SATCO Lighting S8003 6W, 90 Minute, 100-277V, LED Emergency Backup Driver, For use with 4/6/8 or 10in CDL
6 Watt - 90 Minute - 100-277 Volt - LED Emergency Backup Driver - For use with 4/6/8 or 10 Inch CDL
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Product Width:
- 3.3 in
- Product Length:
- 9.92 in
- Product Height:
- 1.69 in
Satco Lighting S8003 – Frequently Asked Questions
1) What does the Satco S8003 emergency backup driver actually do in a power outage?
The S8003 is an LED emergency backup driver. When normal power drops, it takes over the LED load and drives it at 6 watts for 90 minutes of run time, so the fixture keeps putting out light on the egress path. It is not a bulb or a fixture on its own, it is the backup driver that gets wired in with one.
2) Will the Satco S8003 work on a 277V commercial circuit?
Yes. The S8003 backup driver accepts 100-277 volts, so it covers both 120V residential-style branch circuits and the 277V lighting circuits common in commercial and institutional buildings. One part number covers both, which is useful if you are standardizing across a facility with mixed voltages.
3) Which Satco downlights is the S8003 emergency driver meant to be paired with?
Satco specifies the S8003 for use with 4, 6, 8 or 10 inch CDL commercial downlights. If your fixture is one of those four aperture sizes in that line, this is the matching backup driver. For a different fixture family, confirm the fixture is rated to accept this driver before you spec it.
4) Is 90 minutes of emergency run time enough for a code egress installation?
Ninety minutes is the run time the S8003 delivers, and 90 minutes is the standard duration life safety codes call for on emergency egress lighting. Confirm the requirement with your AHJ for the occupancy, but the 90 minute figure is what this driver is built around.
5) Does the S8003 put out full fixture brightness during an outage?
No. The driver runs the LED at 6 watts in emergency mode, which is a reduced output compared to what the downlight draws on normal power. That is normal for a backup driver, the goal is enough light to find the exit for 90 minutes, not full illumination.
6) What part number do I order for the Satco emergency backup driver for CDL downlights?
Order Satco S8003. It is a single configuration, no finish or size choices to specify, and the manufacturer part number and the ordering number are the same.
How fast can I get the Satco Lighting S8003 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8003 come with a warranty?
Absolutely. The Satco Lighting S8003 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8003?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8003 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.