Schaub 1206 Modo Collection Re...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$77.00
$51.05
Schaub 1206 2" x 6-1/4" Modo Recessed Pulls Schaub 1206

Schaub 1206 Modo Collection Recessed Cabinet Pull, 2" x 6-1/4", Zinc, Low-Profile 5/8" Projection

(No reviews yet) Write a Review

Model: 1206-GM
From the MODO Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$77.00
$51.05
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 1206 Modo Collection Recessed Cabinet Pull, 2" x 6-1/4", Zinc, Low-Profile 5/8" Projection

The Schaub 1206 Modo Collection Recessed Cabinet Pull brings a clean, contemporary profile to kitchen and bath cabinetry with an overall length of 6-1/4" and a compact 5/8" projection that keeps the pull nearly flush to the mounting surface. Cast from solid zinc, this recessed pull features a 6-1/8" base dimension for precise mounting and ships with 2 break-off screws sized M4x12 to accommodate varying door and drawer thicknesses. As part of the Modo Collection, the 1206 pull delivers a streamlined, minimalist look suited to modern cabinetry designs.

Key Features

  • Overall Length: 6-1/4" overall dimension provides a substantial grip surface for cabinet doors and drawers.
  • Base Dimension: 6-1/8" base dimension ensures accurate alignment during installation.
  • Low-Profile Projection: 5/8" projection keeps the pull recessed close to the cabinet surface for a streamlined, contemporary appearance.
  • Solid Zinc Construction: Solid zinc base material offers long-lasting strength and a refined finish for everyday cabinet use.
  • Contemporary Style: Part of the Modo Collection, designed with clean lines to complement modern cabinetry and furniture.
  • Recessed Pull Function: Purpose-built recessed design minimizes protrusion, reducing snag points in high-traffic kitchens and baths.
  • Mounting Hardware: Includes 2 break-off screws (M4x12) that can be trimmed to fit various door and drawer thicknesses.

Certifications & Compliance

  • California Proposition 65 Warning applies to this product; California residents should review manufacturer disclosure documentation.

Technical Specifications

  • MAP Policy: Yes
  • Thread / Screw Size: 2 X Break-Off Screws M4x12

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Closet and Storage Systems
  • Custom Furniture
  • Commercial Millwork
  • Office Cabinetry
  • Retail Display Fixtures

Why Schaub 1206?

Schaub cabinet hardware is built from solid zinc for consistent weight and durability, with precise base and projection dimensions engineered for reliable, repeatable installation. The Modo Collection's contemporary design and recessed function make the 1206 pull a dependable choice for cabinetry projects demanding clean, understated hardware. Backed by consistent manufacturing standards, this recessed pull is well suited for professional installers and cabinetry specifiers seeking clean, repeatable results across multiple units.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
MODO
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
6-1/4"
Thread / Screw Size:
2 X Break-Off Screws M4x12
Product Function:
Recessed Pull
Product Dimension:
6-1/8"
Product Projection:
5/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
Department:
Door Hardware

