You may also like
SATCO Lighting S9162 1.2W LED, S11, Ceramic Blue, Medium Base, 120V, Carded
1.2 Watt LED - S11 - Ceramic Blue - Medium base - 120 Volt - Carded
Manufacturer Resources
Product Specs
- Amps:
- 0.010A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- S11
- Lens Finish:
- Ceramic Blue
- Lensed:
- Yes
- Product Type:
- Sign
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 10W
- Location Rating:
- Wet
- Base Material:
- Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Product Category:
- Light Bulbs
- Product Wattage:
- 1.2W
Satco Lighting S9162 – Frequently Asked Questions
1) Can the SATCO S9162 blue S11 sign bulb be used outdoors in an exposed fixture?
Yes. The S9162 is rated for wet locations and listed for both indoor and outdoor use, so it holds up in exposed sign cabinets, marquee sockets, and porch or canopy fixtures that take rain. It also burns in any position, so a socket that points sideways or down is fine.
2) Can I put the SATCO S9162 on a dimmer or a three-way socket?
No on both counts. The S9162 is not dimmable and is not a three-way lamp. On a dimmer circuit expect flicker, buzz, or no start at all, and in a three-way socket it will run at one output regardless of switch position. If the sign or marquee circuit is on a dimmer, either bypass the dimmer for that branch or spec a lamp listed as dimmable.
3) What incandescent sign bulb does the 1.2W S9162 LED replace?
It replaces a 10 watt incandescent S11 sign lamp while drawing 1.2 watts. For a property manager relamping a marquee or exit sign band, that is the same light output from roughly a tenth of the load, and at 0.010A per lamp you can put a lot of them on one circuit without approaching the breaker.
4) Is the blue on this SATCO sign bulb a coating that fades, or is the color in the glass?
The color is a ceramic blue finish over a glass body, not a dipped or sprayed lacquer that chalks off. That matters on outdoor signage where a painted lamp goes washed-out within a season. The lamp is lensed, so the blue is diffused across the whole envelope rather than coming from a bare colored emitter.
5) How long will these blue LED sign lamps last before I have to relamp the sign again?
Rated at 25,000 hours. Run continuously that is nearly three years; on a dusk-to-dawn sign at about 12 hours a day it is closer to five or six. For a facility with lamps behind a locked marquee panel or up on a lift, that is the number that decides whether the relamp is a one-time job or an annual one.
6) Does this blue S11 bulb light up all the way around, or does it throw light in one direction?
Full 360 degree output. Unlike a directional LED with a heat sink blocking half the envelope, the S9162 lights evenly in every direction, which is what you want inside a sign cabinet or a globe where the lamp is seen from multiple angles and any dark side shows.
7) Is the SATCO S9162 a DLC listed lamp for a utility rebate?
No, the S9162 is not DLC approved. Decorative and sign lamps at this wattage generally fall outside DLC's qualified categories, so if the job depends on a DLC listing for a utility incentive, this lamp will not carry the paperwork. It is legal for sale in California.
8) Will these LED sign bulbs cause interference with nearby electronics or a sound system?
The S9162 is FCC compliant, so the electronics inside meet the limits for radiated and conducted emissions. That is the check that matters when sign lamps sit near audio gear, radio equipment, or an AV rack, since cheap unfiltered LED drivers are a known source of buzz on those systems.
9) How does the SATCO S9162 come packaged for a multi-lamp relamp order?
Each S9162 ships carded, meaning a single lamp in retail blister packaging rather than a bulk sleeve or case pack. Ordering for a full sign or a building fleet means ordering by the piece.
10) Does this blue sign bulb come in other colors or a selectable white?
Ceramic Blue is the only finish on the S9162, and it is a fixed color, not a tunable lamp; CCT selection does not apply. If the sign needs a different color in the same S11 medium base body, that is a different SATCO part number rather than an option on this one.
How fast can I get the Satco Lighting S9162 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9162 come with a warranty?
Absolutely. The Satco Lighting S9162 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9162?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9162 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.