Schaub 211 1-3/8" Northport Round Cabinet Knob

The Northport 211 knob ships with an 8/32 x 1 inch machine screw, which is the standard cabinet knob thread. A 1 inch screw covers typical 3/4 inch doors and drawer fronts with room for the boss. If you're mounting through a thicker applied-molding front or a slab over 3/4 inch, you'll want longer 8-32 screws, which are a common stock item.

Yes, in almost every case. A knob mounts on a single hole, so there's no center-to-center to match, and the 211 uses the 8-32 thread that virtually all North American cabinet knobs use. The thing to check is the base: the Northport 211 sits on a 1 inch base, so if your old knob had a wider footprint it may leave an unfinished ring on the door face.

The Deltana KRB175 is a round knob with a groove in a 1-3/4 inch diameter, solid brass and heavy-duty, which steps up from the 1-3/8 inch diameter of the Schaub 211 Northport. On wide drawer fronts and full-overlay slab doors the larger cap gives more to grip. Both are round-profile knobs, so the visual family stays consistent if you mix diameters across upper and lower cabinets in the same kitchen or unit.

The Delaney Solid Brass Cabinet Knob is a solid brass cabinet knob, where the Schaub 211 Northport uses a zinc base material. The Deltana KRB175 is also solid brass, in a round knob with groove. Base material matters in coastal and high-humidity buildings and in kitchens that get cleaned hard, so specify by material when a facility standard calls for brass throughout.

No. The Emtek 8665 is part of the Emtek SELECT series and is functioned as a cabinet knob/pull, while the Schaub 211 Northport is a cabinet knob in the Northport collection. The Emtek SELECT line carries the Schaub collection name, which is why the two get confused when searching, but they are separate part numbers with separate collections. Order by the part number that matches the collection already on the job.

Zinc is the base material. It's a cast knob, finished in eight ways, and it's a fair choice for residential and light commercial cabinetry. If you're specifying for a high-traffic institutional or hospitality setting where you want solid brass through the body, the Deltana KRB175 round knob and the Delaney solid brass cabinet knob are brass-bodied alternatives.

Eight: Satin Nickel (SN), Polished Nickel (PN), Brushed Nickel (BN), Polished Chrome (PC), Matte Black (MB), Ancient Bronze (ABZ), Brushed Bronze (BBZ), and Signature Satin Brass (SSB). That spread lets you match the knob to an existing plumbing or lighting finish across a whole unit turnover instead of settling for close enough.

1-3/8 inches is the workhorse size for cabinet doors and small to mid drawers, and the Northport 211 is right in that band. Go larger on wide, heavy drawer banks where a bigger grip helps, or run a pull instead. The Deltana KRB175 is a 1-3/4 inch round knob if you want more diameter on the same kind of opening.

The Orca Hardware CK-18032 Mission Round Cabinet Knob is a round cabinet knob in the 18-Mission Collection, which suits Craftsman and Mission casework. The Schaub 211 Northport is a transitional-style round knob. Both are cabinet knobs, so the mounting approach is the same class of hardware; the difference is the design language on the face of the cabinet.

The Emtek Astoria Glass Cabinet Knob, in the Astoria series, is a glass cabinet knob functioned as a knob/pull. The Schaub 211 Northport is a zinc knob offered in metal finishes including Satin Nickel, Polished Chrome, Matte Black and Signature Satin Brass. Where a spec calls for glass on island or upper cabinets and metal elsewhere, the Astoria and the 211 are commonly run together in one room.

The Schaub 211 Northport takes an 8/32 x 1 inch screw, which is the standard cabinet knob thread. The Orca CK-19032 Whistler and CK-18032 Mission are both cabinet knobs, as are the Emtek 8665, Allerton, Art Deco and Astoria, all functioned as cabinet knob or knob/pull, so they install into the same single bored hole in the door or drawer front. Confirm screw length against the thickness of the drawer front, since thicker slab fronts can need a longer screw than the one packed with the knob.

Northport is a transitional round knob, which is the style that sits comfortably on shaker doors without reading as either period reproduction or hard-edged modern. If you want something more clearly period, the Emtek Art Deco cabinet knob is a defined style; the Orca CK-18032 Mission round knob is the craftsman direction. Emtek's Astoria is a glass knob if you want a different material entirely.

The 211 is part of Schaub's Northport collection, so it's specified as part of a family rather than a one-off knob. For a whole-unit or whole-floor spec, order the knob in one of its eight finishes and hold that finish code across every opening. If you need knob and pull under one collection name from a single line, the Emtek SELECT 8665 is catalogued as a cabinet knob/pull.

The Emtek Art Deco Cabinet Knob, in the Art Deco series, is a cabinet knob/pull with a period-specific face, and the Emtek Allerton Cabinet Knob in the Allerton series is another patterned option. The Schaub 211 Northport is a round transitional knob with a 1-3/8 inch diameter and 1-1/8 inch projection. All three are cabinet knobs, so the decision is appearance rather than a change in hardware type.

The Orca CK-19032 Whistler is a cabinet knob from the 19-Whistler Collection. The Schaub 211 Northport is a round knob from the Northport collection, 1-3/8 inch diameter, zinc, in a transitional style, with finish options including Satin Nickel, Brushed Nickel, Polished Nickel, Ancient Bronze, Brushed Bronze and Polished Chrome. For a property manager matching what is already hung on the other cabinets, the collection name plus the finish code is what keeps a reorder consistent.