Schaub 470 1-1/4" Diameter Haniburton Cabinet Knob

The Haniburton 470 knob mounts with a #8-32 x 1 inch machine screw, which is the standard cabinet hardware thread. It drops into an existing single 3/16 inch knob bore with no redrilling. On a thicker front, a slab door plus an applied panel or a face frame drawer box, the 1 inch screw can come up short, and you would want a longer #8-32 screw to pick up full thread engagement.

The Schaub 470 Haniburton is a solid brass cabinet knob at 1-1/4 inch knob diameter with a 1-1/8 inch projection. When the door or drawer face calls for a larger grip, the Deltana KRB175 is a heavy-duty solid brass round knob at 1-3/4 inch diameter. Both are solid brass round knobs; the difference is the half-inch of diameter and the Haniburton's transitional profile versus the KRB175's plain round form.

Projection is 1-1/8 inches from the face of the door or drawer front to the outside of the knob. That matters in a tight galley or a hallway run of cabinets where a knob catches a hip or a passing cart. The base that sits against the wood is 3/8 inch, so the knob reads slim at the face and carries its mass out front rather than sprawling across the door.

Six finishes: Satin Nickel (SN), Polished Nickel (PN), Polished Chrome (PC), Matte Black (MB), Satin Brass (SB), and Unlacquered Brass (UNBR). Note the difference between the two brasses. Satin Brass is a lacquered, stable finish that stays as delivered. Unlacquered Brass is bare solid brass with no coating, so it darkens and patinas with handling. If you are matching new hardware to an existing run, or standardizing a multi-unit property where every kitchen has to look the same in five years, order Satin Brass. Order Unlacquered only if a living patina is the intent.

Solid brass through the body, not zinc die-cast with a brass wash. For a property manager or hospitality buyer that is the durability question that actually matters: a plated zinc knob chips at the edges and shows white metal after a few years of turnover cleaning, while solid brass wears through to more brass. It also means the Unlacquered Brass version can be polished back or left to darken, because the color is the material.

It should, and closely. Emtek sells the Schaub Collection under its own catalogue, including the Emtek Allerton and Art Deco cabinet knobs and the Emtek 8665 SELECT knobs. Those share Schaub's finish program, so pairing a Haniburton knob with Emtek Schaub Collection pulls on the drawers is a normal specification. Mixing across unrelated brands is where finish match gets unpredictable, particularly in satin brass and matte black, which vary noticeably maker to maker.

The Emtek Astoria glass cabinet knob is a glass-bodied cabinet knob in the Astoria series. The Schaub 470 Haniburton is solid brass throughout. The Astoria is the choice where a glass body is wanted; the 470 is the all-brass option in six finishes including unlacquered brass, satin brass, polished nickel, satin nickel, polished chrome and matte black.

Transitional, which is the deliberate middle ground: enough shape to sit comfortably on a shaker or raised-panel door, clean enough not to fight flat slab fronts. That is why it is a common pick on remodels where the cabinets are staying and only the hardware changes. If the room is committed to one end or the other, a Mission-style knob like the Orca CK-18032 leans traditional and a plain round like the Deltana KRB175 leans utilitarian.

The 470 is specified with a #8-32 x 1 inch screw, the standard machine screw for cabinet knobs. Knobs of this type ship with that screw. What is not included is a longer screw for thick or double-thickness fronts, so if any of your doors are built up past standard cabinet stock, add #8-32 screws in the length you need to the same order rather than discovering it mid-install.

One knob works across both on most cabinet runs, and using the 470 everywhere is the simplest way to keep a kitchen or a bank of vanities consistent. The practical limit is drawer width and weight. A 1-1/4 inch knob centered on a wide, loaded drawer makes the box rack as it comes out, so on drawer fronts much past two feet, or on heavy pot drawers, run a pull or two knobs spaced across the front. Knobs on the doors and pulls on the drawers is a normal mixed specification, not a mismatch.

The Orca Hardware CK-19032 Whistler cabinet knob is a cabinet knob in the 19-Whistler Collection. The Schaub 470 Haniburton is the transitional-profile knob at 1-1/4 inch diameter in solid brass. Both mount as cabinet knobs; the Whistler carries its own collection profile where the Haniburton detail is not the look being matched.

They are separate collections. The Schaub 470 is the Haniburton knob; the Emtek Allerton cabinet knob is in the Allerton series and is catalogued as a cabinet knob/pull. Finish names do not carry across brands, so where a uniform look is required across a kitchen or a unit turn, standardize on one collection rather than mixing the two.