Schaub 534 Menlo Park Transiti...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.00
$19.14
Schaub 534 Menlo Park 3-1/2" Center to Center Cabinet Cup Pull

Schaub 534 Menlo Park Transitional Cabinet Cup Pull, 3-1/2" Center to Center, 4-1/2" Overall

(No reviews yet) Write a Review

Model: 534-SSB
From the Menlo Park Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.00
$19.14
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schaub 534 Menlo Park Transitional Cabinet Cup Pull, 3-1/2" Center to Center, 4-1/2" Overall

The Schaub 534 Menlo Park Cabinet Cup Pull brings a transitional design to kitchen and bath cabinetry with a 3-1/2" center to center mounting spacing and a 4-1/2" overall length. Finished in a zinc base material, this cup pull offers a 1-1/4" projection for a comfortable, secure grip. Part of the Menlo Park collection, it pairs clean lines with dependable everyday function for cabinet doors and drawers.

Key Features

  • Center to Center Spacing: 3-1/2" center to center mounting for straightforward installation on standard cabinet drawers and doors.
  • Overall Length: 4-1/2" overall length provides a substantial, easy to grip pull surface.
  • Projection: 1-1/4" projection allows comfortable finger clearance when opening cabinets and drawers.
  • Base Material: Zinc construction supports consistent daily use in kitchen and bath environments.
  • Transitional Style: Menlo Park collection design bridges traditional and contemporary cabinetry aesthetics for versatile room pairings.
  • Thread / Screw Size: 8/32 mounting thread sized for standard cabinet hardware installation.
  • Function: Cup pull design offers an alternative grip style to knobs and bar pulls for varied cabinet door and drawer configurations.

Certifications & Compliance

  • Proposition 65 Warning applies for California residents.

Technical Specifications

  • Subcategory: Cabinet Pulls
  • Product Type: Cabinet Pulls
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Pulls
  • MAP Policy: Yes
  • Thread / Screw Size: 8/32"
  • Product Category: Cabinet Hardware
  • Department: Door Hardware

Typical Applications

  • Kitchen Cabinetry
  • Bathroom Vanities
  • Built-In Furniture
  • Residential Remodels
  • Custom Millwork Projects
  • Commercial Breakroom Cabinetry
  • Closet and Storage Systems

Why Schaub 534?

Schaub cabinet hardware is built with a durable zinc base material and precise 3-1/2" center to center spacing for reliable, repeatable installation across cabinet runs. The Menlo Park collection's transitional styling and comfortable 1-1/4" projection make the 534 cup pull a practical choice for everyday cabinet and drawer applications in kitchens, baths, and built-in furniture.

Manufacturer Resources

Schaub Product Catalog

Product Specs

Subcategory:
Cabinet Pulls
Collection:
Menlo Park
Product Type:
Cabinet Pulls
Product Group:
Cabinet Hardware
Product Subgroup:
Cabinet Pulls
MAP Policy:
Yes
Overall:
4-1/2"
Thread / Screw Size:
8/32"
Product Function:
Cup Pull
Product Projection:
1-1/4"
Product Style:
Transitional
Product Material:
Zinc
Product Category:
Cabinet Hardware
(CTC) Center-to-Center:
3-1/2"
Department:
Door Hardware

