You may also like
SATCO Lighting S9150 1.4W LED, A15, Clear, 2700K, Medium Base, 120V, Carded
1.4 Watt LED - A15 - Clear - 2700K - Medium base - 120 Volt - Carded
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.012A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A15
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 36L
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 15W
- Location Rating:
- Wet
- Base Material:
- Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 1.4W
Satco Lighting S9150 – Frequently Asked Questions
1) Can the Satco S9150 A15 LED bulb be used on a dimmer switch?
No. The S9150 is a non-dimmable lamp. Put it on a dimmer circuit and you can expect flicker, buzz, or no light at the low end, plus shortened life. If the fixture is on a dimmer, either swap the switch to a standard toggle or specify a dimmable A15 LED instead.
2) Will a 1.4W LED A15 bulb be bright enough to replace the 15W incandescent in my appliance or accent fixture?
It matches a 15 watt incandescent, putting out 36 lumens at 2700K warm white with a 360 degree spread. That is low-output by design, the kind of light used in appliance fixtures, night lights, decorative sconces and sign cans, not general room lighting. If you need usable task light, step up to a higher lumen lamp.
3) Can this A15 LED go in an outdoor fixture or a damp bathroom?
Yes. The S9150 carries a wet location rating and is listed for indoor or outdoor use, so covered porch fixtures, exterior sconces, and bathrooms are all fair game. It also burns in any position, base up, base down, or horizontal, so pendant and wall-mount orientations are not a problem.
4) Is the Satco S9150 a clear bulb or frosted, and will the filament show?
Clear lens, so the LED elements are visible through the glass the way a clear incandescent shows its filament. That suits exposed-bulb fixtures and decorative applications where you want sparkle. For a soft, even glow with no visible source, choose a frosted A15 instead.
5) How does 2700K compare to the bulbs already in my building, and will the color match?
2700K is warm white, the same color as a standard soft white incandescent, so it blends with existing incandescent or 2700K LED lamps in the same room. Color temperature is fixed, not selectable, and CRI is 80. If your other fixtures run 3000K or 4000K, this one will read noticeably warmer side by side.
6) How long does the Satco S9150 last and how much current does it draw?
Rated 25,000 hours with a draw of 0.012 amps at 120 volts. At that current you can load a lot of these on one circuit, which matters on sign cabinets or long runs of decorative sockets where a string of 15W incandescents would have been the limiting factor.
7) Will this LED work in a three-way lamp socket?
No. The S9150 is not a three-way lamp. Screwed into a three-way socket it will run at a single output level on whichever contacts energize, and some positions may give no light at all. For three-way table lamps you need a lamp specifically built with the three-way contact.
8) Is this Satco A15 LED approved for DesignLights Consortium utility rebates?
No, the S9150 is not DLC approved, so it will not qualify for rebate programs that require a DLC listing. It is FCC compliant and noted as lawful for sale in California.
9) How is the Satco S9150 packaged for a maintenance shop or retail counter?
It ships carded, meaning individually blister-carded rather than bulk in a sleeve. That works for a parts counter or a tech's truck stock where bulbs get handed out one at a time; for a full relamp of dozens of fixtures, bulk packaging is the cheaper handling option.
How fast can I get the Satco Lighting S9150 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9150 come with a warranty?
Absolutely. The Satco Lighting S9150 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9150?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9150 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.