Schaub 20016 Quadrato Contempo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$30.00
$19.78
Schaub 20016 6-5/16" Center to Center Quadrato Wide Cabinet Pull Signature

Schaub 20016 Quadrato Contemporary Cabinet Pull, 6-5/16" Center to Center, Zinc Construction

(No reviews yet) Write a Review

Model: 20016-GM
From the Quadrato Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$30.00
$19.78
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 20016 Quadrato Contemporary Cabinet Pull, 6-5/16" Center to Center, Zinc Construction

The Schaub 20016 Quadrato Cabinet Pull is a contemporary-style pull from the Quadrato Signature collection, engineered for wide cabinet drawers and doors. Built from durable zinc, this pull offers a 6-5/16" (160 mm) center to center mounting spacing, a 6-3/4" overall length, and a 15/16" projection from the mounting surface. The base measures 5/16" and the pull is sized for M4 thread screws, making it a versatile option for cabinetry professionals and homeowners upgrading kitchen, bath, or furniture hardware.

Key Features

  • Center to Center Spacing: 6-5/16" (160 mm) center to center mounting for accurate alignment on wide cabinet drawers and doors.
  • Overall Length: 6-3/4" overall pull length suited to wide-stile cabinetry applications.
  • Comfortable Projection: 15/16" projection from the mounting surface provides a comfortable, secure grip.
  • Low-Profile Base: 5/16" base dimension keeps the mounting footprint slim against the cabinet surface.
  • Durable Zinc Construction: Solid zinc base material delivers long-lasting strength and a substantial feel for everyday cabinet use.
  • Standard Thread Sizing: M4 thread / screw size ensures straightforward installation with standard mounting hardware.
  • Contemporary Quadrato Design: Clean, contemporary styling from the Quadrato collection within the Schaub Signature line complements modern cabinetry.

Certifications & Compliance

  • California Proposition 65 Warning applies for California residents; refer to manufacturer product stewardship information.

Technical Specifications

  • MAP Policy: Yes
  • Thread / Screw Size: M4
  • Overall: 6-3/4"
  • Product Projection: 15/16"
  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Custom Furniture Cabinetry
  • Commercial Millwork Projects
  • Residential Remodels
  • Closet and Storage Systems
  • Builder and Contractor Installations

Why Schaub Quadrato?

Schaub Quadrato cabinet pulls combine durable zinc construction with precise, consistent 6-5/16" center to center spacing and M4 thread sizing for dependable, professional-grade installation. As part of the Schaub Signature collection, the Quadrato design brings a clean, contemporary look to kitchen, bath, and furniture cabinetry while standing up to everyday use across residential and commercial millwork projects.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Quadrato
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
6-3/4"
Thread / Screw Size:
M4
Product Function:
Cabinet Pull
Product Dimension:
5/16"
Product Projection:
15/16"
Product Style:
Contemporary
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
160 mm
Department:
Door Hardware

