SATCO Lighting S9317 3 Watt/9 Watt/12W, A19 LED, 3-way, Frosted, 3000K, Medium Base, 220 degree Beam Angle, 120V
3 Watt/9 Watt/12 Watt - A19 LED - 3-way - Frosted - 3000K - Medium base - 220 deg. Beam Angle - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.025/0.075/0.100A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S8571
- CA Web Text:
- Non-Compliant
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- A19
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 280L/950L/1200L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- Yes
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 30W/70W/100W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 220
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 3W/9W/12W
- Product Weight:
- 0.12 lb
- Department:
- Electrical
Satco Lighting S9317 – Frequently Asked Questions
1) Can I put this Satco 3-way LED on a dimmer switch?
No. The S9317 is not dimmable. Stepping the light is done through the 3-way socket, not a dimmer, and putting it on a TRIAC wall dimmer risks flicker or buzz. If the fixture is on a dimmer, pick a dimmable A19 instead.
2) Can this bulb go in a fully enclosed ceiling fixture or a jar-style flush mount?
Yes, it is an enclosed rated lamp, so a sealed globe or jar fixture that traps heat is fine. It also carries a damp location rating and a universal burning position, so base-up, base-down or horizontal all work, including a covered porch or bath. Damp is not wet, so keep it out of anything exposed to direct rain.
3) What color will the light look next to the other bulbs in my units?
3000K, a soft warm white that reads slightly warmer than neutral and a bit crisper than a classic 2700K incandescent. CRI is 80. The lens is frosted white, so the output is diffused rather than a visible point source, with a wide 220 degree beam spread for general room lighting from a table or floor lamp.
4) How long does this 3-way LED last compared to the incandescent it replaces?
Rated 25,000 average hours. On a lamp burning around four hours a night that is roughly 17 years of service, which is the case for swapping out 3-way incandescents in guest rooms, lobbies and apartment fixtures where relamping labor costs more than the bulb.
5) Is the Satco S9317 rated for outdoor use?
It is listed as an indoor lamp with a damp location rating. That covers covered, protected spots like a porch ceiling or a bathroom, but not open exposure to weather. For an unprotected outdoor fixture you need a wet location rated lamp.
6) Is this a fixed 3000K or can the color temperature be switched?
Fixed. The S9317 is not CCT selectable, so every bulb is 3000K out of the box. For a property standardizing on one color across lamps, that consistency is the point, but you cannot field-change it to 2700K or 4000K.
7) Will this LED cause interference with radios or other electronics in the room?
The S9317 is FCC compliant, which addresses the radio frequency emissions from its driver. It runs on 120V, 60Hz line power.
8) Does this bulb qualify for a DesignLights Consortium utility rebate?
No, it is not DLC approved, so it will not qualify under DLC-based rebate programs. If a rebate is driving the spec on a commercial retrofit, verify the program's qualified products list before committing to a bulb.
How fast can I get the Satco Lighting S9317 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9317 come with a warranty?
Absolutely. The Satco Lighting S9317 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9317?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9317 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.