part number S29816. It is sold in a single configuration: frosted finish, 15W A19 LED, 3000K, medium base, 120V. There is no clear-glass or alternate color temperature option under this part number, so if a job calls for 2700K or 4000K that is a different Satco number.