SATCO Lighting S49946 8W, 2 Foot LED T8, Medium Bi Pin Base, 3000K, 50000 Avg Rated Hours, 1250 Lumens, Type A, Ballast dependent
8 Watt - 2 Foot LED T8 - Medium Bi Pin base - 3000K - 50000 Average rated hours - 1250 Lumens - Type A - Ballast dependent
Manufacturer Resources
Product Specs
- Amps:
- 0.067-0.029A
- Avg Rated Hours:
- 50000
- Ballasting Requirements:
- Ballast required
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- T8
- Lens Finish:
- Gloss White
- Lens Material:
- Glass
- Lumens:
- 1250L
- Operating Frequency:
- 50/60Hz
- Product Type:
- Tube
- Three-Way:
- No
- Warranty:
- 5 Year Limited - T8 LED Bulbs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Bulb Base:
- Medium Bi Pin
- Base Material:
- Glass
- Incandescent Equivalent:
- 110W
- Location Rating:
- Damp
- CRI:
- 82
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-277V
- Beam Spread Angle:
- 210
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8W
- Product Material:
- Glass
- Product Length:
- 24 in
- Product Weight:
- 0.22 lb
- Department:
- Electrical
Satco Lighting S49946 – Frequently Asked Questions
1) Can I drop the Satco S49946 2-foot LED T8 straight into my existing fluorescent fixture without rewiring?
Yes. The S49946 is a Type A, ballast-dependent lamp, so it runs off the existing fluorescent ballast in the fixture. Pull the old F17T8, put this one in the medium bi-pin sockets, done. No rewiring, no ballast bypass. The trade-off: when that ballast eventually fails, the lamp stops working until the ballast is replaced or the fixture is converted.
2) Will this 2 foot LED T8 work in a fixture that has had the ballast removed or bypassed?
No. This 8W T8 needs a working fluorescent ballast to operate. If the fixture has been converted to direct line voltage at the sockets, you need a Type B ballast-bypass lamp instead. Check the fixture before ordering, since mixing the two types is the most common reason a retrofit lamp doesn't light.
3) Is 3000K the right color for matching the rest of my building's tubes?
The S49946 is fixed at 3000K, a warm white. It is not CCT selectable, so you cannot field-switch it to 3500K or 4000K. If the other openings in your building are running 4100K cool white fluorescents, this lamp will read noticeably warmer beside them. For a mixed-space retrofit, standardize on one color temperature across the whole run.
4) Will this 2 foot LED T8 physically fit a 24 inch fluorescent strip fixture?
Yes. The lamp is 24 inches long with medium bi-pin ends, the standard 2-foot T8 form factor, so it seats in the same sockets. It can be mounted in any burning position, so it works in surface strips, wraps, and troffers alike.
5) Does this Satco LED T8 qualify for utility rebates or California Title 24?
It is DLC approved, which is what most utility prescriptive rebate programs require for linear LED lamps, and it is listed as Title 24 compliant for California work. It is also FCC compliant. Those three are the ones institutional and government specs usually call out on a lamp submittal.
6) How much light does the Satco 8W 2-foot LED T8 put out compared to the fluorescent tube it replaces?
It delivers 1250 lumens at 8 watts, with a CRI of 82 and a 210 degree beam spread so it throws light around the fixture much like a fluorescent tube does. Satco rates it as a 110W incandescent equivalent. Rated life is 50,000 average hours.
7) Can I use the Satco S49946 LED T8 in a parking garage, cooler, or other damp area?
It carries a damp location rating and is listed for indoor use, so a covered damp space like a stairwell or garage interior is within rating. It is not rated for wet locations or direct exposure to weather. Note the lamp body is glass, so handle accordingly in high-traffic or impact-prone areas.
8) Is the Satco 8W LED T8 dimmable, and what voltage does it run on?
The lamp itself is listed as dimmable, but because it is ballast-dependent the dimming behavior is controlled by the fluorescent ballast it runs on, not by the lamp. It operates across 120V to 277V at 50/60Hz, drawing 0.067 to 0.029A depending on supply voltage, which covers both residential 120V circuits and 277V commercial lighting branch circuits.
How fast can I get the Satco Lighting S49946 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S49946 come with a warranty?
Absolutely. The Satco Lighting S49946 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S49946?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S49946 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.