Schaub 524 Menlo Park Cabinet ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.00
$31.91
Schaub 524 10" Center to Center Menlo Park Cabinet Pull

Schaub 524 Menlo Park Cabinet Pull, 10" Center to Center, Transitional Zinc Construction

(No reviews yet) Write a Review

Model: 524-SSB
From the Menlo Park Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.00
$31.91
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 524 Menlo Park Cabinet Pull, 10" Center to Center, Transitional Zinc Construction

The Schaub 524 Menlo Park Cabinet Pull brings transitional style to kitchen and bath cabinetry with a 10" center to center mounting spacing and a 1-1/8" projection for a comfortable grip. Crafted from zinc base material, this pull measures 10-3/4" overall with a 3/4" base dimension, delivering a substantial feel at the drawer or door front. Part of the Menlo Park collection, it pairs traditional lines with a clean, updated profile suited to a range of cabinetry styles.

Key Features

  • Center to Center Spacing: 10" center to center mounting for straightforward installation on standard cabinet drawers and doors.
  • Overall Length: 10-3/4" overall length with a 1-1/8" projection for a comfortable, functional grip.
  • Base Dimensions: 3/4" base dimension provides a substantial, secure mounting footprint.
  • Zinc Construction: Zinc base material delivers durable, long-lasting performance for everyday cabinet use.
  • Transitional Style: Part of the Menlo Park collection, blending traditional and contemporary design elements for versatile cabinetry applications.
  • Thread / Screw Size: 8/32 x 1" mounting hardware specification for compatible installation.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents. Refer to manufacturer documentation for details.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • (CTC) Center-to-Center: 10"
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Residential Furniture
  • Commercial Millwork
  • Custom Cabinetry Projects
  • Drawer and Door Hardware Upgrades

Why Schaub 524?

Schaub cabinet pulls combine a durable zinc base material with precise 10" center to center construction for reliable, long-term performance. The Menlo Park collection's transitional design offers a versatile aesthetic that complements both traditional and contemporary cabinetry, making it a dependable choice for residential and commercial projects alike.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Menlo Park
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
10-3/4"
Thread / Screw Size:
8/32 x 1"
Product Function:
Cabinet Pull
Product Dimension:
3/4"
Product Projection:
1-1/8"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
10"
Department:
Door Hardware

