Schaub 1209 Modo Cabinet Pull,...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.00
$17.23
Schaub 1209 48 mm Center to Center Modo Cabinet Pulls Schaub 1209

Schaub 1209 Modo Cabinet Pull, 48 mm Center-to-Center Spacing, Zinc Construction

(No reviews yet) Write a Review

Model: 1209-GM
From the MODO Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.00
$17.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 1209 Modo Cabinet Pull, 48 mm Center-to-Center Spacing, Zinc Construction

The Schaub 1209 Modo Cabinet Pull brings contemporary design to kitchen and bath cabinetry from the Modo collection. Built from solid zinc, this pull measures 3-1/4" x 1-3/8" overall with 48 mm center-to-center screw spacing and a 5/8" projection for a comfortable, secure grip. The 3/8" base dimension keeps the profile streamlined, while two included break-off screws, M4x45, simplify installation across varying door and drawer thicknesses.

Key Features

  • Overall Dimensions: Measures 3-1/4" x 1-3/8" overall, suited to a wide range of cabinet and drawer sizes.
  • Center-to-Center Spacing: 48 mm mounting spacing simplifies installation and replacement on standard cabinetry.
  • Comfortable Projection: 5/8" projection provides ample clearance for a secure, comfortable grip.
  • Compact Base: 3/8" base dimension keeps the hardware profile low and unobtrusive against the door or drawer face.
  • Solid Zinc Construction: Solid zinc base material delivers long-term durability and a substantial feel for everyday cabinet use.
  • Contemporary Modo Design: Part of the Modo collection, featuring clean contemporary lines that complement modern kitchen and bath cabinetry.
  • Included Mounting Hardware: Includes 2 x break-off screws, M4x45, allowing installers to snap screws to the correct length for varying door and drawer thicknesses.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents; refer to Schaub product stewardship documentation for details.

Technical Specifications

  • Style: Contemporary
  • Collection: Modo
  • Function: Cabinet Pull
  • Projection: 5/8"
  • Base Material: Zinc
  • Base Dimensions: 3/8"
  • Overall Dimensions: 3-1/4" x 1-3/8"
  • Center to Center: 48 mm
  • Thread / Screw Size: 2 x Break-Off Screws M4x45
  • Product Group: Cabinet Hardware
  • Product Category: Cabinet Hardware
  • Department: Door Hardware
  • MAP Policy: Yes

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture
  • Residential Remodeling Projects
  • Commercial Cabinetry Installations
  • Built-In Storage and Closet Systems
  • Multi-Tenant Residential Properties

Why Schaub 1209?

Schaub Modo cabinet pulls combine solid zinc construction with contemporary styling for hardware that looks refined and holds up to daily kitchen and bath use. Precise 48 mm center-to-center spacing and included break-off M4x45 screws make installation straightforward across a variety of cabinet and drawer thicknesses. For homeowners and professionals seeking dependable, design-forward cabinet hardware, this Modo pull delivers consistent quality tailored to everyday residential and light commercial applications.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
MODO
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
3-1/4" x 1-3/8"
Thread / Screw Size:
2 X Break-Off Screws M4x45
Product Function:
Cabinet Pull
Product Dimension:
3/8"
Product Projection:
5/8"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
48 mm
Department:
Door Hardware

Schaub 1209-GM – Frequently Asked Questions

1) Do the Schaub Modo 1209 pulls come with screws, and will they work on thick drawer fronts?
Two break-off screws, M4 x 45, ship with each pull. Break-off means you snap the screw at the right length for the drawer front or door slab you are mounting to, so a single screw covers a range of thicknesses without hunting for a different length.
2) What is a solid brass alternative to the Schaub 1209 Modo cabinet pull?
The Schaub 1209 Modo pull is built from zinc with a 5/8 inch projection. If a solid brass body is required for the job, the Omnia 1968/102 is a forged solid brass modern cabinet pull with 4 inch center-to-center spacing, and the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch. Both are brass rather than zinc, and both use wider mounting spacing than the 48 mm centers on the 1209, so drawer fronts drilled for the Schaub would need new holes.
3) I need a deeper grip than the Schaub 1209 Modo pull gives - what should I use instead?
The 1209 Modo projects 5/8 inch off the cabinet face, which keeps the profile low. For more hand clearance, the Omnia 1970 modern cabinet pull carries a 1-1/4 inch projection and the Omnia 1969 and Omnia 1971 both carry a 1-3/16 inch projection, all in forged solid brass. Those stand roughly twice as far off the door, which matters on drawers pulled with a full hand or with gloves on.
4) Is an Orca Bachelor or Blackcomb knob a substitute for the Schaub 1209 Modo pull?
No, they are a different mounting type. The 1209 Modo is a two-hole pull on 48 mm center-to-center spacing supplied with two break-off M4x45 screws. The Orca CK-15030 and CK-16030 Bachelor round knobs at 1-1/4 inch diameter and the CK-17025 Blackcomb square knob at 25 mm are single-screw cabinet knobs, so they mount on one hole and would leave the second hole from a 1209 exposed. Choose a knob only where you are drilling fresh doors.
5) How far does the Schaub 1209 cabinet pull stand off the cabinet face?
Projection is 5/8 inch, with a 3/8 inch base dimension against the door or drawer face. That is enough finger clearance for a normal grip while keeping the pull tight to the face, which matters in a galley kitchen or a narrow hallway of built-ins where a deeper pull catches clothing.
6) What finishes does the Schaub 1209 Modo pull come in?
Four finishes: Gun Metal, Matte Black, Polished Rose Gold, and Signature Satin Brass. If you are standardizing an apartment turn or a whole kitchen, order all the pulls in one batch, since finish lots on brass and rose gold tones can vary between runs.
7) Can I get the same Schaub look from Emtek?
Yes. Emtek carries the Schaub Collection, which includes the Emtek 8405 Select cabinet pulls as well as the Alexander, Art Deco, and Bar cabinet pulls. Those are catalogued as cabinet knob/pull and cover several design series, so if you want to keep a Schaub-designed look across a kitchen while mixing knobs and pulls, that family is the place to match. The 1209 itself is from the Modo collection in a contemporary style.
8) What holds up better than the Schaub 1209 Modo pull in a high-traffic commercial or multi-tenant install?
The 1209 Modo is a zinc pull sized at 3-1/4 by 1-3/8 inches overall, aimed at kitchen and bath cabinetry. For heavier institutional duty, the Trimco 553 series drawer pull at 3 inch centers and the Trimco 562 series, offered in 3-1/2 inch, 4 inch, and 96 mm center-to-center, are the commercial-grade drawer pull option. The Orca CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel. Note that none of those share the 48 mm centers of the 1209, so swapping means redrilling.
9) I have Schaub pulls elsewhere in the building. What matches the Modo if I need a different style?
Schaub designs are also carried under the Emtek Schaub Collection, which includes the Alexander, Art Deco, and Bar cabinet pulls plus the Emtek 8405 Select line. Those give you other profiles from the same design house when you want to vary a butler pantry or vanity while staying in the family.
10) Should I use a pull or a knob on cabinet doors in a rental unit?
A two-hole pull like the Schaub 1209 Modo, at 48 mm centers, resists spinning loose and gives a full-hand grip, which holds up better under tenant traffic than a single-screw knob. Knobs are the simpler swap if the doors are already bored for one hole. For knob work we carry the Orca Bachelor Collection round knobs at 1-1/4 inch diameter and the Blackcomb square knob at 25 mm.
How fast can I get the Schaub 1209-GM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 1209-GM come with a warranty?
Absolutely. The Schaub 1209-GM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 1209-GM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 1209-GM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!