Schaub 5024A 24" Center to Center Pub House Knurled Appliance Pull

It is built as an appliance pull, not a scaled-up cabinet pull: solid brass throughout, 1/4 inch mounting screws, and 3/4 inch bar stock. That combination is what carries the repeated pull force of a gasketed refrigerator or freezer door. A 3/16 or 8-32 screw drawer pull will loosen on that duty; the 1/4 inch fastener here is the reason this one holds.

Physically you can, but the 24 inch center-to-center spacing means both screws have to land in solid door or drawer stock 24 inches apart, which rules out almost every standard drawer front. It is sized for a tall appliance panel or a full-height pantry door. For normal cabinetry in the same look, step down to a shorter Schaub Pub House pull, or look at a small-format option like the Trimco 553 Series drawer pulls at 3 inch centers or the Trimco 562 Series, which runs 3-1/2 inch, 4 inch, and 96mm centers.

The Schaub 5024A is a 24 inch center-to-center appliance pull in solid brass with a 2 inch projection, sized for refrigerator and freezer panels. For smaller drawer and door openings in a comparable contemporary bar shape, the Emtek Bar Cabinet Pull in the Schaub Collection covers the same styling family as a cabinet knob/pull, and the Deltana SBP35 Modern Square Bar Pull is a heavy-duty solid brass bar pull at 3-1/2 inch. Both are drawer-scale pulls, so you would drill a new two-hole pattern rather than reuse a 24 inch spread.

The Schaub 5024A is built at 24 inch center-to-center with a 25-1/4 inch overall length, which is appliance-panel scale. For standard cabinet doors and drawers, the Emtek 8405 Select cabinet pull and the Emtek Bar Cabinet Pull, both in the Schaub Collection, are cabinet knob/pull products in the same design family at door and drawer sizes. The Omnia 1968/102 is another option at 4 inch center-to-center in forged solid brass.

Five: Polished Chrome (PC), Brushed Nickel (BN), Matte Black (MB), Polished Nickel (PN), and Signature Satin Brass (SSB). If you are matching the rest of a kitchen, all five are Schaub Pub House collection finishes, so the smaller Pub House pulls and knobs on the surrounding cabinetry will carry the same finish codes.

Emtek sells the Schaub Collection under its own SELECT line, so the Emtek 8405 Select cabinet pulls and knobs share the Schaub design language in cabinet-scale sizes. The Emtek Bar, Alexander, and Art Deco cabinet pulls are also Schaub Collection pieces. Those get you a coordinated kitchen without hanging a 25-1/4 inch appliance pull on a drawer front.

Solid brass is the base material, then finished in one of five platings or coatings. That matters on an appliance pull more than on a knob: zinc die-cast bar pulls at this length flex and the finish chips at the post where the hand loads it. Among other solid brass options we carry, the Omnia 1968, 1969, 1970, and 1971 cabinet pulls are forged solid brass, and the Deltana SBP35 square bar pull is solid brass as well, though those are cabinet-scale rather than appliance-scale.

The Schaub 5024A Pub House pull stands 2 inches off the face. If you need the hand to sit closer to the panel, the Omnia 1970 is a forged solid brass modern cabinet pull with a 1-1/4 inch projection, and the Omnia 1969 and Omnia 1971 both come in at 1-3/16 inch projection. Those are drawer and door pulls rather than appliance-length pulls, so plan the hole pattern accordingly.

No. The Trimco 553 Series is a drawer pull at 3 inch center-to-center and the Trimco 562 Series offers 3-1/2 inch, 4 inch, and 96mm center-to-center. The Schaub 5024A is a 24 inch center-to-center appliance pull, so neither Trimco series will span an existing 5024A hole pattern. Use the Trimco series where you want a utilitarian drawer pull, and keep the 5024A for refrigerator and panel-front applications.

The Pub House bar is knurled, meaning the 3/4 inch round stock is cross-hatched rather than smooth. On a 24 inch appliance pull that texture matters more than looks: wet or greasy hands slip on a polished round bar, and the knurl gives purchase. It is a contemporary styling detail with a practical edge, which is why it reads well in kitchens that mix modern cabinetry with warmer metals like Signature Satin Brass.

Fastener length depends on the panel you are drilling, not on the pull. The 5024A uses 1/4 inch thread, so if a custom overlay panel is thicker than what the supplied screws cover, you replace them with longer 1/4-20 machine screws of the same finish rather than looking for a different pull. Measure the panel plus any backer before you order fasteners.

Mounting orientation is up to you. The pull is a straight knurled bar with two posts at 24 inch centers and a 2 inch projection, so it hangs vertically on a refrigerator or freezer panel and horizontally across a wide drawer-front appliance equally well. The only constraint is finding 24 inches of solid panel between the two screw locations.

The Schaub 5024A ships in Polished Chrome, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. If you want a different decorative profile in the same Schaub design family, the Emtek Art Deco Cabinet Pull and the Emtek Alexander Cabinet Pull are both Schaub Collection cabinet knob/pull products with their own series styling, and the Emtek 8405 Select is the modular Select cabinet pull line.

Yes, pairing a long appliance pull with knobs on upper doors is common. The Schaub 5024A is a contemporary Pub House appliance pull in solid brass. For knobs, the Orca Hardware CK-15030 Bachelor Collection round knob and CK-16030 round ring knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob is 25mm diameter. Confirm the finish reads together before you commit the order.