Schaub 20016-GM – Frequently Asked Questions

1) What screws does the Schaub Quadrato 20016 cabinet pull take, and will standard cabinet screws work?
The Quadrato 20016 is tapped for M4 machine screws, the metric standard on cabinet hardware. If your drawer fronts are thicker than the screws that come in the box (thick slab fronts, or a front plus an applied panel), order longer M4 screws rather than trying to force an 8-32. M4 and 8-32 are close in diameter but the threads are not interchangeable and cross-threading a zinc pull ruins it.
2) What is a good alternative to the Schaub 20016 Quadrato pull if I want solid brass instead of zinc?
The Schaub 20016 Quadrato is built from zinc in a contemporary style. If the specification calls for solid brass, the Omnia 1969 Modern Cabinet Pull is forged solid brass, and the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass square bar pull. Both are modern-profile pulls, so the visual family stays close while the base material changes to brass.
3) Is the Emtek 8405 Select cabinet pull the same thing as the Schaub 20016?
They are related but not interchangeable. The Emtek 8405 is part of the Emtek SELECT series and is carried under the Schaub collection, and it is catalogued as a cabinet knob/pull, meaning the series spans both knobs and pulls. The Schaub 20016 is specifically the Quadrato collection pull, fixed at 6-5/16 inch center to center with a 6-3/4 inch overall length and 15/16 inch projection. If a drawing calls out Quadrato at 160 mm centers, the 8405 series designation alone does not confirm the same hole pattern.
4) I need more hand clearance than the Schaub 20016 gives - which pull projects further off the door?
The Schaub 20016 Quadrato projects 15/16 inch from the mounting surface. If a gloved hand or a heavier drawer calls for more standoff, the Omnia 1970 Modern Cabinet Pull carries a 1-1/4 inch projection, and both the Omnia 1969 and Omnia 1971 are 1-3/16 inch projection, all in forged solid brass.
5) What finishes does the Schaub Quadrato 20016 pull come in?
Three: Gun Metal (GM), Matte Black (MB), and Signature Satin Brass (SSB). All three are on the same zinc body, so a mixed-metal kitchen (matte black on the perimeter, satin brass on an island) uses identical hardware geometry throughout and every hole pattern stays at 160mm.
6) Is zinc cabinet hardware durable enough for a rental or a commercial millwork job?
The Quadrato 20016 is solid zinc, not plated plastic or a hollow tube, so it takes daily pulling without flexing at the posts. Zinc is a cast material though, so the finish is applied over the casting rather than being the metal itself. On a high-turnover multi-family or hospitality install where hardware gets scrubbed with abrasive cleaners, a solid brass pull holds up better to wear-through: the Deltana SBP35 Modern Square Bar Pull is solid brass and heavy-duty, and the Omnia 1968, 1969, 1970, and 1971 Modern Cabinet Pulls are forged solid brass.
7) I need a knob rather than a pull on the upper cabinet doors - what pairs with the Quadrato look?
The Schaub 20016 Quadrato is a cabinet pull with a two-point 160 mm mounting pattern, so it is not a single-hole part. For single-hole knobs, the Orca Hardware CK-17025 Blackcomb Collection square cabinet knob is 25 mm diameter and carries a square face that reads with the squared Quadrato line, while the Orca Hardware CK-15030 Bachelor Collection round knob and CK-16030 round ring knob are both 1-1/4 inch diameter for a rounded face instead.
8) What Emtek pulls give me a different design style if the Quadrato is too contemporary for the job?
The Schaub 20016 Quadrato is a contemporary-style pull. Within the Schaub collection sold under Emtek, the Art Deco Cabinet Pull carries the Art Deco series styling, the Alexander Cabinet Pull is its own Alexander series, and the Bar Cabinet Pull is a straight bar series. All three are catalogued as cabinet knob/pull, so confirm the center to center you need before ordering against a 160 mm layout.
9) For a high-traffic commercial millwork job, is there a steel pull instead of the zinc Quadrato?
The Schaub 20016 Quadrato is zinc. Where a steel body is preferred for heavy use, the Orca Hardware CK-12001 T-Pull Bar is steel in a satin nickel finish with a 2 inch bar width. The Deltana SBP35 is another heavy-duty option, built as a solid brass modern square bar pull at 3-1/2 inch. Both are bar-profile parts, so the hole pattern will differ from the 160 mm Quadrato layout.
10) Can I get the Quadrato pull in a smaller size to match across drawers and doors in the same kitchen?
The 20016 is the 6-5/16 inch center to center size in the Quadrato collection, part of the Schaub Signature line. Quadrato is built as a collection, so the same contemporary square profile runs across other center distances for upper doors and narrow drawers. Specify by collection name and the center to center you need for each opening, and hold one finish across the whole run.
11) What is the difference between the Schaub Quadrato pull and the Emtek Schaub Collection pulls?
Same design house, different catalogue lines. Quadrato is a Schaub Signature collection pull in zinc with a contemporary square profile. Emtek carries Schaub Collection pulls under its own numbers, including the Emtek 8405 Select, the Alexander, the Art Deco, and the Bar cabinet pull. Those are styling alternatives within the same family look, so if the Quadrato square profile is not the shape you want, the Bar or Alexander is where to go before leaving the family.
12) Can I match the Schaub 20016 in matte black or brass with an Omnia or Trimco pull instead?
The Schaub 20016 Quadrato comes in Gun Metal, Matte Black, and Signature Satin Brass. Among the modern-profile comparables, the Omnia 1968/102, 1969, 1970, and 1971 are forged solid brass pulls and the Orca Hardware CK-12001 T-Pull Bar is steel in satin nickel. Mixing brands across the same run means the finish tones are formulated separately, so pull a sample before committing a kitchen or a millwork package to a mixed set.
How fast can I get the Schaub 20016-GM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 20016-GM come with a warranty?
Absolutely. The Schaub 20016-GM is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 20016-GM?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 20016-GM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!