You may also like
SATCO Lighting S8950 2.8W, B11 LED, 3000K, Candelabra Base, 120V
2.8 Watt - B11 LED - 3000K - Candelabra base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.023A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S9618
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- B11
- Lens Finish:
- Clear
- Lens Material:
- Plastic (PS)
- Lensed:
- Yes
- Lumens:
- 160L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Metal / Plastic
- Incandescent Equivalent:
- 25W
- Location Rating:
- Damp
- CRI:
- 80
- Title 20:
- No
- Subcategory:
- LED
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 275
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 2.8W
Satco Lighting S8950 – Frequently Asked Questions
1) Will the Satco S8950 B11 LED candle bulb replace a 25W incandescent candelabra lamp?
Yes. The S8950 is a 2.8 watt LED rated as a 25 watt incandescent equivalent, putting out 160 lumens at 3000K on 120 volts. It uses the same candelabra (E12) screw base as the small incandescent chandelier lamps it replaces, so it drops straight into the existing socket.
2) Can I put this LED candelabra bulb in an enclosed fixture or a closed glass sconce?
Yes, the S8950 is an enclosed rated lamp, so sealed sconces, hurricane shades and closed ceiling fixtures are fair game. It also carries a damp location rating, which covers a covered porch or a bathroom vanity, but not direct exposure to weather. It can be burned in any orientation, base up or base down.
3) Is the Satco S8950 dimmable on a standard wall dimmer?
The 2.8W B11 lamp is dimmable. It is a single fixed color temperature lamp at 3000K, not CCT selectable, and it is not a three-way bulb, so on a three-way socket it will run at full output only. With a draw of 0.023 amps at 120V/60Hz you can load a lot of them on one dimmer circuit, but use an LED-rated dimmer for smooth low-end performance.
4) Can I use this Satco bulb on a California Title 20 job?
No. The S8950 is not a Title 20 compliant lamp. Satco lists S9618 as the California Title 20 alternate substitute, so specify that model for California installations where Title 20 applies.
5) Will a clear B11 LED look right in an open chandelier where the bulb is visible?
The S8950 has a clear plastic (PS) lens, so the lamp body stays transparent like a traditional chandelier candle rather than looking like a white frosted tube. Light spreads through 275 degrees, close to omnidirectional, which is what you want in an exposed chandelier or candelabra where the bulb throws light up and out. At 3000K it reads warm white rather than the yellower incandescent tone.
6) Is this candelabra LED bright enough for a hotel corridor sconce or hallway fixture?
At 160 lumens each, the S8950 is a decorative-output lamp, matching a 25W incandescent candle. In a multi-lamp chandelier or a pair of sconces that is usually plenty for ambience and wayfinding, but it is not a task-light replacement for a 40W or 60W candle. If your existing lamps are 40W incandescent, step up to a higher lumen B11 rather than this one.
7) Does this Satco LED candle qualify for a DesignLights Consortium utility rebate?
No. The S8950 is not DLC approved, so it will not qualify under DLC-based utility rebate programs. It is FCC compliant for radio frequency emissions, which matters where lamps sit near AV or wireless equipment.
8) What is the S8950 bulb body and base made of?
The base is metal and plastic, and the lens is polystyrene plastic rather than glass. That means it is less prone to breakage during relamping on a lift or ladder, but it also means you should not run it in a fixture that puts the lamp under high heat beyond its enclosed rating.
How fast can I get the Satco Lighting S8950 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8950 come with a warranty?
Absolutely. The Satco Lighting S8950 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8950?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8950 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.