Schaub 534-SSB – Frequently Asked Questions

1) My drawers are drilled 3 inch or 4 inch center to center, will the Schaub 534 still work?
No. The 534 is fixed at 3-1/2 inch spacing, so 3 inch or 4 inch holes will not line up and you would be filling and redrilling the fronts. For 3 inch spacing look at the Trimco 553 Series drawer pull; the Trimco 562 Series is offered in 3-1/2 inch, 4 inch, and 96mm, which is the one to use if you have mixed spacing across a building and want a single part number.
2) Is the Schaub 534 solid brass, and what are my options if the spec calls for forged brass?
The Schaub 534 Menlo Park cup pull has a zinc base material. If the drawing calls out forged solid brass, the Omnia 1970 modern cabinet pull carries the same 1-1/4 inch projection as the 534 in forged solid brass, and the Omnia 1969 and Omnia 1971 are forged solid brass at a 1-3/16 inch projection. The Deltana SBP35 is a solid brass pull as well. Note those Omnia and Deltana pulls are bar profiles rather than the cup shape of the Menlo Park, so the look changes with the material.
3) What is the closest match to the Schaub 534 Menlo Park cup pull at the same 3-1/2 inch center-to-center spacing?
The Trimco 562 series drawer pull is offered with a 3-1/2 inch center-to-center option, so it lands on the same two-hole drilling as the Schaub 534, which is a 3-1/2 inch center-to-center cup pull. The Deltana SBP35 modern square bar pull is also a 3-1/2 inch pull, in solid brass. The difference is shape and grip: the Schaub 534 is a cup pull with a 1-1/4 inch projection and a 4-1/2 inch overall length, where the Deltana SBP35 is a square bar profile you wrap your whole hand around. If the existing drawer fronts are already bored at 3-1/2 inches, any of the three drop onto the same holes.
4) My drawers are drilled at 3 inch centers, not 3-1/2. What pull should I use instead of the Schaub 534?
The Schaub 534 Menlo Park is a fixed 3-1/2 inch center-to-center cup pull, so it will not land on 3 inch holes without redrilling. The Trimco 553 series drawer pull is built at 3 inch center-to-center and drops straight onto that existing bore. If you would rather keep the option open, the Trimco 562 series covers 3-1/2 inch, 4 inch and 96mm spacings, so it is the one to specify when the drilling varies across a run of cabinets.
5) What looks like a substitute for the Schaub 534 cup pull but will not work on the same drilling?
Single-hole knobs are the main trap. The Orca Hardware CK-15030 and CK-16030 Bachelor Collection round knobs at 1-1/4 inch diameter and the CK-17025 Blackcomb square knob at 25mm are cabinet knobs, which mount on one screw hole. The Schaub 534 Menlo Park is a two-hole cup pull at 3-1/2 inch center-to-center using 8/32 screws, so swapping to a knob leaves an open hole in the drawer front. The Orca CK-12001 T-pull bar is a pull but a 2 inch bar-width profile, a different look and drilling from a cup pull.
6) What screw size does the Schaub 534 cup pull take, and will longer screws work for thick drawer fronts?
The 534 cup pull is tapped 8/32, the standard cabinet hardware machine screw thread. That means any 8-32 machine screw will thread into it, so if you are mounting through a thick or built-up drawer front you can substitute a longer 8-32 screw and still use the pull as supplied.
7) How far does the Schaub 534 stick out from the drawer front?
Projection is 1-1/4 inches. That is the clearance you need to allow in a galley or between an island drawer bank and a facing run, and it is enough grip depth for a hand in a work glove on a heavy drawer.
8) What finishes does the Schaub 534 Menlo Park cup pull come in?
Seven finishes: Satin Nickel, Polished Chrome, Ancient Bronze, Brushed Nickel, Matte Black, Polished Nickel, and Signature Satin Brass. That covers the usual pairings, warm brass or black for a transitional kitchen, nickel or chrome where the appliances and faucet are already cool-toned. If you are standardizing a multi-unit or hospitality package, pick one finish code and carry it across knobs and pulls in the same Menlo Park collection.
9) Should I use a cup pull or a bar pull on kitchen drawers?
A cup pull like the Schaub 534 is gripped from underneath, so it reads traditional to transitional and works well on drawer banks and shallow apron drawers. It does not work on doors that swing, since there is no comfortable pull direction. Use a bar or T-pull where you need the same hardware on both doors and drawers, for example the Deltana SBP35 square bar pull at the same 3-1/2 inch spacing, the Orca CK-12001 T-pull bar, or the Omnia 1970 modern pull at a matching 1-1/4 inch projection.
10) Is the Schaub 534 the same as the Schaub pulls sold under the Emtek name?
They are related but not the same part. Emtek sells a Schaub Collection line, including the Emtek 8405 SELECT cabinet pulls and the Alexander, Art Deco, and Bar cabinet pulls. Those are separate designs with their own spacing and projection. If you need the Menlo Park cup pull profile at 3-1/2 inch spacing with a 1-1/4 inch projection, order the Schaub 534 itself rather than substituting from the Emtek line.
11) I want to pair cup pulls on drawers with something on the upper cabinet doors. What goes with the Schaub 534?
The usual approach is cup pulls on drawers and knobs on doors. The Orca Hardware Bachelor Collection round knob CK-15030 at 1-1/4 inch diameter and the ring version CK-16030 pair with the Schaub 534 Menlo Park, which is a transitional cup pull; for a squarer read, the Orca Blackcomb CK-17025 square knob at 25mm. The Schaub 534 comes in Satin Nickel, Polished Chrome, Ancient Bronze, Brushed Nickel, Matte Black, Polished Nickel and Signature Satin Brass, so match the knob finish family to whichever you run on the drawers.
12) I need a 4 inch center-to-center pull for wider drawers. What matches up with the Schaub 534?
For a 4 inch bore, the Omnia 1968/102 modern cabinet pull is built at 4 inch center-to-center in forged solid brass, and the Trimco 562 series includes a 4 inch option alongside its 3-1/2 inch. The Schaub 534 Menlo Park itself is only a 3-1/2 inch center-to-center cup pull, so a common approach on a kitchen with mixed drawer widths is the 534 on the narrow banks and a 4 inch pull on the wide ones.
13) Does the Emtek Schaub Collection have a cup pull equivalent to the Schaub 534 Menlo Park?
Emtek's Schaub Collection pulls are catalogued by series rather than by the Menlo Park name: the Emtek 8405 SELECT, Alexander, Art Deco and Bar cabinet pulls are all listed as cabinet knob/pull under that collection. None of them carries the Menlo Park series designation, so if a job was specified as Menlo Park the Schaub 534 is the item to order. If you are matching a transitional style rather than a specific series, the Emtek Alexander and Art Deco pulls are the closest in intent within that collection.
14) Which pull has the same projection off the drawer face as the Schaub 534?
The Schaub 534 Menlo Park cup pull projects 1-1/4 inch from the face, and the Omnia 1970 forged solid brass cabinet pull carries that same 1-1/4 inch projection. The Omnia 1969 and Omnia 1971 sit slightly tighter at 1-3/16 inch. Projection matters where drawers run beside an appliance door or in a tight galley, so if clearance was checked against the 534 the Omnia 1970 is the direct swap on that dimension.
How fast can I get the Schaub 534-SSB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schaub 534-SSB come with a warranty?
Absolutely. The Schaub 534-SSB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schaub 534-SSB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schaub 534-SSB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!