Schaub 524-SSB – Frequently Asked Questions

1) What screws come with the Schaub 524 cabinet pull, and will they work on a thicker drawer front?
The 524 uses 8/32 x 1 inch machine screws. That length covers a standard 3/4 inch drawer front or door with thread to spare. If you are mounting to a thicker slab front, or adding a backer, you will need longer 8/32 screws, which is a stock thread size at any hardware counter.
2) Can I swap a Schaub 524 in where a shorter pull was, without redrilling?
Only if the old pull was also 10 inch center-to-center. The 524 mounts on two holes at 10 inches apart, and its 10-3/4 inch body will not cover holes drilled at 96mm, 4 inch, or any of the common shorter spacings. On a replacement job, measure hole to hole first; if the spacing does not match, you are into filling and redrilling the front or moving to a backplate.
3) What are the alternatives if I need a shorter center-to-center pull to match the Menlo Park 524 across smaller drawers?
The Schaub 524 Menlo Park pull is drilled at 10 inch center to center with a 10-3/4 inch overall length, so it is sized for wide drawer fronts and tall pantry or appliance doors. For the smaller drawers in the same run, the Trimco 553 Series drawer pull is offered at 3 inch center to center, and the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm center to center. The Omnia 1968/102 modern cabinet pull is spaced at 4 inch center to center. Any of those will land on standard shorter drawer boring rather than requiring the 10 inch spread the 524 needs.
4) The spec calls for solid brass cabinet pulls instead of zinc. What should I quote?
The Schaub 524 Menlo Park pull is built on a zinc base material. Where a job specifies solid brass, the Deltana SBP35 modern square bar pull is a heavy-duty solid brass pull at 3-1/2 inch, and the Omnia 1968/102, 1969, 1970, and 1971 modern cabinet pulls are forged solid brass. Note that those brass options come in their own center-to-center spacings rather than the 10 inch spread of the 524, so confirm the drilling on the door or drawer front before substituting.
5) Which similar-looking cabinet hardware will not drop into the two holes left by a Schaub 524?
The Schaub 524 Menlo Park pull mounts on two holes at 10 inch center to center using 8/32 x 1 inch screws. Single-hole knobs will not cover that pair of holes: the Orca Hardware Bachelor Collection round cabinet knob CK-15030 and round ring knob CK-16030 are 1-1/4 inch diameter knobs, and the Blackcomb CK-17025 is a 25mm square knob. They photograph next to pulls in the same catalog pages but replace a pull only if the front is redrilled or patched. The SDC SP50 is a 50mm spindle for door controls, not cabinet hardware at all.
6) How much clearance is there behind the Schaub 524 pull for your hand?
Projection is 1-1/8 inches off the face of the door, with a 3/4 inch base. That is enough grip clearance for a gloved hand, and it is worth checking against anything that swings past, such as an adjacent appliance panel or a door in a tight inside corner.
7) What is the Schaub 524 Menlo Park pull made of, and is zinc a problem for a rental or commercial kitchen?
Zinc base material, plated to the finish you order. Cast zinc is the normal construction for decorative cabinet pulls at this length and holds up fine to daily residential and light commercial use. If you are specifying for heavy institutional traffic and want solid brass instead, the Omnia 1968, 1969, 1970 and 1971 Cabinet Pull Series are forged solid brass, and the Deltana SBP35 square bar pull is solid brass in a 3-1/2 inch size.
8) I want to match Menlo Park across a whole kitchen. What do I order for the knobs and shorter pulls?
Menlo Park is a Schaub collection, so the way to keep a kitchen consistent is to stay inside that collection across sizes rather than mixing brands. Schaub also sells through Emtek, where the Emtek SELECT 8405 cabinet pulls, the Alexander pull, the Art Deco pull, and the Bar pull all carry the Schaub Collection designation, which is where to look if you need a coordinating profile the Menlo Park line does not offer.
9) Which cabinet pulls stand off the door about the same distance as the Schaub 524?
The Schaub 524 Menlo Park pull carries a 1-1/8 inch projection, which sets the finger clearance between the grip and the cabinet face. Among comparable modern pulls, the Omnia 1969 and Omnia 1971 both run a 1-3/16 inch projection and the Omnia 1970 runs 1-1/4 inch. All three sit within about an eighth of an inch of the 524, so hand clearance and the reveal against an adjacent inset door or a countertop overhang will read close to the same.
10) Can I get Schaub cabinet hardware styling under the Emtek label for the rest of the kitchen?
Yes. Emtek carries a Schaub Collection of cabinet pulls that sits alongside the Schaub 524 Menlo Park pull: the Emtek 8405 Select cabinet pulls, plus the Alexander, Art Deco, and Bar cabinet pulls. Each is catalogued as a cabinet knob/pull, so a single order can cover both the knobs on upper doors and the pulls on drawer banks while staying in one design family with the Menlo Park pull.
11) For a high-traffic multi-family or commercial cabinet job, what is a steel option instead of the Schaub 524?
The Schaub 524 Menlo Park pull is a transitional zinc-body pull with a 3/4 inch base dimension. Where a steel body is preferred for a heavy-use install, the Orca Hardware CK-12001 T-pull bar is steel with a 2 inch bar width in satin nickel, and the Deltana SBP35 square bar pull is a heavy-duty solid brass unit. Both read as plainer bar shapes than the Menlo Park profile, which is worth confirming with the designer if the pulls are visible in a unit turn.
12) What finishes does the Schaub 524 Menlo Park pull come in?
Seven: Satin Nickel (SN), Brushed Nickel (BN), Polished Nickel (PN), Polished Chrome (PC), Matte Black (MB), Ancient Bronze (ABZ), and Signature Satin Brass (SSB). If you are matching an existing run, order one piece in the finish first and hold it against what is on the cabinets, since satin nickel and brushed nickel read differently side by side.
13) I need matte black cabinet pulls. Does the Schaub 524 come in it, or do I need a different line?
The Schaub 524 Menlo Park pull is offered in Matte Black, along with Satin Nickel, Polished Chrome, Ancient Bronze, Brushed Nickel, Polished Nickel, and Signature Satin Brass, so no line change is needed for a black package. If the finish has to be matched to hardware already on site rather than to the 524 range, the Orca Hardware CK-12001 T-pull bar is a satin nickel steel pull, and the Emtek Schaub Collection pulls, including the 8405 Select, Alexander, Art Deco, and Bar, give another family to pull a match from.
How fast can I get the Schaub 524-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 524-SSB come with a warranty?
Absolutely. The Schaub 524-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 524-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 524-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!