Schaub 1206-GM – Frequently Asked Questions

1) Does the Schaub 1206 Modo recessed pull need a routed pocket in the cabinet door, or does it surface mount?
The 1206 Modo is a recessed pull, so it seats into the door or drawer front rather than standing off it. Projection is 5/8 inch, which is how far the pull body sits off the mounting surface, and the base dimension is 6-1/8 inch against a 6-1/4 inch overall length. Plan your millwork opening off the 6-1/8 inch base, not the overall.
2) What screws come with the Schaub 1206 pull, and will they fit a 3/4 inch drawer front?
Two break-off screws, M4 x 12, ship with each 1206 pull. Break-off screws are meant to be snapped to length, so a range of door and drawer front thicknesses is covered without ordering separate screw lengths. If your millwork is thicker than the M4x12 can reach, you will need longer M4 machine screws sourced separately.
3) Is a recessed pull the right choice for a busy kitchen, or should I use a bar pull?
A recessed pull like the Schaub 1206 keeps the grip nearly flush, with only 5/8 inch of projection, so there is little to catch aprons, pockets or passing traffic in a tight galley or a commercial millwork run. If you want a pull you can hook a full hand around, a projecting bar pull is the better grip: the Omnia 1970 projects 1-1/4 inch and the Omnia 1969 and 1971 project 1-3/16 inch. Both approaches mount to cabinetry, but the bar pulls surface mount rather than sitting into a recess.
4) What is a surface-mounted alternative to the Schaub 1206 Modo recessed pull for a contemporary kitchen?
The Schaub 1206 Modo is a recessed pull with a 5/8 inch projection that sits nearly flush to the cabinet face. If the design calls for a pull you grip away from the surface instead, the Deltana SBP35 is a modern square bar pull in solid brass at 3-1/2 inches, and the Omnia 1968/102 is a forged solid brass modern pull with 4 inch center-to-center spacing. Both are gripped from the front rather than recessed into the door or drawer.
5) I need more projection for gloved or accessible grip than the Schaub 1206 offers - what else works?
The Schaub 1206 Modo is deliberately low profile at 5/8 inch projection. Where a deeper finger clearance is wanted, the Omnia 1970 is a forged solid brass modern pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 are forged solid brass modern pulls at 1-3/16 inch projection.
6) My drawer fronts are drilled for 3 inch or 4 inch center-to-center pulls - will the Schaub 1206 drop into those holes?
No. The Schaub 1206 Modo is a recessed pull with a 6-1/8 inch base dimension and its own two-screw M4x12 pattern, not a standard center-to-center bore pattern. To reuse existing 3 inch holes, the Trimco 553 Series is a 3 inch center-to-center drawer pull; for 3-1/2 inch, 4 inch or 96mm holes, the Trimco 562 Series covers those spacings, and the Omnia 1968/102 is a 4 inch center-to-center pull.
7) What finishes does the Schaub 1206 Modo pull come in?
Two: Gun Metal (GM) and Matte Black (MB). Both are dark contemporary tones, so if you are matching existing hardware in a satin nickel or brass palette, the 1206 will not blend in.
8) What is the Schaub 1206 pull made of, and will it hold up on rental or commercial cabinetry?
Cast zinc. That gives it the weight and rigidity of a solid metal pull for kitchen, vanity, closet and commercial millwork use. If your spec calls specifically for solid brass, look at the Deltana SBP35 square bar pull or the Omnia 1968/102, both forged or solid brass, though those are projecting bar pulls rather than recessed.
9) For commercial millwork, is there a heavier-duty drawer pull than the zinc Schaub 1206?
The Schaub 1206 is cast zinc and is used in kitchen, bath, closet and commercial millwork cabinetry. For a steel or brass alternative on the same kind of work, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Trimco 553 Series drawer pull is offered at 3 inch center-to-center with the Trimco 562 Series in 3-1/2 inch, 4 inch and 96mm center-to-center.
10) Can I match the Schaub 1206 with other Schaub-designed hardware on the same job?
The 1206 belongs to Schaub's Modo Collection, a contemporary line with clean straight lines. For knobs and projecting pulls drawn from the same design house, Emtek carries Schaub Collection pieces including the Emtek 8405 Select, the Alexander, the Art Deco and the Bar cabinet pulls. Finish naming differs between lines, so match visually rather than by code.
11) What should I use on drawers if I want a traditional or period look instead of the Modo 1206?
The Schaub 1206 is a contemporary-style recessed pull. For a different design vocabulary on the same cabinetry, the Emtek Art Deco cabinet pull and the Emtek Alexander cabinet pull are both cabinet knob/pull styles in the Schaub Collection, and the Emtek Bar cabinet pull covers the plain bar form.
How fast can I get the Schaub 1206-GM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 1206-GM come with a warranty?
Absolutely. The Schaub 1206-GM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 1206-GM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 1206-GM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!