Schaub 202 Northport Flat Cabi...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$31.00
$17.95
Schaub 202 6" Center to Center Northport Flat Cabinet Pull

Schaub 202 Northport Flat Cabinet Pull, 6" Center to Center, Zinc

(No reviews yet) Write a Review

Model: 202-MB
From the Northport Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$31.00
$17.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 202 Northport Flat Cabinet Pull, 6" Center to Center, Zinc

The Schaub 202 Northport Flat Cabinet Pull brings transitional style to kitchen and bath cabinetry with a 6" center to center mounting spacing and a 7" overall length. Built from zinc with a 1-1/2" projection and 1-1/2" base dimensions, this flat pull from the Northport collection is designed to function as a dependable cabinet pull across a range of residential and light commercial cabinetry applications. The flat profile and transitional design allow it to suit both modern and traditional cabinetry schemes, and the hardware is intended to be installed using an 8/32 x 1 thread size screw.

Key Features

  • Center to Center Spacing: 6" center to center mounting matches standard cabinet drawer and door hole spacing for straightforward installation.
  • Overall Length: 7" overall length provides a comfortable, full hand grip surface for everyday cabinet use.
  • Projection: 1-1/2" projection gives clearance from the cabinet surface so fingers can easily slip behind the pull.
  • Base Dimensions: 1-1/2" base dimensions support a stable mounting footprint at each post.
  • Base Material: Zinc base material construction supports a durable, long-lasting cabinet pull suited to daily use.
  • Design Style: Transitional style from the Northport collection suits a variety of cabinetry aesthetics, from modern to traditional.
  • Thread / Screw Size: 8/32 x 1 thread size matches standard cabinet pull mounting hardware specifications.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Overall: 7"
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 6"
  • Department: Door Hardware

Typical Applications

  • Residential Kitchen Cabinetry
  • Bathroom Vanity Cabinets
  • Custom Cabinetry Projects
  • Multi-Family Residential Units
  • Commercial Office Casework
  • Hospitality Furnishings

Why Schaub 202?

Schaub cabinet pulls like the 202 pair zinc base construction with a transitional design from the Northport collection for dependable everyday use. The 6" center to center spacing, 7" overall length, and 1-1/2" projection make this flat pull a practical, versatile choice for cabinetry projects that call for a clean, functional profile.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Northport
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
7"
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Product Dimension:
1-1/2"
Product Projection:
1-1/2"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
6"
Department:
Door Hardware

Schaub 202-MB – Frequently Asked Questions

1) What is the closest equivalent to the Schaub 202 Northport pull if I need solid brass instead of zinc?
The Schaub 202 Northport flat pull is built on a zinc base with a 6 inch center-to-center and 1-1/2 inch projection. If the specification calls for solid brass, the Omnia 1968/102 is a forged solid brass cabinet pull at 4 inch center-to-center, and the Deltana SBP35 is a heavy-duty solid brass square bar pull at 3-1/2 inch. Both are shorter across the mounting holes than the 202, so a swap on an existing drilled front would mean new holes unless the fronts are undrilled.
2) I need a shallower cabinet pull than the Schaub 202 for a tight galley run. What are my options?
The Schaub 202 Northport projects 1-1/2 inch off the face of the door. For a narrower walkway, the Omnia 1970 projects 1-1/4 inch and the Omnia 1969 and Omnia 1971 each project 1-3/16 inch, all in forged solid brass. Those three give you roughly a quarter inch to five sixteenths of an inch back toward the door face per pull.
3) Can I use a Trimco 553 or 562 drawer pull in place of the Schaub 202 Northport?
Only if you are redrilling. The Schaub 202 Northport is a 6 inch center-to-center pull with a 7 inch overall length. The Trimco 553 series is 3 inch center-to-center and the Trimco 562 series comes in 3-1/2 inch, 4 inch, and 96mm center-to-center. None of those hole spacings line up with a 6 inch bore pattern, so they are alternates for a new front rather than a drop-in replacement for the 202.
4) How far does the Schaub 202 pull stand off the cabinet face?
Projection is 1-1/2 inches on the Northport 202, with a 1-1/2 inch base dimension. That is a deep-standing pull, so check clearance where a drawer or door sits next to a perpendicular wall, an appliance panel, or an inside corner run. On a tight galley it can be the difference between a knuckle clearing and not.
5) What finishes does the Schaub Northport 202 pull come in for matching a whole kitchen or unit turn?
Eight finishes across the Northport 202: Satin Nickel, Brushed Nickel, Polished Nickel, Polished Chrome, Ancient Bronze, Brushed Bronze, Matte Black, and Signature Satin Brass. That spread covers most standard multi-family and spec-home palettes, so a property manager standardizing across units can hold one collection and one finish code.
6) Is the Schaub 202 solid brass or a cast pull?
Base material on the Northport 202 is zinc, not solid brass. For a finish-critical or high-touch commercial application where solid brass is specified, the Omnia 1968/102 and Omnia 1970 are forged solid brass cabinet pulls, and the Deltana SBP35 is a solid brass bar pull.
7) Does the Schaub 202 need a flat surface, or will it work on a shaker rail?
The Northport 202 has a 1-1/2 inch base dimension at each post, so it wants a flat bearing surface at least that wide under each foot. On a shaker drawer front the flat field is usually continuous, so it mounts fine. On a five-piece door where the pull would cross from rail onto a recessed panel, the feet will not sit flush.
8) We are standardizing a multi-family cabinet package. What can we pair with the Schaub 202 Northport pull on the small doors and drawers?
The Schaub 202 Northport is a 6 inch center-to-center pull, which suits wide drawers and full-height doors. For the smaller fronts in the same package, single-hole knobs avoid a second bore: the Orca Hardware Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, and the Blackcomb Collection square knob is 25mm. Those are knobs rather than pulls, so they mount on one screw instead of the 202's two-hole pattern.
9) Can I mix the Schaub Northport 202 pull with knobs on the same kitchen?
The 202 is part of Schaub's Northport collection in a transitional style, a common approach being pulls on drawers and knobs on doors. Schaub styling also carries through Emtek's Schaub Collection lines, including the Emtek 8405 Select cabinet pulls and knobs, if you want a coordinating knob from the same design family.
10) Is there a steel bar pull alternative to the Schaub 202 for a more industrial look?
The Schaub 202 Northport is a flat transitional pull in zinc. For a heavier industrial profile, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. The 202 also offers satin nickel among its finishes, so the two can sit in the same finish family if you are mixing profiles across a kitchen and a utility run.
11) The SDC SP50 came up when I searched cabinet pulls. Will it work on a drawer front?
No. The SDC SP50 is a 50mm spindle used in door control hardware, not a cabinet pull. The Schaub 202 Northport is the cabinet pull, mounting through the drawer front on 6 inch center-to-center holes with 8/32 x 1 inch screws.
How fast can I get the Schaub 202-MB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 202-MB come with a warranty?
Absolutely. The Schaub 202-MB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 202-MB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 202-MB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!