Schaub 523 Menlo Park Transiti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$28.00
$18.03
Schaub 523 5" Center to Center Menlo Park Cabinet Pull

Schaub 523 Menlo Park Transitional Cabinet Pull with 5" Center to Center Spacing and 1-1/8" Projection

(No reviews yet) Write a Review

Model: 523-ABZ
From the Menlo Park Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$28.00
$18.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 523 Menlo Park Transitional Cabinet Pull with 5" Center to Center Spacing and 1-1/8" Projection

The Schaub 523 Menlo Park Cabinet Pull brings transitional style to kitchen and bathroom cabinetry with a 5" center to center mounting spacing, a 5-3/4" overall length, and a 1-1/8" projection for comfortable grip clearance. Built on a zinc base and sized with a 3/4" base dimension, this pull belongs to the Menlo Park collection and offers a clean, versatile look for drawers and doors. Installation uses an 8/32 x 1" thread / screw size, and California residents should note the Proposition 65 warning associated with this product.

Key Features

  • Center to Center: 5" center to center spacing fits standard cabinet drawer and door layouts.
  • Overall Length: 5-3/4" overall length suits a range of cabinet and drawer sizes.
  • Projection: 1-1/8" projection offers comfortable clearance for everyday grip.
  • Base Dimensions: 3/4" base dimension keeps the mounting footprint low profile.
  • Base Material: Zinc construction for everyday cabinet hardware use.
  • Style: Transitional style from the Menlo Park collection complements a range of cabinetry designs.
  • Thread / Screw Size: 8/32 x 1" for compatibility with standard cabinet hardware mounting.

Certifications & Compliance

  • Proposition 65 warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 5"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Commercial Cabinetry
  • Custom Millwork Projects
  • Closet and Storage Systems
  • Office Furniture

Why Schaub 523?

Schaub 523 cabinet pulls combine a zinc base with precise 5" center to center spacing and a 1-1/8" projection to deliver dependable, comfortable performance for everyday cabinetry use. The Menlo Park collection's transitional styling makes this pull a versatile choice for residential and commercial cabinet hardware projects, from kitchen remodels to custom millwork installations requiring consistent, coordinated hardware throughout.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Menlo Park
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
5-3/4"
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Product Dimension:
3/4"
Product Projection:
1-1/8"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
5"
Department:
Door Hardware

