You may also like
SATCO Lighting S8601 3W, JC LED, 3000K, G6.35 Base, Carded, 12V AC/DC, Carded
3W - JC LED - 3000K - G6.35 base - Carded - 12 Volt AC/DC - Carded
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
Satco Lighting S8601 – Frequently Asked Questions
1) Will the Satco S8601 fit a G6.35 bi-pin socket in a 12V halogen fixture?
Yes. The S8601 is a 3W JC LED lamp on a G6.35 base running on 12 volts AC or DC, which is the same base and voltage class used by the 12V JC halogen capsules found in landscape fixtures, under-cabinet strips, desk lamps and display lighting. The pins press straight into the existing socket. What it will not do is run on line voltage: the fixture still needs its 12V transformer or driver in the circuit.
2) Can I wire a 12V G6.35 LED bulb like the Satco S8601 straight to 120V house power?
No. The S8601 runs on 12 volts, AC or DC, so it has to sit downstream of a transformer or LED driver. Wiring a 12V bi-pin lamp to 120V line voltage destroys it immediately. If your socket is fed at line voltage, you need a line-voltage lamp instead, not this one.
3) What color light does the Satco S8601 3W JC LED put out, and will it match my existing halogen bulbs?
3000K, which reads as a warm white. That is a little cooler and cleaner than the 2700K to 2900K most 12V halogen capsules produce, so in a run of fixtures where you swap only some lamps you will usually see the difference. On a fleet of fixtures, change them all at once and they read consistently.
4) How much power does the Satco S8601 draw, and what does that do to my 12V transformer load?
3 watts per lamp. Replacing 10W or 20W JC halogens with these drops the load on the 12V transformer sharply, which is good for the transformer but worth checking on magnetic transformers that need a minimum load to operate. On an electronic 12V supply, confirm it is rated for LED loads before you strip the circuit down to a few watts.
5) Is the Satco S8601 a clear bulb or frosted?
Clear. The capsule is unfrosted, so it throws a harder, more directional light with visible source sparkle, which is what you want behind a reflector, in a display case or in an optic that does the beam shaping. In a bare open fixture at eye level a clear lamp shows glare.
6) Does the Satco S8601 come single or in a bulk pack for a facility relamp?
It ships carded, meaning individually blister-packed for retail-style handling rather than bulk-boxed. For a multi-fixture relamp across a property, order the quantity you need in carded units.
7) What part number do I order for the Satco 3W 12V G6.35 LED capsule?
Satco S8601 is the manufacturer part number for the 3W JC LED, 3000K, G6.35 base, 12V AC/DC lamp in clear. That is the number to quote for a repeat order or a distributor line item.
How fast can I get the Satco Lighting S8601 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8601 come with a warranty?
Absolutely. The Satco Lighting S8601 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8601?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8601 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.