Schaub 523-ABZ – Frequently Asked Questions

1) What screws come with the Schaub 523 cabinet pull and what door thickness do they suit?
The 523 ships with 8/32 x 1 inch machine screws. That 1 inch length covers standard 3/4 inch cabinet door and drawer fronts with thread left to engage the post. If you are mounting through a thicker applied front or a slab with a backer, you'll need longer 8-32 screws, since the thread size is standard 8-32 and easy to source in longer lengths.
2) My drawer holes are 3 or 4 inch center-to-center, not 5. What else can I use?
The 523 is a 5 inch center-to-center pull only, so it will not reach shorter bores. For 3 inch spacing look at the Trimco 553 Series drawer pull; for 3-1/2 inch, 4 inch, or 96mm, the Trimco 562 Series covers all three. The Omnia 1968/102 is a 4 inch center-to-center forged brass pull, and the Deltana SBP35 is a 3-1/2 inch square bar pull.
3) What is a solid brass alternative to the Schaub 523 Menlo Park cabinet pull?
The Schaub 523 Menlo Park pull has a zinc base material. If a solid brass body is required by the spec, the Omnia 1969 and Omnia 1970 modern cabinet pulls are forged solid brass, and the Deltana SBP35 modern square bar pull is heavy-duty solid brass at 3-1/2 inch. Note the center spacing changes with that swap: the Menlo Park 523 is 5 inch center to center, so the mounting holes will not line up with a 3-1/2 inch pull without redrilling the door or drawer front.
4) The cabinet fronts are drilled for 4 inch centers instead of 5 inch. What pull should I use?
The Schaub 523 Menlo Park pull is fixed at 5 inch center to center, so it will not drop into a 4 inch drilling. The Omnia 1968/102 modern cabinet pull is a forged solid brass pull with 4 inch center-to-center spacing and lands on existing 4 inch holes. For narrower drawer fronts, the Trimco 562 series drawer pulls come in 3-1/2 inch, 4 inch, and 96mm center options, and the Trimco 553 series is 3 inch center to center.
5) How much hand clearance is there behind the Schaub Menlo Park 523 pull?
Projection is 1-1/8 inches off the face of the door, with a 3/4 inch base. That is enough grip clearance for a gloved hand and it keeps the pull from colliding with an adjacent door in a corner cabinet or with a countertop overhang on a top drawer. If you have a tight inside corner run, measure the swing before you commit to the whole fleet.
6) What finishes does the Schaub 523 Menlo Park pull come in?
Seven finishes: Satin Nickel (SN), Brushed Nickel (BN), Polished Nickel (PN), Polished Chrome (PC), Matte Black (MB), Ancient Bronze (ABZ), and Signature Satin Brass (SSB). For a multi-unit job where you are standardizing across kitchens and baths, the Menlo Park collection carries the same finish codes across its other sizes, so you can mix pull lengths and knobs on one finish without a color break.
7) Is the Schaub 523 pull solid brass or a cast material?
Zinc is the base material on the 523, finished in one of seven plated or coated options. Zinc casting holds crisp detail on a transitional profile and takes plating well, which is why it is common on decorative cabinet hardware. If your spec calls for solid brass specifically, look at the Omnia 1968/102 or 1969 modern pulls, which are forged solid brass, or the Deltana SBP35 square bar pull.
8) Should I use a pull like the Schaub 523 or a knob on my cabinet doors?
A 5 inch center-to-center pull like the 523 uses two screws, so it can't spin loose the way a single-screw knob can, and it gives a full-hand grip that suits heavier drawer boxes and full-overlay doors. Knobs use one bore and are quicker to install and to swap. If you want knobs on the upper doors and pulls on the drawers, the Orca Hardware Bachelor Collection round knob and its ring version are both 1-1/4 inch diameter, and the Blackcomb square knob is 25mm.
9) I need hardware for a single small door where a 5 inch pull is too long. What takes its place?
The Schaub 523 Menlo Park pull is 5-3/4 inch overall, which overruns a narrow stile or a small door. On those openings a knob mounts to a single hole instead: the Orca Hardware Bachelor Collection CK-15030 round cabinet pull knob and CK-16030 round ring pull knob are both 1-1/4 inch diameter, and the Orca Blackcomb CK-17025 is a 25mm square knob. A knob is a one-hole part, so it does not reuse the two-hole 5 inch drilling a 523 leaves behind.
10) How does the Schaub 523 Menlo Park pull compare with a modern bar pull for a contemporary kitchen?
The Schaub 523 is a transitional Menlo Park pull with a 3/4 inch base and 1-1/8 inch projection. The straight-bar alternatives read modern rather than transitional: the Deltana SBP35 is a modern square bar pull at 3-1/2 inch, the Emtek Bar cabinet pull is Emtek's Bar series, and the Orca CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel. Projection is the detail to check against the 523's 1-1/8 inch if the run has to clear an adjacent appliance handle; Omnia 1971 is 1-3/16 inch and Omnia 1970 is 1-1/4 inch.
11) Which pull matches the 1-1/8 inch projection of the Schaub 523 most closely?
The Schaub 523 Menlo Park pull projects 1-1/8 inch off the face. Among the modern forged solid brass options, the Omnia 1969 and Omnia 1971 both project 1-3/16 inch and the Omnia 1970 projects 1-1/4 inch, so each sits slightly further off the front than the 523. That matters where a drawer front passes a return wall or an adjacent door swing, and it is the dimension to confirm before mixing pulls in the same run.
12) I am standardizing pulls across an apartment turn and need one family in several sizes. What are my options?
The Schaub 523 Menlo Park pull is a single 5 inch center-to-center size offered across seven finishes including satin nickel, polished chrome, brushed nickel, matte black, polished nickel, ancient bronze, and signature satin brass, so it standardizes on finish rather than on size. If the units need more than one center spacing under one series, the Trimco 562 series drawer pulls list 3-1/2 inch, 4 inch, and 96mm centers, and the Trimco 553 series covers 3 inch centers.
13) Will the Menlo Park 523 look right with modern flat-panel or shaker cabinets?
Menlo Park is a transitional style, which is the middle ground that sits comfortably on shaker doors and on flat slab fronts alike, without reading as either traditional or strictly contemporary. If you want something firmly modern instead, the Emtek Bar cabinet pull or the Deltana SBP35 square bar pull are the straight-line options; for a period look, the Emtek Art Deco pull is the other direction.
14) Will an SDC SP50 spindle work in place of a Schaub 523 cabinet pull?
No. The SDC SP50 is a 50mm spindle, a door controls part that transfers rotation through a lock, not a surface-mounted grip. The Schaub 523 Menlo Park is a cabinet pull that fastens through the drawer or door front on 5 inch centers with 8/32 x 1 inch screws. The two do not serve the same purpose and the SP50 will not mount to a cabinet front.
How fast can I get the Schaub 523-ABZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 523-ABZ come with a warranty?
Absolutely. The Schaub 523-ABZ is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 523-ABZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 523-ABZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!